3d Printing In Oral Maxillofacial Surgery eBook Download PDF

Download 3d Printing In Oral Maxillofacial Surgery full books in PDF, epub, and Kindle. Read online 3d Printing In Oral Maxillofacial Surgery ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!

3D Printing in Oral & Maxillofacial Surgery

Author: Lobat Tayebi

Publisher: Springer Nature

Published: 2021-08-24

Total Pages: 223

ISBN-13: 3030777871

DOWNLOAD EBOOK

This book is a comprehensive guide to 3D printing and 3D bioprinting methods and their application in oral and maxillofacial surgeries. Among the 3D printing methods considered are fused deposition modeling, selective laser sintering, photopolymer jetting, powder binder printing, and stereolithography, while the coverage of 3D bioprinting encompasses inkjet, microextrusion, and laser techniques. In each case, the relevance of the technique to oral and maxillofacial surgery is explained. In addition, the available inks and bioinks for 3D printing are reviewed. The roles of soft and hard tissue printing in oral and maxillofacial tissue engineering and the use of 3D printing in multi- and interfacial tissue engineering are then examined in depth. The particular value of 3D printing in the treatment of critically sized defects is discussed separately. Finally, up-to-date information is provided on guided tissue/bone regeneration using 3D printing. The book will be of interest to both oral and maxillofacial surgeons and biomedical engineers.

Book Synopsis 3D Printing in Oral & Maxillofacial Surgery by : Lobat Tayebi

Download or read book 3D Printing in Oral & Maxillofacial Surgery written by Lobat Tayebi and published by Springer Nature. This book was released on 2021-08-24 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive guide to 3D printing and 3D bioprinting methods and their application in oral and maxillofacial surgeries. Among the 3D printing methods considered are fused deposition modeling, selective laser sintering, photopolymer jetting, powder binder printing, and stereolithography, while the coverage of 3D bioprinting encompasses inkjet, microextrusion, and laser techniques. In each case, the relevance of the technique to oral and maxillofacial surgery is explained. In addition, the available inks and bioinks for 3D printing are reviewed. The roles of soft and hard tissue printing in oral and maxillofacial tissue engineering and the use of 3D printing in multi- and interfacial tissue engineering are then examined in depth. The particular value of 3D printing in the treatment of critically sized defects is discussed separately. Finally, up-to-date information is provided on guided tissue/bone regeneration using 3D printing. The book will be of interest to both oral and maxillofacial surgeons and biomedical engineers.

A Textbook of Advanced Oral and Maxillofacial Surgery

Author: Mohammad Hosein Motamedi

Publisher: BoD – Books on Demand

Published: 2016-08-31

Total Pages: 838

ISBN-13: 9535125907

DOWNLOAD EBOOK

Advanced oral and maxillofacial surgery encompasses a vast array of diseases, disorders, defects, and deformities as well as injuries of the mouth, head, face, and jaws. It relates not only to treatment of impacted teeth, facial pain, misaligned jaws, facial trauma, oral cancers, jaw cysts, and tumors but also to facial cosmetic surgery and placement of dental and facial implants. This specialty is evolving alongside advancements in technology and instrumentation. Volume 1 has topped 132,000 chapter downloads so far, and Volume 2 is being downloaded at the same pace! Volume 3 is basically the sequel to Volumes 1 and 2; 93 specialists from nine countries contributed to 32 chapters providing comprehensive coverage of advanced topics in OMF surgery.

Book Synopsis A Textbook of Advanced Oral and Maxillofacial Surgery by : Mohammad Hosein Motamedi

Download or read book A Textbook of Advanced Oral and Maxillofacial Surgery written by Mohammad Hosein Motamedi and published by BoD – Books on Demand. This book was released on 2016-08-31 with total page 838 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced oral and maxillofacial surgery encompasses a vast array of diseases, disorders, defects, and deformities as well as injuries of the mouth, head, face, and jaws. It relates not only to treatment of impacted teeth, facial pain, misaligned jaws, facial trauma, oral cancers, jaw cysts, and tumors but also to facial cosmetic surgery and placement of dental and facial implants. This specialty is evolving alongside advancements in technology and instrumentation. Volume 1 has topped 132,000 chapter downloads so far, and Volume 2 is being downloaded at the same pace! Volume 3 is basically the sequel to Volumes 1 and 2; 93 specialists from nine countries contributed to 32 chapters providing comprehensive coverage of advanced topics in OMF surgery.

