Download Changeable And Reconfigurable Manufacturing Systems full books in PDF, epub, and Kindle. Read online Changeable And Reconfigurable Manufacturing Systems ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
“Changeable and Reconfigurable Manufacturing Systems” discusses key strategies for success in the changing manufacturing environment. Changes can often be anticipated but some go beyond the design range, requiring innovative change enablers and adaptation mechanisms. The book presents the new concept of Changeability as an umbrella framework that encompasses paradigms such as agility, adaptability, flexibility and reconfigurability. It provides the definitions and classification of key terms in this new field, and emphasizes the required physical/hard and logical/soft change enablers. The book presents cutting edge technologies and the latest research, as well as future directions to help manufacturers stay competitive. It contains original contributions and results from senior international experts, together with industrial applications. The book serves as a comprehensive reference for professional engineers, managers, and academics in manufacturing, industrial and mechanical engineering.
Book Synopsis Changeable and Reconfigurable Manufacturing Systems by : Hoda A. ElMaraghy
Download or read book Changeable and Reconfigurable Manufacturing Systems written by Hoda A. ElMaraghy and published by Springer Science & Business Media. This book was released on 2008-11-23 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Changeable and Reconfigurable Manufacturing Systems” discusses key strategies for success in the changing manufacturing environment. Changes can often be anticipated but some go beyond the design range, requiring innovative change enablers and adaptation mechanisms. The book presents the new concept of Changeability as an umbrella framework that encompasses paradigms such as agility, adaptability, flexibility and reconfigurability. It provides the definitions and classification of key terms in this new field, and emphasizes the required physical/hard and logical/soft change enablers. The book presents cutting edge technologies and the latest research, as well as future directions to help manufacturers stay competitive. It contains original contributions and results from senior international experts, together with industrial applications. The book serves as a comprehensive reference for professional engineers, managers, and academics in manufacturing, industrial and mechanical engineering.
“Changeable and Reconfigurable Manufacturing Systems” discusses key strategies for success in the changing manufacturing environment. Changes can often be anticipated but some go beyond the design range, requiring innovative change enablers and adaptation mechanisms. The book presents the new concept of Changeability as an umbrella framework that encompasses paradigms such as agility, adaptability, flexibility and reconfigurability. It provides the definitions and classification of key terms in this new field, and emphasizes the required physical/hard and logical/soft change enablers. The book presents cutting edge technologies and the latest research, as well as future directions to help manufacturers stay competitive. It contains original contributions and results from senior international experts, together with industrial applications. The book serves as a comprehensive reference for professional engineers, managers, and academics in manufacturing, industrial and mechanical engineering.
Book Synopsis Changeable and Reconfigurable Manufacturing Systems by : Hoda ElMaraghy
Download or read book Changeable and Reconfigurable Manufacturing Systems written by Hoda ElMaraghy and published by Springer. This book was released on 2008-12-09 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Changeable and Reconfigurable Manufacturing Systems” discusses key strategies for success in the changing manufacturing environment. Changes can often be anticipated but some go beyond the design range, requiring innovative change enablers and adaptation mechanisms. The book presents the new concept of Changeability as an umbrella framework that encompasses paradigms such as agility, adaptability, flexibility and reconfigurability. It provides the definitions and classification of key terms in this new field, and emphasizes the required physical/hard and logical/soft change enablers. The book presents cutting edge technologies and the latest research, as well as future directions to help manufacturers stay competitive. It contains original contributions and results from senior international experts, together with industrial applications. The book serves as a comprehensive reference for professional engineers, managers, and academics in manufacturing, industrial and mechanical engineering.
The first Digital Enterprise Technology (DET) International Conference was held in Durham, UK in 2002 and the second DET Conference in Seattle, USA in 2004. Sponsored by CIRP (College International pour la Recherche en Productique), the third DET Conference took place in Setúbal, Portugal in 2006. Digital Enterprise Technology: Perspectives and Future Challenges is an edited volume based on this conference. Topics include: distributed and collaborative design, process modeling and process planning, advanced factory equipment and layout design and modeling, physical-to-digital environment integrators, enterprise integration technologies, and entrepreneurship in DET.
