Download Adhesion And Bonding To Polyolefins full books in PDF, epub, and Kindle. Read online Adhesion And Bonding To Polyolefins ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Polyolefins have many and varied applications. However, they have very poor bonding properties. This review discusses ways of improving adhesion and bonding. It describes the theories surrounding adhesion of polyolefins and the analysis techniques which have been used to characterise the material surfaces. Methods of enhancing adhesion are then discussed. An additional indexed section containing several hundred abstracts from the Polymer Library gives useful references for further reading.
Book Synopsis Adhesion and Bonding to Polyolefins by : D. M. Brewis
Download or read book Adhesion and Bonding to Polyolefins written by D. M. Brewis and published by iSmithers Rapra Publishing. This book was released on 2002 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polyolefins have many and varied applications. However, they have very poor bonding properties. This review discusses ways of improving adhesion and bonding. It describes the theories surrounding adhesion of polyolefins and the analysis techniques which have been used to characterise the material surfaces. Methods of enhancing adhesion are then discussed. An additional indexed section containing several hundred abstracts from the Polymer Library gives useful references for further reading.
The use of adhesives continues to increase both in importance and in areas of use, particularly in engineering construction. Alongside this is a steady growth in our fundamental understanding of the factors involved. Both of these topics are reflected in various meetings and nowhere more consistently than at the Annual Conference on Adhesion and Adhesives at The City University each Easter. 1984 was the twenty-second of these when, once again, people carne from far and near to present accounts of their work and to discuss them in all their variety. This publication makes the papers available to the wider audience who were not able to attend in person. In presenting this volume, may I express sincere gratitude, both personally and on behalf of the University, to all those who contributed in so many and various ways to the conference. K. W. ALLEN Contents Preface. v l. Textile-to-Rubber Adhesion: Theory and Practice David B. Wootton (Milliken Industrials Ltd, Wellington Mill, Wellington Street, Bury, Lancashire BL8 2AY, UK) 2. Aspects of Adhesion Promotion with Flexible Coated Fabrics 13 J. R. Holker and A. J. G. Sagar (Shirley Institute, Didsbury, Manchester M20 8RX, UK) 3. The Adhesion of Some Ethylene-Vinyl Acetate Copolymers Applied as Hot Melt Coatings to Metals 33 T. A. Hatzinikolaou and D. E. Packham (School of Materials Science, University of Bath, Claverton Down, Bath BA2 7 A Y, UK) 4. Formation of Indium Bonds for Ultrasonic Systems and Examination of Metal Diffusion Bonds by Scanning Acoustic Microscopy .
Book Synopsis Adhesion 9 by : K.W. Allen
Download or read book Adhesion 9 written by K.W. Allen and published by Springer Science & Business Media. This book was released on 1985-01-31 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of adhesives continues to increase both in importance and in areas of use, particularly in engineering construction. Alongside this is a steady growth in our fundamental understanding of the factors involved. Both of these topics are reflected in various meetings and nowhere more consistently than at the Annual Conference on Adhesion and Adhesives at The City University each Easter. 1984 was the twenty-second of these when, once again, people carne from far and near to present accounts of their work and to discuss them in all their variety. This publication makes the papers available to the wider audience who were not able to attend in person. In presenting this volume, may I express sincere gratitude, both personally and on behalf of the University, to all those who contributed in so many and various ways to the conference. K. W. ALLEN Contents Preface. v l. Textile-to-Rubber Adhesion: Theory and Practice David B. Wootton (Milliken Industrials Ltd, Wellington Mill, Wellington Street, Bury, Lancashire BL8 2AY, UK) 2. Aspects of Adhesion Promotion with Flexible Coated Fabrics 13 J. R. Holker and A. J. G. Sagar (Shirley Institute, Didsbury, Manchester M20 8RX, UK) 3. The Adhesion of Some Ethylene-Vinyl Acetate Copolymers Applied as Hot Melt Coatings to Metals 33 T. A. Hatzinikolaou and D. E. Packham (School of Materials Science, University of Bath, Claverton Down, Bath BA2 7 A Y, UK) 4. Formation of Indium Bonds for Ultrasonic Systems and Examination of Metal Diffusion Bonds by Scanning Acoustic Microscopy .