Digital Technologies in Oral and Maxillofacial Surgery, An Issue of Atlas of the Oral and Maxillofacial Surgery Clinics

Author: Gary P. Orentlicher

Publisher: Elsevier Health Sciences

Published: 2012-03-28

Total Pages: 168

ISBN-13: 1455742678

DOWNLOAD EBOOK

Cutting edge information for all oral and maxillofacial surgeons on computed tomography and guided surgery! Topics include comparison of CT and cone beam technologies, stereolithographic modeling and surgical guide concepts, virtual technologies in dentoalveolar evaluation and surgery, computer guided planning and placement of dental implants, utilization in the treatment of facial trauma, digital technologies in pathology and reconstruction, 3D technologies in craniofacial and orthognathic surgery, evaluation and fabrication of custom cosmetic facial implants, and extraoral craniofacial applications.

Book Synopsis Digital Technologies in Oral and Maxillofacial Surgery, An Issue of Atlas of the Oral and Maxillofacial Surgery Clinics by : Gary P. Orentlicher

Download or read book Digital Technologies in Oral and Maxillofacial Surgery, An Issue of Atlas of the Oral and Maxillofacial Surgery Clinics written by Gary P. Orentlicher and published by Elsevier Health Sciences. This book was released on 2012-03-28 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cutting edge information for all oral and maxillofacial surgeons on computed tomography and guided surgery! Topics include comparison of CT and cone beam technologies, stereolithographic modeling and surgical guide concepts, virtual technologies in dentoalveolar evaluation and surgery, computer guided planning and placement of dental implants, utilization in the treatment of facial trauma, digital technologies in pathology and reconstruction, 3D technologies in craniofacial and orthognathic surgery, evaluation and fabrication of custom cosmetic facial implants, and extraoral craniofacial applications.

3D Printing in Plastic Reconstructive and Aesthetic Surgery

Author: Luigi Di Rosa

Publisher: Springer Nature

Published: 2022-09-19

Total Pages: 145

ISBN-13: 3031105583

DOWNLOAD EBOOK

This handy volume illustrates the basics of clinical three-dimensional (3D) printing, addressing the practical aspects of establishing a simple and effective 3D printing service in a medical facility. No longer confined to makers and workshops, this very recent technology has been fast developing and rapid prototyping has proven its potential in the clinical field as well, leading to new approaches. The declared aim of this work is enabling medical professionals to create bespoke anatomical models from a series of CT or MRI images, and assisting them in choosing the best suited 3D printers and materials for each specific clinical need. The text includes original, full-color step-by-step photos for better guidance, and a complete review of related publications in literature. Single chapters devoted to specific areas of 3D printing application, such as rhinoplasty, ear reconstruction, oculoplasty, maxillofacial surgery, as well as for surgical simulations. Contents are completed by a review of the legal aspects and the safety and quality considerations, as well as a thorough examination of the variety of 3D printers, compatible materials as filaments and resins, and including the available online resources. Plastic, Ophthalmologic and Maxillofacial surgeons, and professionals dealing with surgical reconstruction, will find this guide to be a valuable companion for the understanding of 3D printing in clinical practice.

Book Synopsis 3D Printing in Plastic Reconstructive and Aesthetic Surgery by : Luigi Di Rosa

