Compatibility of Liquid and Vapor Alkali Metals with Construction Materials

Compatibility of Liquid and Vapor Alkali Metals with Construction Materials

Author: John H. Stang

Publisher:

Published: 1966

Total Pages: 124

ISBN-13:

DOWNLOAD EBOOK

This report presents the highlights of what has been ascertained about the interactions of liquid and vapor sodium, NaK potassium, lithium, and cesium with solid materials of potential use in practical liquid-metal systems. Data for inclusion were selected by the authors on the basis of their practical utility to designers and research workers. There has been an accelerating interest in alkali metals as (1) coolants for fast-breeder nuclear reactors, (2) coolants in space power plants, (3) Rankine-cycle working fluids in high- temperature nuclear reactors, (4) propellants in ion-propulsion engines, (5) seeding materials in magnetohydrodynamic generators, (6) space-charge dissipating media in thermionic generators, and (7) high-temperature hydraulic fluids. Prominent among the liquid-metals research efforts are studies directed toward finding the best containment material for a given alkali under a given set of operating conditions.


Book Synopsis Compatibility of Liquid and Vapor Alkali Metals with Construction Materials by : John H. Stang

Download or read book Compatibility of Liquid and Vapor Alkali Metals with Construction Materials written by John H. Stang and published by . This book was released on 1966 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents the highlights of what has been ascertained about the interactions of liquid and vapor sodium, NaK potassium, lithium, and cesium with solid materials of potential use in practical liquid-metal systems. Data for inclusion were selected by the authors on the basis of their practical utility to designers and research workers. There has been an accelerating interest in alkali metals as (1) coolants for fast-breeder nuclear reactors, (2) coolants in space power plants, (3) Rankine-cycle working fluids in high- temperature nuclear reactors, (4) propellants in ion-propulsion engines, (5) seeding materials in magnetohydrodynamic generators, (6) space-charge dissipating media in thermionic generators, and (7) high-temperature hydraulic fluids. Prominent among the liquid-metals research efforts are studies directed toward finding the best containment material for a given alkali under a given set of operating conditions.


Aerospace Structural Metals Handbook

Aerospace Structural Metals Handbook

Author:

Publisher:

Published: 1989

Total Pages: 828

ISBN-13:

DOWNLOAD EBOOK


Book Synopsis Aerospace Structural Metals Handbook by :

Download or read book Aerospace Structural Metals Handbook written by and published by . This book was released on 1989 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt:


TID.

TID.

Author:

Publisher:

Published: 1972

Total Pages: 1062

ISBN-13:

DOWNLOAD EBOOK


Book Synopsis TID. by :

Download or read book TID. written by and published by . This book was released on 1972 with total page 1062 pages. Available in PDF, EPUB and Kindle. Book excerpt:


Critical Materials Problems In Energy Production

Critical Materials Problems In Energy Production

Author: Charles Stein

Publisher: Elsevier

Published: 2012-12-02

Total Pages: 928

ISBN-13: 0323141625

DOWNLOAD EBOOK

Critical Materials Problems in Energy Production discusses the most challenging of the materials problems in the areas of production, distribution, and energy storage. This book is a result of the Distinguished Lecture Series on “Critical Materials Problems in Energy Production sponsored by the Joint Center for Materials Science in New Mexico. This text is organized into eight sections encompassing 29 chapters that cover topics on nuclear power, materials for high-temperature applications, solar energy, direct solar conversion, coal and other fossil fuels, superconducting materials, and energy storage devices. After a brief introduction to overall perspective of the energy program, the book goes on discussing the problems encountered in nuclear power generation, including the complication of their interdependence, the severity of the service parameters, and the need for safety and reliability. Section II examines the progress made in the development of high-temperature materials suitable for use in magnetohydrodynamic converts and advanced turbines and jet engines. The subsequent two sections address the thermal/optical requirements for solar utilization devices and the limitations encountered in solar cell materials. Section V deals with the metallurgical problems emanating from the materials used for confinement and the flow of energy in steam generating systems. This section also describes the close dependence of catalytic performance on technological innovations in the field of materials science. Section VI discusses the basics of superconductivity phenomena. Section VII deals with the materials problems related to the development of more efficient batteries. Discussions on new electrode materials, solid electrolytes, and high-temperature battery systems are included in this section. The concluding section provides supplemental texts containing references and readings.