Book Synopsis Electrical Discharge Treatment of Polyolefin Surfaces for Improved Adhesive Bonding by : John Madison Questel
Download or read book Electrical Discharge Treatment of Polyolefin Surfaces for Improved Adhesive Bonding written by John Madison Questel and published by . This book was released on 1993 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt:
A handbook on polyolefins. This second edition includes new material on the structure, morphology and properties of polyolefin (PO) synthesis. It focuses on synthetic advances, the use of additives, special coverage of PO blends, composites and fibres, and surface treatments. It also addresses the problem of interfacial and superficial phenomena.
Book Synopsis Handbook of Polyolefins by : Cornelia Vasile
Download or read book Handbook of Polyolefins written by Cornelia Vasile and published by CRC Press. This book was released on 2000-06-21 with total page 1040 pages. Available in PDF, EPUB and Kindle. Book excerpt: A handbook on polyolefins. This second edition includes new material on the structure, morphology and properties of polyolefin (PO) synthesis. It focuses on synthetic advances, the use of additives, special coverage of PO blends, composites and fibres, and surface treatments. It also addresses the problem of interfacial and superficial phenomena.
An indispensable volume detailing the current and potential applications of atmospheric pressure plasma treatment by experts practicing in fields around the world Polymers are used in a wide variety of industries to fabricate legions of products because of their many desirable traits. However, polymers in general (and polyolefins, in particular) are innately not very adhesionable because of the absence of polar or reactive groups on their surfaces and concomitant low surface energy. Surface treatment of polymers, however, is essential to impart reactive chemical groups on their surfaces to enhance their adhesion characteristic. Proper surface treatment can endow polymers with improved adhesion without affecting the bulk properties. A plethora of techniques (ranging from wet to dry, simple to sophisticated, vacuum to non-vacuum) for polymer surface modification have been documented in the literature but the Atmospheric Pressure Plasma (APP) treatment has attracted much attention because it offers many advantages vis-a-vis other techniques, namely uniform treatment, continuous operation, no need for vacuum, simplicity, low cost, no environmental or disposal concern, and applicability to large area samples. Although the emphasis in this book is on the utility of APP treatment for enhancement of polymer adhesion, APP is also applicable and effective to modulate many other surface properties of polymers: superhydrophilicity, superhydrophobicity, anti-fouling, anti-fogging, anti-icing, cell adhesion, biocompatibility, tribological behavior, etc. The key features of Atmospheric Pressure Plasma Treatment of Polymers: Address design and functions of various types of reactors Bring out current and potential applications of APP treatment Represent the cumulative wisdom of many key academic and industry researchers actively engaged in this key and enabling technology
Book Synopsis Atmospheric Pressure Plasma Treatment of Polymers by : Michael Thomas
Download or read book Atmospheric Pressure Plasma Treatment of Polymers written by Michael Thomas and published by John Wiley & Sons. This book was released on 2013-06-19 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: An indispensable volume detailing the current and potential applications of atmospheric pressure plasma treatment by experts practicing in fields around the world Polymers are used in a wide variety of industries to fabricate legions of products because of their many desirable traits. However, polymers in general (and polyolefins, in particular) are innately not very adhesionable because of the absence of polar or reactive groups on their surfaces and concomitant low surface energy. Surface treatment of polymers, however, is essential to impart reactive chemical groups on their surfaces to enhance their adhesion characteristic. Proper surface treatment can endow polymers with improved adhesion without affecting the bulk properties. A plethora of techniques (ranging from wet to dry, simple to sophisticated, vacuum to non-vacuum) for polymer surface modification have been documented in the literature but the Atmospheric Pressure Plasma (APP) treatment has attracted much attention because it offers many advantages vis-a-vis other techniques, namely uniform treatment, continuous operation, no need for vacuum, simplicity, low