A Hands-on Course in Sensors Using the Arduino and Raspberry Pi

A Hands-on Course in Sensors Using the Arduino and Raspberry Pi

Author: Volker Ziemann (Associate professor of physics)

Publisher:

Published: 2018

Total Pages:

ISBN-13: 9781351188289

DOWNLOAD EBOOK

"Based on the author's successful course, with contents carefully crafted in light of feedback from reviewers, this is the first book to give a practical and wide-ranging account of how to interface sensors and actuators with micro-controllers (Arduino), Raspberry Pi and EPICS. The author describes the progression of raw signals through conditioning stages, digitization, data storage and presentation. Sections on switches and motors, which cover basic robotics, are also included. All steps are illustrated with handson examples, based on inexpensive hardware. The book is suitable for advanced undergraduate and graduate students in physics and electrical engineering, as well as for hobbyists"--


Book Synopsis A Hands-on Course in Sensors Using the Arduino and Raspberry Pi by : Volker Ziemann (Associate professor of physics)

Download or read book A Hands-on Course in Sensors Using the Arduino and Raspberry Pi written by Volker Ziemann (Associate professor of physics) and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: "Based on the author's successful course, with contents carefully crafted in light of feedback from reviewers, this is the first book to give a practical and wide-ranging account of how to interface sensors and actuators with micro-controllers (Arduino), Raspberry Pi and EPICS. The author describes the progression of raw signals through conditioning stages, digitization, data storage and presentation. Sections on switches and motors, which cover basic robotics, are also included. All steps are illustrated with handson examples, based on inexpensive hardware. The book is suitable for advanced undergraduate and graduate students in physics and electrical engineering, as well as for hobbyists"--


A Hands-On Course in Sensors Using the Arduino and Raspberry Pi

A Hands-On Course in Sensors Using the Arduino and Raspberry Pi

Author: Volker Ziemann

Publisher: CRC Press

Published: 2023-08-04

Total Pages: 311

ISBN-13: 1000909204

DOWNLOAD EBOOK

A Hands-On Course in Sensors Using the Arduino and Raspberry Pi is the first book to give a practical and wide-ranging account of how to interface sensors and actuators with micro-controllers, Raspberry Pi and other control systems. The author describes the progression of raw signals through conditioning stages, digitization, data storage and presentation. The collection, processing, and understanding of sensor data plays a central role in industrial and scientific activities. This book builds simplified models of large industrial or scientific installations that contain hardware and other building blocks, including services for databases, web servers, control systems, and messaging brokers. A range of case studies are included within the book, including a weather station, ground-vibration measurements, impedance measurements, interfacing medical sensors to web browsers, the profile of a laser beam, and a remote-controlled and fire-seeking robot. This second edition has been updated throughout to reflect new hardware and software releases since the book was first published. Newly added features include the ESP32 microcontroller, several environmental and medical sensors, actuators for signal generation, as well as a chapter on web sockets; all illustrated in new case studies. This book is suitable for advanced undergraduate and graduate students taking hands-on laboratory courses in physics and engineering. Hobbyists in robotics clubs and other enthusiasts will also find this book of interest. Features: Includes practical, hands-on exercises that can be conducted in student labs, or even at home Covers the latest software and hardware, and all code featured in examples is discussed in detail All steps are illustrated with practical examples and case studies to enhance learning https://github.com/volkziem/HandsOnSensors2ed Volker Ziemann obtained his PhD in accelerator physics from Dortmund University in 1990. After post-doctoral positions in Stanford at SLAC and in Geneva at CERN, where he worked on the design of the LHC, in 1995 he moved to Uppsala where he worked at the electron-cooler storage ring CELSIUS. In 2005 he moved to the physics department where he has since taught physics. He was responsible for several accelerator physics projects at CERN, DESY and XFEL. In 2014 he received the Thuréus prize from the Royal Society of Sciences in Uppsala.