Book Synopsis Digital Enterprise Technology by : Pedro Filipe Cunha
Download or read book Digital Enterprise Technology written by Pedro Filipe Cunha and published by Springer Science & Business Media. This book was released on 2007-09-18 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first Digital Enterprise Technology (DET) International Conference was held in Durham, UK in 2002 and the second DET Conference in Seattle, USA in 2004. Sponsored by CIRP (College International pour la Recherche en Productique), the third DET Conference took place in Setúbal, Portugal in 2006. Digital Enterprise Technology: Perspectives and Future Challenges is an edited volume based on this conference. Topics include: distributed and collaborative design, process modeling and process planning, advanced factory equipment and layout design and modeling, physical-to-digital environment integrators, enterprise integration technologies, and entrepreneurship in DET.
This book features state-of-the-art contributions from two well-established conferences: Changeable, Agile, Reconfigurable and Virtual Production Conference (CARV2020) and Mass Customization and Personalization Conference (MCPC2020). Together, they focus on the joint design, development, and management of products, production systems, and business for sustainable customization and personalization. The book covers a large range of topics within this domain, ranging from industrial success factors to original contributions within the field.
Book Synopsis Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems by : Ann-Louise Andersen
Download or read book Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems written by Ann-Louise Andersen and published by Springer Nature. This book was released on 2021-10-31 with total page 1054 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features state-of-the-art contributions from two well-established conferences: Changeable, Agile, Reconfigurable and Virtual Production Conference (CARV2020) and Mass Customization and Personalization Conference (MCPC2020). Together, they focus on the joint design, development, and management of products, production systems, and business for sustainable customization and personalization. The book covers a large range of topics within this domain, ranging from industrial success factors to original contributions within the field.
The CIRP Encyclopedia covers the state-of-art of advanced technologies, methods and models for production, production engineering and logistics. While the technological and operational aspects are in the focus, economical aspects are addressed too. The entries for a wide variety of terms were reviewed by the CIRP-Community, representing the highest standards in research. Thus, the content is not only evaluated internationally on a high scientific level but also reflects very recent developments.
Book Synopsis CIRP Encyclopedia of Production Engineering by : The International Academy for Produ
Download or read book CIRP Encyclopedia of Production Engineering written by The International Academy for Produ and published by Springer. This book was released on 2014-04-08 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The CIRP Encyclopedia covers the state-of-art of advanced technologies, methods and models for production, production engineering and logistics. While the technological and operational aspects are in the focus, economical aspects are addressed too. The entries for a wide variety of terms were reviewed by the CIRP-Community, representing the highest standards in research. Thus, the content is not only evaluated internationally on a high scientific level but also reflects very recent developments.
The changing manufacturing environment requires more responsive and adaptable manufacturing systems. The theme of the 4th International Conference on Changeable, Agile, Reconfigurable and Virtual production (CARV2011) is “Enabling Manufacturing Competitiveness and Economic Sustainability”. Leading edge research and best implementation practices and experiences, which address these important issues and challenges, are presented. The proceedings include advances in manufacturing systems design, planning, evaluation, control and evolving paradigms such as mass customization, personalization, changeability, re-configurability and flexibility. New and important concepts such as the dynamic product families and platforms, co-evolution of products and systems, and methods for enhancing manufacturing systems’ economic sustainability and prolonging their life to produce more than one product generation are treated. Enablers of change in manufacturing systems, production volume and capability scalability and managing the volatility of markets, competition among global enterprises and the increasing complexity of products, manufacturing systems and management strategies are discussed. Industry challenges and future directions for research and development needed to help both practitioners and academicians are presented.
Book Synopsis Enabling Manufacturing Competitiveness and Economic Sustainability by : Hoda A. ElMaraghy
Download or read book Enabling Manufacturing Competitiveness and Economic Sustainability written by Hoda A. ElMaraghy and published by Springer Science & Business Media. This book was released on 2011-09-29 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: The changing manufacturing environment requires more responsive and adaptable manufacturing systems. The theme of the 4th International Conference on Changeable, Agile, Reconfigurable and Virtual production (CARV2011) is “Enabling Manufacturing Competitiveness and Economic Sustainability”. Leading edge research and best implementation practices and experiences, which address these important issues and challenges, are presented. The proceedings include advances in manufacturing systems design, planning, evaluation, control and evolving paradigms such as mass customization, personalization, changeability, re-configurability and flexibility. New and important concepts such as the dynamic product families and platforms, co-evolution of products and systems, and methods for enhancing manufacturing systems’ economic sustainability and prolonging their life to produce more than one product generation are treated. Enablers of change in manufacturing systems, production volume and capability scalability and managing the volatility of markets, competition among global enterprises and the increasing complexity of products, manufacturing systems and management strategies are discussed. Industry challenges and future directions for research and development needed to help both practitioners and academicians are presented.