Download or read book 3D Printing in Plastic Reconstructive and Aesthetic Surgery written by Luigi Di Rosa and published by Springer Nature. This book was released on 2022-09-19 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handy volume illustrates the basics of clinical three-dimensional (3D) printing, addressing the practical aspects of establishing a simple and effective 3D printing service in a medical facility. No longer confined to makers and workshops, this very recent technology has been fast developing and rapid prototyping has proven its potential in the clinical field as well, leading to new approaches. The declared aim of this work is enabling medical professionals to create bespoke anatomical models from a series of CT or MRI images, and assisting them in choosing the best suited 3D printers and materials for each specific clinical need. The text includes original, full-color step-by-step photos for better guidance, and a complete review of related publications in literature. Single chapters devoted to specific areas of 3D printing application, such as rhinoplasty, ear reconstruction, oculoplasty, maxillofacial surgery, as well as for surgical simulations. Contents are completed by a review of the legal aspects and the safety and quality considerations, as well as a thorough examination of the variety of 3D printers, compatible materials as filaments and resins, and including the available online resources. Plastic, Ophthalmologic and Maxillofacial surgeons, and professionals dealing with surgical reconstruction, will find this guide to be a valuable companion for the understanding of 3D printing in clinical practice.

3D Printing for the Radiologist, E-Book

Author: Nicole Wake

Publisher: Elsevier Health Sciences

Published: 2021-05-27

Total Pages: 242

ISBN-13: 0323775748

DOWNLOAD EBOOK

Comprehensive, yet concise, 3D Printing for the Radiologist presents an overview of three-dimensional printing at the point of care. Focusing on opportunities and challenges in radiology practice, this up-to-date reference covers computer-aided design principles, quality assurance, training, and guidance for integrating 3D printing across radiology subspecialties. Practicing and trainee radiologists, surgeons, researchers, and imaging specialists will find this an indispensable resource for furthering their understanding of the current state and future outlooks for 3D printing in clinical medicine. Covers a wide range of topics, including basic principles of 3D printing, quality assurance, regulatory perspectives, and practical implementation in medical training and practice. Addresses the challenges associated with 3D printing integration in clinical settings, such as reimbursement, regulatory issues, and training. Features concise chapters from a team of multidisciplinary chapter authors, including practicing radiologists, researchers, and engineers. Consolidates today’s available information on this timely topic into a single, convenient, resource.

Book Synopsis 3D Printing for the Radiologist, E-Book by : Nicole Wake

Download or read book 3D Printing for the Radiologist, E-Book written by Nicole Wake and published by Elsevier Health Sciences. This book was released on 2021-05-27 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive, yet concise, 3D Printing for the Radiologist presents an overview of three-dimensional printing at the point of care. Focusing on opportunities and challenges in radiology practice, this up-to-date reference covers computer-aided design principles, quality assurance, training, and guidance for integrating 3D printing across radiology subspecialties. Practicing and trainee radiologists, surgeons, researchers, and imaging specialists will find this an indispensable resource for furthering their understanding of the current state and future outlooks for 3D printing in clinical medicine. Covers a wide range of topics, including basic principles of 3D printing, quality assurance, regulatory perspectives, and practical implementation in medical training and practice. Addresses the challenges associated with 3D printing integration in clinical settings, such as reimbursement, regulatory issues, and training. Features concise chapters from a team of multidisciplinary chapter authors, including practicing radiologists, researchers, and engineers. Consolidates today’s available information on this timely topic into a single, convenient, resource.

3D Printing in Medicine

Author: Frank J. Rybicki

Publisher: Springer

Published: 2017-09-27

Total Pages: 138

ISBN-13: 3319619241

DOWNLOAD EBOOK

This book describes the fundamentals of three-dimensional (3D) printing, addresses the practical aspects of establishing a 3D printing service in a medical facility, and explains the enormous potential value of rendering images as 3D printed models capable of providing tactile feedback and tangible information on both anatomic and pathologic states. Individual chapters also focus on selected areas of applications for 3D printing, including musculoskeletal, craniomaxillofacial, cardiovascular, and neurosurgery applications. Challenges and opportunities related to training, materials and equipment, and guidelines are addressed, and the overall costs of a 3D printing lab and the balancing of these costs against clinical benefits are discussed. Radiologists, surgeons, and other physicians will find this book to be a rich source of information on the practicalities and expanding medical applications of 3D printing.