Book Synopsis A Hands-On Course in Sensors Using the Arduino and Raspberry Pi by : Volker Ziemann

Download or read book A Hands-On Course in Sensors Using the Arduino and Raspberry Pi written by Volker Ziemann and published by CRC Press. This book was released on 2023-08-04 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Hands-On Course in Sensors Using the Arduino and Raspberry Pi is the first book to give a practical and wide-ranging account of how to interface sensors and actuators with micro-controllers, Raspberry Pi and other control systems. The author describes the progression of raw signals through conditioning stages, digitization, data storage and presentation. The collection, processing, and understanding of sensor data plays a central role in industrial and scientific activities. This book builds simplified models of large industrial or scientific installations that contain hardware and other building blocks, including services for databases, web servers, control systems, and messaging brokers. A range of case studies are included within the book, including a weather station, ground-vibration measurements, impedance measurements, interfacing medical sensors to web browsers, the profile of a laser beam, and a remote-controlled and fire-seeking robot. This second edition has been updated throughout to reflect new hardware and software releases since the book was first published. Newly added features include the ESP32 microcontroller, several environmental and medical sensors, actuators for signal generation, as well as a chapter on web sockets; all illustrated in new case studies. This book is suitable for advanced undergraduate and graduate students taking hands-on laboratory courses in physics and engineering. Hobbyists in robotics clubs and other enthusiasts will also find this book of interest. Features: Includes practical, hands-on exercises that can be conducted in student labs, or even at home Covers the latest software and hardware, and all code featured in examples is discussed in detail All steps are illustrated with practical examples and case studies to enhance learning https://github.com/volkziem/HandsOnSensors2ed Volker Ziemann obtained his PhD in accelerator physics from Dortmund University in 1990. After post-doctoral positions in Stanford at SLAC and in Geneva at CERN, where he worked on the design of the LHC, in 1995 he moved to Uppsala where he worked at the electron-cooler storage ring CELSIUS. In 2005 he moved to the physics department where he has since taught physics. He was responsible for several accelerator physics projects at CERN, DESY and XFEL. In 2014 he received the Thuréus prize from the Royal Society of Sciences in Uppsala.


Make: Sensors

Make: Sensors

Author: Tero Karvinen

Publisher: Maker Media, Inc.

Published: 2014-05-06

Total Pages: 722

ISBN-13: 1449368069

DOWNLOAD EBOOK

Make: Sensors is the definitive introduction and guide to the sometimes-tricky world of using sensors to monitor the physical world. With dozens of projects and experiments for you to build, this book shows you how to build sensor projects with both Arduino and Raspberry Pi. Use Arduino when you need a low-power, low-complexity brain for your sensor, and choose Raspberry Pi when you need to perform additional processing using the Linux operating system running on that device.You'll learn about touch sensors, light sensors, accelerometers, gyroscopes, magnetic sensors, as well as temperature, humidity, and gas sensors.


Book Synopsis Make: Sensors by : Tero Karvinen

Download or read book Make: Sensors written by Tero Karvinen and published by Maker Media, Inc.. This book was released on 2014-05-06 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: Make: Sensors is the definitive introduction and guide to the sometimes-tricky world of using sensors to monitor the physical world. With dozens of projects and experiments for you to build, this book shows you how to build sensor projects with both Arduino and Raspberry Pi. Use Arduino when you need a low-power, low-complexity brain for your sensor, and choose Raspberry Pi when you need to perform additional processing using the Linux operating system running on that device.You'll learn about touch sensors, light sensors, accelerometers, gyroscopes, magnetic sensors, as well as temperature, humidity, and gas sensors.


Role of Single Board Computers (SBCs) in rapid IoT Prototyping

Role of Single Board Computers (SBCs) in rapid IoT Prototyping

Author: G. R. Kanagachidambaresan

Publisher: Springer Nature

Published: 2021-05-28

Total Pages: 233

ISBN-13: 3030729575

DOWNLOAD EBOOK

This book presents how to program Single Board Computers (SBCs) for Internet of Things (IoT) rapid prototyping with popular tools such as Raspberry Pi, Arduino, Beagle Bone, and NXP boards. The book provides novel programs to solve new technological real-time problems. The author addresses programming, PCB design and Mechanical Cad design all in single volume, easing learners into incorporating their ideas as prototype. The aim of the book is to provide programming, sensors interfacing, PCB design, and Mechanical Cad design to and create rapid prototyping. The author presents the methodologies of rapid prototyping with KiCAD design and Catia software, used to create ready to mount solutions. The book covers scripting- based and drag/drop- based programming for different problems and data gathering approach.