In the last decade, the production of mechanical components to be assembled in final products produced in high volumes (e.g. cars, mopeds, industrial vehicles, etc.) has undergone deep changes due to the overall modifications in the way companies compete. Companies must consider competitive factors such as short lead times, tight product tolerances, frequent market changes and cost reduction. Anyway, companies often have to define production objectives as trade-offs among these critical factors since it can be difficult to improve all of them. Even if system flexibility is often considered a fundamental requirement for firms, it is not always a desirable characteristic of a system because it requires relevant investment cost which can jeopardize the profitability of the firm. Dedicated systems are not able to adapt to changes of the product characteristics while flexible systems offer more flexibility than what is needed, thus increasing investment and operative costs. Production contexts characterized by mid to high demand volume of well identified families of products in continuous evolution do not require the highest level of flexibility; therefore, manufacturing system flexibility must be rationalized and it is necessary to find out the best trade-off between productivity and flexibility by designing manufacturing systems endowed with the right level of flexibility required by the production problem. This new class of production systems can be named Focused Flexibility Manufacturing Systems-FFMSs. The flexibility degree in FFMSs is related to their ability to cope with volume, mix and technological changes, and it must take into account both present and future changes. The required level of system flexibility impacts on the architecture of the system and the explicit design of flexibility often leads to hybrid systems, i.e. automated integrated systems in which parts can be processed by both general purpose and dedicated machines. This is a key issue of FFMSs and results from the matching of flexibility and productivity that respectively characterize FMSs and Dedicated Manufacturing Systems (DMSs). The market share of the EU in the machine tool sector is 44%; the introduction of focused flexibility would be particularly important for machine tool builders whose competitive advantage is based on the ability of customizing their systems on the basis of needs of their customers. In fact, even if current production contexts frequently present situations which would fit well with the FFMS approach, tradition and know-how of machine tool builders play a crucial role. Firms often agree with the focused flexibility vision, nevertheless they decide not to pay the risk and efforts related to the design of this new system architecture. This is due also to the lack of well-structured design approaches which can help machine tool builders to configure innovative systems. Therefore, the FFMS topic is studied through the book chapters following a shared mission: "To define methodologies and tools to design production systems with a minimum level of flexibility needed to face, during their lifecycle, the product and process evolution both in the technological and demand aspects. The goal is to find out the optimal trade-off between flexibility and productivity". The book framework follows the architecture which has been developed to address the FFMS Design problem. This architecture is both broad and detailed, since it pays attention to all the relevant levels in a firm hierarchy which are involved in the system design. Moreover, the architecture is innovative because it models both the point of view of the machine tool builder and the point of view of the system user. The architecture starts analyzing Manufacturing Strategy issues and generating the possible demand scenario to be faced. Technological aspects play a key role while solving process plan problems for the products in the part family. Strategic and technological data becomes input when a machine tool builder performs system configuration. The resulting system configurations are possible solutions that a system user considers when planning its system capacity. All the steps of the architecture are deeply studied, developing methods and tools to address each subproblem. Particular attention is paid to the methodologies adopted to face the different subproblems: mathematical programming, stochastic programming, simulation techniques and inverse kinematics have been used. The whole architecture provides a general approach to implement the right degree of flexibility and it allows to study how different aspects and decisions taken in a firm impact on each other. The work presented in the book is innovative because it gives links among different research fields, such as Manufacturing Strategy, Process Plan, System Design, Capacity Planning and Performance Evaluation; moreover, it helps to formalize and rationalize a critical area such as manufacturing system flexibility. The addressed problem is relevant at an academic level but, also, at an industrial level. A great deal of industrial sectors need to address the problem of designing systems with the right degree of flexibility; for instance, automotive, white goods, electrical and electronic goods industries, etc. Attention to industrial issues is confirmed by empirical studies and real case analyses which are presented within the book chapters.