Book Synopsis 3D Printing in Medicine by : Frank J. Rybicki

Download or read book 3D Printing in Medicine written by Frank J. Rybicki and published by Springer. This book was released on 2017-09-27 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the fundamentals of three-dimensional (3D) printing, addresses the practical aspects of establishing a 3D printing service in a medical facility, and explains the enormous potential value of rendering images as 3D printed models capable of providing tactile feedback and tangible information on both anatomic and pathologic states. Individual chapters also focus on selected areas of applications for 3D printing, including musculoskeletal, craniomaxillofacial, cardiovascular, and neurosurgery applications. Challenges and opportunities related to training, materials and equipment, and guidelines are addressed, and the overall costs of a 3D printing lab and the balancing of these costs against clinical benefits are discussed. Radiologists, surgeons, and other physicians will find this book to be a rich source of information on the practicalities and expanding medical applications of 3D printing.

3D Printing In Dentistry

Author: Dr. Neha Singh

Publisher: DENTOMED PUBLICATION HOUSE

Published: 2021-08-03

Total Pages: 132

ISBN-13: 9391369286

DOWNLOAD EBOOK

Book Synopsis 3D Printing In Dentistry by : Dr. Neha Singh

Download or read book 3D Printing In Dentistry written by Dr. Neha Singh and published by DENTOMED PUBLICATION HOUSE. This book was released on 2021-08-03 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:

3D Printing in Bone Surgery

Author: Carmine Zoccali

Publisher: Springer Nature

Published: 2022-03-05

Total Pages: 177

ISBN-13: 3030919005

DOWNLOAD EBOOK

Filling a gap in the literature, this is the first book to comprehensively discuss 3D printing applied to bone surgery. It provides both the scientific basics and practical applications, with a special focus on 3D-printed, custom-made titanium prostheses (3DPCMP) used for bone reconstruction following tumor resection. Initially applied to pelvic and scapular prostheses – because of their of highly complex anatomy – this technology is increasingly being adopted in other fields of orthopedics, such as limb surgery, traumatology and degenerative diseases. Throughout the book, experts from various fields share their knowledge, describing 3D printing applied to the reconstruction of different bone segments, reviewing each application and comparing it with traditional reconstruction. They also present real-world case studies from their clinical practice. Uniquely responding to the growing interest surrounding 3D printing for bone reconstruction, this book is invaluable for orthopedic, neuro- , head and neck as well as maxillofacial surgeons wishing to gain insights into this new and promising field.

Book Synopsis 3D Printing in Bone Surgery by : Carmine Zoccali

Download or read book 3D Printing in Bone Surgery written by Carmine Zoccali and published by Springer Nature. This book was released on 2022-03-05 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling a gap in the literature, this is the first book to comprehensively discuss 3D printing applied to bone surgery. It provides both the scientific basics and practical applications, with a special focus on 3D-printed, custom-made titanium prostheses (3DPCMP) used for bone reconstruction following tumor resection. Initially applied to pelvic and scapular prostheses – because of their of highly complex anatomy – this technology is increasingly being adopted in other fields of orthopedics, such as limb surgery, traumatology and degenerative diseases. Throughout the book, experts from various fields share their knowledge, describing 3D printing applied to the reconstruction of different bone segments, reviewing each application and comparing it with traditional reconstruction. They also present real-world case studies from their clinical practice. Uniquely responding to the growing interest surrounding 3D printing for bone reconstruction, this book is invaluable for orthopedic, neuro- , head and neck as well as maxillofacial surgeons wishing to gain insights into this new and promising field.

Emerging Technologies in Oral and Maxillofacial Surgery

Author: Arash Khojasteh

Publisher: Springer Nature

Published: 2023-07-25

Total Pages: 376

ISBN-13: 9811986029

DOWNLOAD EBOOK

This book covers the application of emerging technologies, occurring after the 4th industrial revolution, in oral and maxillofacial surgery (OMFS) and introduces a new era of personalized medicine in this discipline. It describes the manufacturing and data acquisition methods, in detail, including the advantages and disadvantages of each process. The workflow of using the emerging technologies in reconstructive treatments, orthognathic surgery, implant dentistry, robotic surgery and bio‐fabrication have been covered in separate chapters. Several related cases in conjunction with the workflow are presented and discussed as clinical examples of each, for practical discussion of the workflow and process trajectory. Each chapters provides introduction, definition, application and plausible pitfalls of employing these technologies in specific areas. Given the multiple materials and techniques, the logic behind selection of each in different fields of practice and thorough explanation of process provides surgeons with a background on how and why a certain approach is employed, and if application of emerging technologies would outdo traditional treatment processes. The importance of fabricating living tissues is discussed as one of the most recent progresses in the field. The bench-to-bedside transition, their clinical application, and their remarkable positive impact on oral and maxillofacial surgical procedures are covered. This book is arranged for oral and maxillofacial, and plastic surgeons and in-training-fellows in associated fields.