Book Synopsis Role of Single Board Computers (SBCs) in rapid IoT Prototyping by : G. R. Kanagachidambaresan

Download or read book Role of Single Board Computers (SBCs) in rapid IoT Prototyping written by G. R. Kanagachidambaresan and published by Springer Nature. This book was released on 2021-05-28 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents how to program Single Board Computers (SBCs) for Internet of Things (IoT) rapid prototyping with popular tools such as Raspberry Pi, Arduino, Beagle Bone, and NXP boards. The book provides novel programs to solve new technological real-time problems. The author addresses programming, PCB design and Mechanical Cad design all in single volume, easing learners into incorporating their ideas as prototype. The aim of the book is to provide programming, sensors interfacing, PCB design, and Mechanical Cad design to and create rapid prototyping. The author presents the methodologies of rapid prototyping with KiCAD design and Catia software, used to create ready to mount solutions. The book covers scripting- based and drag/drop- based programming for different problems and data gathering approach.


Multifunctional Sensors

Multifunctional Sensors

Author: Bansari Deb Majumder

Publisher: CRC Press

Published: 2023-08-31

Total Pages: 111

ISBN-13: 1000929078

DOWNLOAD EBOOK

This book provides a detailed overview of multifunctional sensors, covering discussions on different types of multifunctional sensors developed in past years. As a case study, the development of admittance-type multifunctional sensors is provided, constituting its construction, working principles, measurements, and instrumentation used. It also explores a review of the research in the field from 1990 to 2022. It will be a useful resource for researchers of sensor technologies across physics, engineering, and other physical sciences. Key Features • Presents a case study of a multifunctional sensor that measures temperature and level simultaneously. • Discusses latest trends in the area and can be understood by advanced students up to research level scholars. • Looks ahead to the future of these sensors for further research opportunities.


Book Synopsis Multifunctional Sensors by : Bansari Deb Majumder

Download or read book Multifunctional Sensors written by Bansari Deb Majumder and published by CRC Press. This book was released on 2023-08-31 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a detailed overview of multifunctional sensors, covering discussions on different types of multifunctional sensors developed in past years. As a case study, the development of admittance-type multifunctional sensors is provided, constituting its construction, working principles, measurements, and instrumentation used. It also explores a review of the research in the field from 1990 to 2022. It will be a useful resource for researchers of sensor technologies across physics, engineering, and other physical sciences. Key Features • Presents a case study of a multifunctional sensor that measures temperature and level simultaneously. • Discusses latest trends in the area and can be understood by advanced students up to research level scholars. • Looks ahead to the future of these sensors for further research opportunities.


Hands-On Accelerator Physics Using MATLAB®

Hands-On Accelerator Physics Using MATLAB®

Author: Volker Ziemann

Publisher: CRC Press

Published: 2019-04-29

Total Pages: 358

ISBN-13: 0429957475

DOWNLOAD EBOOK

Awarded one of BookAuthority's best new Particle Physics books in 2019! Hands-On Accelerator Physics Using MATLAB® provides an introduction into the design and operational issues of a wide range of particle accelerators, from ion-implanters to the Large Hadron Collider at CERN. Many aspects from the design of beam optical systems and magnets, to the subsystems for acceleration, beam diagnostics, and vacuum are covered. Beam dynamics topics ranging from the beam-beam interaction to free-electron lasers are discussed. Theoretical concepts and the design of key components are explained with the help of MATLAB® code. Practical topics, such as beam size measurements, magnet construction and measurements, and radio-frequency measurements are explored in student labs without requiring access to an accelerator. This unique approach provides a look at what goes on 'under the hood' inside modern accelerators and presents readers with the tools to perform their independent investigations on the computer or in student labs. This book will be of interest to graduate students, postgraduate researchers studying accelerator physics, as well as engineers entering the field. Features: Provides insights into both synchrotron light sources and colliders Discusses technical subsystems, including magnets, radio-frequency engineering, instrumentation and diagnostics, correction of imperfections, control, and cryogenics Accompanied by MATLAB® code, including a 3D-modeler to visualize the accelerators, and additional appendices which are available on the CRC Press website