Book Synopsis Design of Flexible Production Systems by : Tullio Tolio
Download or read book Design of Flexible Production Systems written by Tullio Tolio and published by Springer Science & Business Media. This book was released on 2008-12-11 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last decade, the production of mechanical components to be assembled in final products produced in high volumes (e.g. cars, mopeds, industrial vehicles, etc.) has undergone deep changes due to the overall modifications in the way companies compete. Companies must consider competitive factors such as short lead times, tight product tolerances, frequent market changes and cost reduction. Anyway, companies often have to define production objectives as trade-offs among these critical factors since it can be difficult to improve all of them. Even if system flexibility is often considered a fundamental requirement for firms, it is not always a desirable characteristic of a system because it requires relevant investment cost which can jeopardize the profitability of the firm. Dedicated systems are not able to adapt to changes of the product characteristics while flexible systems offer more flexibility than what is needed, thus increasing investment and operative costs. Production contexts characterized by mid to high demand volume of well identified families of products in continuous evolution do not require the highest level of flexibility; therefore, manufacturing system flexibility must be rationalized and it is necessary to find out the best trade-off between productivity and flexibility by designing manufacturing systems endowed with the right level of flexibility required by the production problem. This new class of production systems can be named Focused Flexibility Manufacturing Systems-FFMSs. The flexibility degree in FFMSs is related to their ability to cope with volume, mix and technological changes, and it must take into account both present and future changes. The required level of system flexibility impacts on the architecture of the system and the explicit design of flexibility often leads to hybrid systems, i.e. automated integrated systems in which parts can be processed by both general purpose and dedicated machines. This is a key issue of FFMSs and results from the matching of flexibility and productivity that respectively characterize FMSs and Dedicated Manufacturing Systems (DMSs). The market share of the EU in the machine tool sector is 44%; the introduction of focused flexibility would be particularly important for machine tool builders whose competitive advantage is based on the ability of customizing their systems on the basis of needs of their customers. In fact, even if current production contexts frequently present situations which would fit well with the FFMS approach, tradition and know-how of machine tool builders play a crucial role. Firms often agree with the focused flexibility vision, nevertheless they decide not to pay the risk and efforts related to the design of this new system architecture. This is due also to the lack of well-structured design approaches which can help machine tool builders to configure innovative systems. Therefore, the FFMS topic is studied through the book chapters following a shared mission: "To define methodologies and tools to design production systems with a minimum level of flexibility needed to face, during their lifecycle, the product and process evolution both in the technological and demand aspects. The goal is to find out the optimal trade-off between flexibility and productivity". The book framework follows the architecture which has been developed to address the FFMS Design problem. This architecture is both broad and detailed, since it pays attention to all the relevant levels in a firm hierarchy which are involved in the system design. Moreover, the architecture is innovative because it models both the point of view of the machine tool builder and the point of view of the system user. The architecture starts analyzing Manufacturing Strategy issues and generating the possible demand scenario to be faced. Technological aspects play a key role while solving process plan problems for the products in the part family. Strategic and technological data becomes input when a machine tool builder performs system configuration. The resulting system configurations are possible solutions that a system user considers when planning its system capacity. All the steps of the architecture are deeply studied, developing methods and tools to address each subproblem. Particular attention is paid to the methodologies adopted to face the different subproblems: mathematical programming, stochastic programming, simulation techniques and inverse kinematics have been used. The whole architecture provides a general approach to implement the right degree of flexibility and it allows to study how different aspects and decisions taken in a firm impact on each other. The work presented in the book is innovative because it gives links among different research fields, such as Manufacturing Strategy, Process Plan, System Design, Capacity Planning and Performance Evaluation; moreover, it helps to formalize and rationalize a critical area such as manufacturing system flexibility. The addressed problem is relevant at an academic level but, also, at an industrial level. A great deal of industrial sectors need to address the problem of designing systems with the right degree of flexibility; for instance, automotive, white goods, electrical and electronic goods industries, etc. Attention to industrial issues is confirmed by empirical studies and real case analyses which are presented within the book chapters.