cost, no environmental or disposal concern, and applicability to large area samples. Although the emphasis in this book is on the utility of APP treatment for enhancement of polymer adhesion, APP is also applicable and effective to modulate many other surface properties of polymers: superhydrophilicity, superhydrophobicity, anti-fouling, anti-fogging, anti-icing, cell adhesion, biocompatibility, tribological behavior, etc. The key features of Atmospheric Pressure Plasma Treatment of Polymers: Address design and functions of various types of reactors Bring out current and potential applications of APP treatment Represent the cumulative wisdom of many key academic and industry researchers actively engaged in this key and enabling technology
Book Synopsis Adhesion to Fluoropolymers by : Derek Brewis
Download or read book Adhesion to Fluoropolymers written by Derek Brewis and published by iSmithers Rapra Publishing. This book was released on 2006 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt:
The use of adhesives is widespread and growing, and there are few modern artefacts, from the simple cereal packet, to the jumbo jet, that are without this means of joining. Adhesion Science provides an illuminating account of the science underlying the use of adhesives, a branch of chemical technology which is fundamental to the science of coatings and composite materials and to the performance of all types of bonded structures. This book guides the reader through the essential basic polymer science, and the chemistry of adhesives in use at present. It discusses surface preparation for adhesive bonding, and the use of primers and coupling agents. There is a detailed chapter on contact angles and what can be predicted from them. A simple guide on stress distribution joints and how this relates to testing is included. It also examines the interaction of adhesives and the environment, including an analysis of the resistance of joints to water, oxygen and ultra-violet light. Adhesion Science provides a comprehensive introduction to the chemistry of adhesives, and will be of interest not only to chemists, but also to readers with a background in physical or materials science.
Book Synopsis Adhesion Science by : John Comyn
Download or read book Adhesion Science written by John Comyn and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of adhesives is widespread and growing, and there are few modern artefacts, from the simple cereal packet, to the jumbo jet, that are without this means of joining. Adhesion Science provides an illuminating account of the science underlying the use of adhesives, a branch of chemical technology which is fundamental to the science of coatings and composite materials and to the performance of all types of bonded structures. This book guides the reader through the essential basic polymer science, and the chemistry of adhesives in use at present. It discusses surface preparation for adhesive bonding, and the use of primers and coupling agents. There is a detailed chapter on contact angles and what can be predicted from them. A simple guide on stress distribution joints and how this relates to testing is included. It also examines the interaction of adhesives and the environment, including an analysis of the resistance of joints to water, oxygen and ultra-violet light. Adhesion Science provides a comprehensive introduction to the chemistry of adhesives, and will be of interest not only to chemists, but also to readers with a background in physical or materials science.
This is a unique compilation of surface preparation principles and techniques for plastics, thermosets, elastomers, and metals bonding. With emphasis on the practical, it draws together in a single source technical principles of surface science and surface treatments technologies of plastics, elastomers, and metals. It is both a reference and a guide for engineers, scientists, practitioners of surface treatment, researchers, students, and others involved in materials adhesion and processing.This book describes and illustrates the surface preparations and operations that must be applied to a surface before acceptable adhesive bonding is achieved. It is meant to be a comprehensive overview, including more detailed explanation where necessary, in a continuous and logical progression. This book is intended to be a handbook for reference of surface treating processes. The more technical chapters can be bypassed to study the applied chapters. The text is accessible to readers with a college-level background in mathematics and chemistry, but an in-depth knowledge of adhesion technology is not required.