Book Synopsis Hands-On Accelerator Physics Using MATLAB® by : Volker Ziemann

Download or read book Hands-On Accelerator Physics Using MATLAB® written by Volker Ziemann and published by CRC Press. This book was released on 2019-04-29 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Awarded one of BookAuthority's best new Particle Physics books in 2019! Hands-On Accelerator Physics Using MATLAB® provides an introduction into the design and operational issues of a wide range of particle accelerators, from ion-implanters to the Large Hadron Collider at CERN. Many aspects from the design of beam optical systems and magnets, to the subsystems for acceleration, beam diagnostics, and vacuum are covered. Beam dynamics topics ranging from the beam-beam interaction to free-electron lasers are discussed. Theoretical concepts and the design of key components are explained with the help of MATLAB® code. Practical topics, such as beam size measurements, magnet construction and measurements, and radio-frequency measurements are explored in student labs without requiring access to an accelerator. This unique approach provides a look at what goes on 'under the hood' inside modern accelerators and presents readers with the tools to perform their independent investigations on the computer or in student labs. This book will be of interest to graduate students, postgraduate researchers studying accelerator physics, as well as engineers entering the field. Features: Provides insights into both synchrotron light sources and colliders Discusses technical subsystems, including magnets, radio-frequency engineering, instrumentation and diagnostics, correction of imperfections, control, and cryogenics Accompanied by MATLAB® code, including a 3D-modeler to visualize the accelerators, and additional appendices which are available on the CRC Press website


Multi-Component Force Sensing Systems

Multi-Component Force Sensing Systems

Author: Qiaokang Liang

Publisher: CRC Press

Published: 2021-02-28

Total Pages: 89

ISBN-13: 1000358577

DOWNLOAD EBOOK

Multi-Component Force Sensing Systems focuses on the design, development, decoupling, and applications of multi-component force sensing systems. Force and moment information can be used as feedback to form an automatic control system to accomplish efficient manipulation. The origins of force measurement and control can be traced back to the late 1970s. Since then, multi-component F/M (force/moment) sensing systems have been widely known and intensively studied. In the past few years, force measurement practices have been significantly affected by new tools (such as digital force gauges, virtual instrumentation, high speed data acquisition systems, etc.) as well as sophisticated measurement methods such as mechano-magnetic, mechano-optical, etc. However, this is the first book to provide an overview of the topic. It will be a useful reference for students in physics and engineering working with robotic sensing systems and robotic systems, in addition to researchers and those working within industry. This work was supported in part by the National Nature Science Foundation of China (NSFC 62073129 and 61673163). Features: • Explores the development of force/torque sensing systems • Provides real applications of the multi-component force/torque sensing systems • Contains executable code for decoupling algorithms About the Author: Qiaokang Liang is an Associate Professor with the College of Electrical and Information Engineering, Hunan University. He is currently the vice director of the Hunan Key Laboratory of Intelligent Robot Technology in Electronic Manufacturing and serving as the assistant director of the National Engineering Laboratory for Robot Vision Perception and Control. He received his Ph.D. degree in control science and engineering from the University of Science and Technology of China, Hefei, China, in 2011. His research interests include robotics and mechatronics, biomimetic sensing, advanced robot technology, and human–computer interaction.


Book Synopsis Multi-Component Force Sensing Systems by : Qiaokang Liang

Download or read book Multi-Component Force Sensing Systems written by Qiaokang Liang and published by CRC Press. This book was released on 2021-02-28 with total page 89 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multi-Component Force Sensing Systems focuses on the design, development, decoupling, and applications of multi-component force sensing systems. Force and moment information can be used as feedback to form an automatic control system to accomplish efficient manipulation. The origins of force measurement and control can be traced back to the late 1970s. Since then, multi-component F/M (force/moment) sensing systems have been widely known and intensively studied. In the past few years, force measurement practices have been significantly affected by new tools (such as digital force gauges, virtual instrumentation, high speed data acquisition systems, etc.) as well as sophisticated measurement methods such as mechano-magnetic, mechano-optical, etc. However, this is the first book to provide an overview of the topic. It will be a useful reference for students in physics and engineering working with robotic sensing systems and robotic systems, in addition to researchers and those working within industry. This work was supported in part by the National Nature Science Foundation of China (NSFC 62073129 and 61673163). Features: • Explores the development of force/torque sensing systems • Provides real applications of the multi-component force/torque sensing systems • Contains executable code for decoupling algorithms About the Author: Qiaokang Liang is an Associate Professor with the College of Electrical and Information Engineering, Hunan University. He is currently the vice director of the Hunan Key Laboratory of Intelligent Robot Technology in Electronic Manufacturing and serving as the assistant director of the National Engineering Laboratory for Robot Vision Perception and Control. He received his Ph.D. degree in control science and engineering from the University of Science and Technology of China, Hefei, China, in 2011. His research interests include robotics and mechatronics, biomimetic sensing, advanced robot technology, and human–computer interaction.