This proceedings volume presents the latest research from the worldwide mass customization, personalization and co-creation (MCPC) community bringing together new thoughts and results from various disciplines within the field. The chapters are based on papers from The MCPC 2015 Conference where the emphasis was placed on “managing complexity.” MCPC is now beginning to emerge in many industries as a profitable business model. But customization and personalization go far beyond the sheer individualization of products and become an extension of current business models and production styles. This book covers topics such as complexity management of knowledge-based systems in manufacturing design and production, sustainable mass customization, choice navigation, and product modeling. The chapters are contributed by a wide range of specialists, offering cutting-edge research, as well as insightful advances in industrial practice in key areas. The MCPC 2015 Conference had a strong focus on real life MCPC applications, and this proceedings volume reflects this. MCPC strategies aim to profit from the fact that people are different. Their objective is to turn customer heterogeneities into profit opportunities, hence addressing the current trend of long tail business models. Mass customization means to provide goods and services that best serve individual customers’ personal needs with near mass production efficiency. This book brings together the latest from MCPC thought leaders, entrepreneurs, technology developers, and researchers that use these strategies in practice.
Book Synopsis Managing Complexity by : Jocelyn Bellemare
Download or read book Managing Complexity written by Jocelyn Bellemare and published by Springer. This book was released on 2018-06-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume presents the latest research from the worldwide mass customization, personalization and co-creation (MCPC) community bringing together new thoughts and results from various disciplines within the field. The chapters are based on papers from The MCPC 2015 Conference where the emphasis was placed on “managing complexity.” MCPC is now beginning to emerge in many industries as a profitable business model. But customization and personalization go far beyond the sheer individualization of products and become an extension of current business models and production styles. This book covers topics such as complexity management of knowledge-based systems in manufacturing design and production, sustainable mass customization, choice navigation, and product modeling. The chapters are contributed by a wide range of specialists, offering cutting-edge research, as well as insightful advances in industrial practice in key areas. The MCPC 2015 Conference had a strong focus on real life MCPC applications, and this proceedings volume reflects this. MCPC strategies aim to profit from the fact that people are different. Their objective is to turn customer heterogeneities into profit opportunities, hence addressing the current trend of long tail business models. Mass customization means to provide goods and services that best serve individual customers’ personal needs with near mass production efficiency. This book brings together the latest from MCPC thought leaders, entrepreneurs, technology developers, and researchers that use these strategies in practice.
Knowledge-intensive product realization implies embedded intelligence; meaning that if both theoretical and practical knowledge and understanding of a subject is integrated into the design and production processes of products, this will significantly increase added value. This book presents papers accepted for the 9th Swedish Production Symposium (SPS2020), hosted by the School of Engineering, Jönköping University, Sweden, and held online on 7 & 8 October 2020 because of restrictions due to the Corona virus pandemic. The subtitle of the conference was Knowledge Intensive Product Realization in Co-Operation for Future Sustainable Competitiveness. The book contains the 57 papers accepted for presentation at the conference, and these are divided into nine sections which reflect the topics covered: resource efficient production; flexible production; virtual production development; humans in production systems; circular production systems and maintenance; integrated product and production development; advanced and optimized components, materials and manufacturing; digitalization for smart products and services; and responsive and efficient operations and supply chains. In addition, the book presents five special sessions from the symposium: development of changeable and reconfigurable production systems; smart production system design and development; supply chain relocation; management of manufacturing digitalization; and additive manufacturing in the production system. The book will be of interest to all those working in the field of knowledge-intensive product realization.
Book Synopsis SPS2020 by : K. Säfsten
Download or read book SPS2020 written by K. Säfsten and published by IOS Press. This book was released on 2020-12-24 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: Knowledge-intensive product realization implies embedded intelligence; meaning that if both theoretical and practical knowledge and understanding of a subject is integrated into the design and production processes of products, this will significantly increase added value. This book presents papers accepted for the 9th Swedish Production Symposium (SPS2020), hosted by the School of Engineering, Jönköping University, Sweden, and held online on 7 & 8 October 2020 because of restrictions due to the Corona virus pandemic. The subtitle of the conference was Knowledge Intensive Product Realization in Co-Operation for Future Sustainable Competitiveness. The book contains the 57 papers accepted for presentation at the conference, and these are divided into nine sections which reflect the topics covered: resource efficient production; flexible production; virtual production development; humans in production systems; circular production systems and maintenance; integrated product and production development; advanced and optimized components, materials and manufacturing; digitalization for smart products and services; and responsive and efficient operations and supply chains. In addition, the book presents five special sessions from the symposium: development of changeable and reconfigurable production systems; smart production system design and development; supply chain relocation; management of manufacturing digitalization; and additive manufacturing in the production system. The book will be of interest to all those working in the field of knowledge-intensive product realization.