Book Synopsis Surface Treatment of Materials for Adhesion Bonding by : Sina Ebnesajjad
Download or read book Surface Treatment of Materials for Adhesion Bonding written by Sina Ebnesajjad and published by William Andrew. This book was released on 2006-06-12 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a unique compilation of surface preparation principles and techniques for plastics, thermosets, elastomers, and metals bonding. With emphasis on the practical, it draws together in a single source technical principles of surface science and surface treatments technologies of plastics, elastomers, and metals. It is both a reference and a guide for engineers, scientists, practitioners of surface treatment, researchers, students, and others involved in materials adhesion and processing.This book describes and illustrates the surface preparations and operations that must be applied to a surface before acceptable adhesive bonding is achieved. It is meant to be a comprehensive overview, including more detailed explanation where necessary, in a continuous and logical progression. This book is intended to be a handbook for reference of surface treating processes. The more technical chapters can be bypassed to study the applied chapters. The text is accessible to readers with a college-level background in mathematics and chemistry, but an in-depth knowledge of adhesion technology is not required.
This review discusses the types of engineering adhesives in use, properties, advantages and disadvantages, and applications. It is very clearly written, well referenced and provides an excellent overview of a rapidly developing field. The author is an expert with many years of experience in adhesive research and development. The review is accompanied by around 400 abstracts from papers and books in the Polymer Library, to facilitate further reading on this subject.
Book Synopsis Engineering and Structural Adhesives by : D. J. Dunn
Download or read book Engineering and Structural Adhesives written by D. J. Dunn and published by iSmithers Rapra Publishing. This book was released on 2004 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This review discusses the types of engineering adhesives in use, properties, advantages and disadvantages, and applications. It is very clearly written, well referenced and provides an excellent overview of a rapidly developing field. The author is an expert with many years of experience in adhesive research and development. The review is accompanied by around 400 abstracts from papers and books in the Polymer Library, to facilitate further reading on this subject.
This book is based on the 13 review articles written by subject experts and published in 2014 in the Journal Reviews of Adhesion and Adhesives. The rationale for publication of this book is that currently the RAA has limited circulation, so this book provides broad exposure and dissemination of the concise, critical, illuminating, and thought-provoking review articles. The subjects of the reviews fall into 4 general areas: 1. Polymer surface modification 2. Biomedical, pharmaceutical and dental fields 3. Adhesives and adhesive joints 4. General Adhesion Aspects The topics covered include: Adhesion of condensed bodies at microscale; imparting adhesion property to silicone material; functionally graded adhesively bonded joints; synthetic adhesives for wood panels; adhesion theories in wood adhesive bonding; adhesion and surface issues in biocomposites and bionanocomposites; adhesion phenomena in pharmaceutical products and applications of AFM; cyanoacrylate adhesives in surgical applications; ways to generate monosort functionalized polyolefin surfaces; nano-enhanced adhesives; bonding dissimilar materials in dentistry; flame treatment of polymeric materials—relevance to adhesion; and mucoadhesive polymers for enhancing retention of ocular drug delivery.
Book Synopsis Progress in Adhesion and Adhesives by : K. L. Mittal
Download or read book Progress in Adhesion and Adhesives written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2015-07-27 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on the 13 review articles written by subject experts and published in 2014 in the Journal Reviews of Adhesion and Adhesives. The rationale for publication of this book is that currently the RAA has limited circulation, so this book provides broad exposure and dissemination of the concise, critical, illuminating, and thought-provoking review articles. The subjects of the reviews fall into 4 general areas: 1. Polymer surface modification 2. Biomedical, pharmaceutical and dental fields 3. Adhesives and adhesive joints 4. General Adhesion Aspects The topics covered include: Adhesion of condensed bodies at microscale; imparting adhesion property to silicone material; functionally graded adhesively bonded joints; synthetic adhesives for wood panels; adhesion theories in wood adhesive bonding; adhesion and surface issues in biocomposites and bionanocomposites; adhesion phenomena in pharmaceutical products and applications of AFM; cyanoacrylate adhesives in surgical applications; ways to generate monosort functionalized polyolefin surfaces; nano-enhanced adhesives; bonding dissimilar materials in dentistry; flame treatment of polymeric materials—relevance to adhesion; and mucoadhesive polymers for enhancing retention of ocular drug delivery.