Raspberry Pi Home Automation with Arduino

Raspberry Pi Home Automation with Arduino

Author: Andrew K. Dennis

Publisher: Packt Publishing

Published: 2013

Total Pages: 0

ISBN-13: 9781849695862

DOWNLOAD EBOOK

Raspberry Pi Home Automation with Arduino is an easy-to-follow yet comprehensive guide for automating your home using the revolutionary ARM GNU/Linux board.Even if you have no prior experience with the Raspberry Pi or home automation you can pick up this book and develop these amazing projects. Full of detailed step-by-step instructions, diagrams, and images this essential guide allows you to revolutionize the way you interact with your home. If you don't know where to start, then this is the perfect book for you


Book Synopsis Raspberry Pi Home Automation with Arduino by : Andrew K. Dennis

Download or read book Raspberry Pi Home Automation with Arduino written by Andrew K. Dennis and published by Packt Publishing. This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Raspberry Pi Home Automation with Arduino is an easy-to-follow yet comprehensive guide for automating your home using the revolutionary ARM GNU/Linux board.Even if you have no prior experience with the Raspberry Pi or home automation you can pick up this book and develop these amazing projects. Full of detailed step-by-step instructions, diagrams, and images this essential guide allows you to revolutionize the way you interact with your home. If you don't know where to start, then this is the perfect book for you


Nanosensors

Nanosensors

Author: Vinod Kumar Khanna

Publisher: CRC Press

Published: 2021-02-25

Total Pages: 579

ISBN-13: 100033127X

DOWNLOAD EBOOK

Nanosensors are innovative devices that exploit the unique properties exhibited by matter at the nanoscale. A growing and exciting field, nanosensors have recently spurred considerable research endeavors across the globe, driving a need for the development of new device concepts and engineering nanostructured materials with controlled properties. Nanosensors: Physical, Chemical, and Biological, Second Edition offers a panoramic view of the field and related nanotechnologies with extraordinary clarity and depth. Presenting an interdisciplinary approach, blending physics, chemistry and biology, this new edition is broad in scope and organised into six parts; beginning with the fundamentals before moving onto nanomaterials and nanofabrication technologies in the second part. The third and fourth parts provide a critical appraisal of physical nanosensors, and explore the chemical and biological categories of nanosensors. The fifth part sheds light on the emerging applications of nanosensors in the sectors of society, industry, and defense and details the cutting-edge applications of state-of-the-art nanosensors in environmental science, food technology, medical diagnostics, and biotechnology. The final part addresses self-powering and networking issues of nanosensors, and provides glimpses of future trends. This is an ideal reference for researchers and industry professionals engaged in the frontier areas of material science and semiconductor fabrication as well as graduate students in physics and engineering pursuing electrical engineering and electronics courses with a focus on nanoscience and nanotechnology. Key features: Provides an updated, all-encompassing exploration of contemporary nanosensors and highlights the exclusive nanoscale properties on which nanosensors are designed. Presents an accessible approach with a question-and-answer format to allow an easy grasp of the intricacies involved in the complex working mechanisms of devices. Contains clear, illustrative diagrams enabling the visualization of nanosensor operations, along with worked examples, end of chapter questions, and exhaustive up-to-date bibliographies appended to each chapter.