The changing manufacturing environment requires more responsive and adaptable manufacturing systems. The theme of the 5th International Conference on Changeable, Agile, Reconfigurable and Virtual production (CARV2013) is "Enabling Manufacturing Competitiveness and Economic Sustainability. Leading edge research and best implementation practices and experiences, which address these important issues and challenges, are presented. The proceedings include advances in manufacturing systems design, planning, evaluation, control and evolving paradigms such as mass customization, personalization, changeability, re-configurability and flexibility. New and important concepts such as the dynamic product families and platforms, co-evolution of products and systems, and methods for enhancing manufacturing systems' economic sustainability and prolonging their life to produce more than one product generation are treated. Enablers of change in manufacturing systems, production volume and capability, scalability and managing the volatility of markets, competition among global enterprises and the increasing complexity of products, manufacturing systems and management strategies are discussed. Industry challenges and future directions for research and development needed to help both practitioners and academicians are presented. About the Editor Prof. Dr.-Ing. Michael F. Zaeh, born in 1963, has been and is Professor for and Manufacturing Technology since 2002 and, together with Prof. Dr.-Ing. Gunther Reinhart, Head of the Institute for Machine Tools and Industrial Management (iwb) at the Technische Universitaet Muenchen (TUM). After studying general mechanical engineering, he was doctoral candidate under Prof. Dr.-Ing. Joachim Milberg at TUM from 1990 until 1993 and received his doctorate in 1993. From 1994 to 1995, he was department leader under Prof. Dr.-Ing. Gunther Reinhart. From 1996 to 2002, he worked for a machine tool manufacturer in several positions, most recently as a member of the extended management. Prof. Dr.-Ing. Michael F. Zaeh is an associated member of the CIRP and member of acatech, WGP and WLP. His current researches include among others Joining and Cutting Technologies like Laser Cutting and Welding as well as Friction Stir Welding, Structural Behaviour and Energy Efficiency of Machine Tools and Manufacturing Processes like Additive Manufacturing.
Book Synopsis Enabling Manufacturing Competitiveness and Economic Sustainability by : Michael F. Zaeh
Download or read book Enabling Manufacturing Competitiveness and Economic Sustainability written by Michael F. Zaeh and published by Springer Science & Business Media. This book was released on 2013-09-12 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The changing manufacturing environment requires more responsive and adaptable manufacturing systems. The theme of the 5th International Conference on Changeable, Agile, Reconfigurable and Virtual production (CARV2013) is "Enabling Manufacturing Competitiveness and Economic Sustainability. Leading edge research and best implementation practices and experiences, which address these important issues and challenges, are presented. The proceedings include advances in manufacturing systems design, planning, evaluation, control and evolving paradigms such as mass customization, personalization, changeability, re-configurability and flexibility. New and important concepts such as the dynamic product families and platforms, co-evolution of products and systems, and methods for enhancing manufacturing systems' economic sustainability and prolonging their life to produce more than one product generation are treated. Enablers of change in manufacturing systems, production volume and capability, scalability and managing the volatility of markets, competition among global enterprises and the increasing complexity of products, manufacturing systems and management strategies are discussed. Industry challenges and future directions for research and development needed to help both practitioners and academicians are presented. About the Editor Prof. Dr.-Ing. Michael F. Zaeh, born in 1963, has been and is Professor for and Manufacturing Technology since 2002 and, together with Prof. Dr.-Ing. Gunther Reinhart, Head of the Institute for Machine Tools and Industrial Management (iwb) at the Technische Universitaet Muenchen (TUM). After studying general mechanical engineering, he was doctoral candidate under Prof. Dr.-Ing. Joachim Milberg at TUM from 1990 until 1993 and received his doctorate in 1993. From 1994 to 1995, he was department leader under Prof. Dr.-Ing. Gunther Reinhart. From 1996 to 2002, he worked for a machine tool manufacturer in several positions, most recently as a member of the extended management. Prof. Dr.-Ing. Michael F. Zaeh is an associated member of the CIRP and member of acatech, WGP and WLP. His current researches include among others Joining and Cutting Technologies like Laser Cutting and Welding as well as Friction Stir Welding, Structural Behaviour and Energy Efficiency of Machine Tools and Manufacturing Processes like Additive Manufacturing.