Book Synopsis Emerging Technologies in Oral and Maxillofacial Surgery by : Arash Khojasteh

Download or read book Emerging Technologies in Oral and Maxillofacial Surgery written by Arash Khojasteh and published by Springer Nature. This book was released on 2023-07-25 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the application of emerging technologies, occurring after the 4th industrial revolution, in oral and maxillofacial surgery (OMFS) and introduces a new era of personalized medicine in this discipline. It describes the manufacturing and data acquisition methods, in detail, including the advantages and disadvantages of each process. The workflow of using the emerging technologies in reconstructive treatments, orthognathic surgery, implant dentistry, robotic surgery and bio‐fabrication have been covered in separate chapters. Several related cases in conjunction with the workflow are presented and discussed as clinical examples of each, for practical discussion of the workflow and process trajectory. Each chapters provides introduction, definition, application and plausible pitfalls of employing these technologies in specific areas. Given the multiple materials and techniques, the logic behind selection of each in different fields of practice and thorough explanation of process provides surgeons with a background on how and why a certain approach is employed, and if application of emerging technologies would outdo traditional treatment processes. The importance of fabricating living tissues is discussed as one of the most recent progresses in the field. The bench-to-bedside transition, their clinical application, and their remarkable positive impact on oral and maxillofacial surgical procedures are covered. This book is arranged for oral and maxillofacial, and plastic surgeons and in-training-fellows in associated fields.

Tissue Engineering in Oral and Maxillofacial Surgery

Author: Riitta Seppänen-Kaijansinkko

Publisher: Springer Nature

Published: 2019-12-02

Total Pages: 169

ISBN-13: 3030245179

DOWNLOAD EBOOK

This book provides a thorough, up-to-date description of the scientific basis and concepts of tissue engineering in the oral and maxillofacial region. The opening chapters present an introduction to tissue engineering, describe the roles of biomaterials and stem cells, discuss the use of growth factors, and examine potential adverse reactions. The challenges of soft and hard tissue engineering for oral and maxillofacial reconstruction are then considered in detail. It is explained what has been achieved to date, and potential future perspectives are explored. The importance and the verification of adequate vascularization are discussed, and a further focus is the use of 3D printing, both in the planning and production of scaffolds and in the bioprinting of cells and biomaterials. Information is also included on safety, efficacy, and regulatory aspects. Tissue Engineering in Oral and Maxillofacial Surgery will be of interest to all researchers and practitioners who wish to learn more about the potential of tissue engineering to revolutionize practice in oral and maxillofacial surgery.

Book Synopsis Tissue Engineering in Oral and Maxillofacial Surgery by : Riitta Seppänen-Kaijansinkko

Download or read book Tissue Engineering in Oral and Maxillofacial Surgery written by Riitta Seppänen-Kaijansinkko and published by Springer Nature. This book was released on 2019-12-02 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough, up-to-date description of the scientific basis and concepts of tissue engineering in the oral and maxillofacial region. The opening chapters present an introduction to tissue engineering, describe the roles of biomaterials and stem cells, discuss the use of growth factors, and examine potential adverse reactions. The challenges of soft and hard tissue engineering for oral and maxillofacial reconstruction are then considered in detail. It is explained what has been achieved to date, and potential future perspectives are explored. The importance and the verification of adequate vascularization are discussed, and a further focus is the use of 3D printing, both in the planning and production of scaffolds and in the bioprinting of cells and biomaterials. Information is also included on safety, efficacy, and regulatory aspects. Tissue Engineering in Oral and Maxillofacial Surgery will be of interest to all researchers and practitioners who wish to learn more about the potential of tissue engineering to revolutionize practice in oral and maxillofacial surgery.