Book Synopsis Nanosensors by : Vinod Kumar Khanna

Download or read book Nanosensors written by Vinod Kumar Khanna and published by CRC Press. This book was released on 2021-02-25 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanosensors are innovative devices that exploit the unique properties exhibited by matter at the nanoscale. A growing and exciting field, nanosensors have recently spurred considerable research endeavors across the globe, driving a need for the development of new device concepts and engineering nanostructured materials with controlled properties. Nanosensors: Physical, Chemical, and Biological, Second Edition offers a panoramic view of the field and related nanotechnologies with extraordinary clarity and depth. Presenting an interdisciplinary approach, blending physics, chemistry and biology, this new edition is broad in scope and organised into six parts; beginning with the fundamentals before moving onto nanomaterials and nanofabrication technologies in the second part. The third and fourth parts provide a critical appraisal of physical nanosensors, and explore the chemical and biological categories of nanosensors. The fifth part sheds light on the emerging applications of nanosensors in the sectors of society, industry, and defense and details the cutting-edge applications of state-of-the-art nanosensors in environmental science, food technology, medical diagnostics, and biotechnology. The final part addresses self-powering and networking issues of nanosensors, and provides glimpses of future trends. This is an ideal reference for researchers and industry professionals engaged in the frontier areas of material science and semiconductor fabrication as well as graduate students in physics and engineering pursuing electrical engineering and electronics courses with a focus on nanoscience and nanotechnology. Key features: Provides an updated, all-encompassing exploration of contemporary nanosensors and highlights the exclusive nanoscale properties on which nanosensors are designed. Presents an accessible approach with a question-and-answer format to allow an easy grasp of the intricacies involved in the complex working mechanisms of devices. Contains clear, illustrative diagrams enabling the visualization of nanosensor operations, along with worked examples, end of chapter questions, and exhaustive up-to-date bibliographies appended to each chapter.


Atmospheric Monitoring with Arduino

Atmospheric Monitoring with Arduino

Author: Patrick Di Justo

Publisher: "O'Reilly Media, Inc."

Published: 2012-11-20

Total Pages: 90

ISBN-13: 1449338100

DOWNLOAD EBOOK

Makers around the globe are building low-cost devices to monitor the environment, and with this hands-on guide, so can you. Through succinct tutorials, illustrations, and clear step-by-step instructions, you’ll learn how to create gadgets for examining the quality of our atmosphere, using Arduino and several inexpensive sensors. Detect harmful gases, dust particles such as smoke and smog, and upper atmospheric haze—substances and conditions that are often invisible to your senses. You’ll also discover how to use the scientific method to help you learn even more from your atmospheric tests. Get up to speed on Arduino with a quick electronics primer Build a tropospheric gas sensor to detect carbon monoxide, LPG, butane, methane, benzene, and many other gases Create an LED Photometer to measure how much of the sun’s blue, green, and red light waves are penetrating the atmosphere Build an LED sensitivity detector—and discover which light wavelengths each LED in your Photometer is receptive to Learn how measuring light wavelengths lets you determine the amount of water vapor, ozone, and other substances in the atmosphere Upload your data to Cosm and share it with others via the Internet "The future will rely on citizen scientists collecting and analyzing their own data. The easy and fun gadgets in this book show everyone from Arduino beginners to experienced Makers how best to do that." --Chris Anderson, Editor in Chief of Wired magazine, author of Makers: The New Industrial Revolution (Crown Business)


Book Synopsis Atmospheric Monitoring with Arduino by : Patrick Di Justo

Download or read book Atmospheric Monitoring with Arduino written by Patrick Di Justo and published by "O'Reilly Media, Inc.". This book was released on 2012-11-20 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: Makers around the globe are building low-cost devices to monitor the environment, and with this hands-on guide, so can you. Through succinct tutorials, illustrations, and clear step-by-step instructions, you’ll learn how to create gadgets for examining the quality of our atmosphere, using Arduino and several inexpensive sensors. Detect harmful gases, dust particles such as smoke and smog, and upper atmospheric haze—substances and conditions that are often invisible to your senses. You’ll also discover how to use the scientific method to help you learn even more from your atmospheric tests. Get up to speed on Arduino with a quick electronics primer Build a tropospheric gas sensor to detect carbon monoxide, LPG, butane, methane, benzene, and many other gases Create an LED Photometer to measure how much of the sun’s blue, green, and red light waves are penetrating the atmosphere Build an LED sensitivity detector—and discover which light wavelengths each LED in your Photometer is receptive to Learn how measuring light wavelengths lets you determine the amount of water vapor, ozone, and other substances in the atmosphere Upload your data to Cosm and share it with others via the Internet "The future will rely on citizen scientists collecting and analyzing their own data. The easy and fun gadgets in this book show everyone from Arduino beginners to experienced Makers how best to do that." --Chris Anderson, Editor in Chief of Wired magazine, author of Makers: The New Industrial Revolution (Crown Business)