Book Synopsis Critical Materials Problems In Energy Production by : Charles Stein

Download or read book Critical Materials Problems In Energy Production written by Charles Stein and published by Elsevier. This book was released on 2012-12-02 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt: Critical Materials Problems in Energy Production discusses the most challenging of the materials problems in the areas of production, distribution, and energy storage. This book is a result of the Distinguished Lecture Series on “Critical Materials Problems in Energy Production sponsored by the Joint Center for Materials Science in New Mexico. This text is organized into eight sections encompassing 29 chapters that cover topics on nuclear power, materials for high-temperature applications, solar energy, direct solar conversion, coal and other fossil fuels, superconducting materials, and energy storage devices. After a brief introduction to overall perspective of the energy program, the book goes on discussing the problems encountered in nuclear power generation, including the complication of their interdependence, the severity of the service parameters, and the need for safety and reliability. Section II examines the progress made in the development of high-temperature materials suitable for use in magnetohydrodynamic converts and advanced turbines and jet engines. The subsequent two sections address the thermal/optical requirements for solar utilization devices and the limitations encountered in solar cell materials. Section V deals with the metallurgical problems emanating from the materials used for confinement and the flow of energy in steam generating systems. This section also describes the close dependence of catalytic performance on technological innovations in the field of materials science. Section VI discusses the basics of superconductivity phenomena. Section VII deals with the materials problems related to the development of more efficient batteries. Discussions on new electrode materials, solid electrolytes, and high-temperature battery systems are included in this section. The concluding section provides supplemental texts containing references and readings.


Numerical investigation of a thermal storage system using sodium as heat transfer fluid (KIT Scientific Reports ; 7755)

Numerical investigation of a thermal storage system using sodium as heat transfer fluid (KIT Scientific Reports ; 7755)

Author: Niedermeier, Klarissa

Publisher: KIT Scientific Publishing

Published: 2019-10-10

Total Pages: 208

ISBN-13: 373150930X

DOWNLOAD EBOOK


Book Synopsis Numerical investigation of a thermal storage system using sodium as heat transfer fluid (KIT Scientific Reports ; 7755) by : Niedermeier, Klarissa

Download or read book Numerical investigation of a thermal storage system using sodium as heat transfer fluid (KIT Scientific Reports ; 7755) written by Niedermeier, Klarissa and published by KIT Scientific Publishing. This book was released on 2019-10-10 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt:


Minerals Yearbook

Minerals Yearbook

Author:

Publisher:

Published: 1967

Total Pages: 1280

ISBN-13:

DOWNLOAD EBOOK


Book Synopsis Minerals Yearbook by :

Download or read book Minerals Yearbook written by and published by . This book was released on 1967 with total page 1280 pages. Available in PDF, EPUB and Kindle. Book excerpt:


Reactor Materials

Reactor Materials

Author:

Publisher:

Published: 1967

Total Pages: 320

ISBN-13:

DOWNLOAD EBOOK


Book Synopsis Reactor Materials by :

Download or read book Reactor Materials written by and published by . This book was released on 1967 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt:


Index to DMIC Reports and Memoranda

Index to DMIC Reports and Memoranda

Author: Battelle Memorial Institute. Defense Metals Information Center

Publisher:

Published: 1968

Total Pages: 38

ISBN-13:

DOWNLOAD EBOOK


Book Synopsis Index to DMIC Reports and Memoranda by : Battelle Memorial Institute. Defense Metals Information Center

Download or read book Index to DMIC Reports and Memoranda written by Battelle Memorial Institute. Defense Metals Information Center and published by . This book was released on 1968 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:


Fiber-reinforced Metal-matrix Composites

Fiber-reinforced Metal-matrix Composites

Author: Curtis Maitland Jackson

Publisher:

Published: 1967

Total Pages: 68

ISBN-13:

DOWNLOAD EBOOK

The introductory sections contain a brief discussion of the general methods of producing fiber-reinforced composites and of the theory of fiber-reinforcement of metals. The body of the report describes research on fiber-reinforced metal matrix composites, and is organized according to metal matrix materials. For convenience, the report is divided into two sections: Low density matrices (including aluminum, magnesium, and titanium and their alloys) and high density matrices (cobalt, copper and its alloys, iron, lead-tin alloys, nickel and nickel alloys, silver, tantalum, and tungsten). (Author).


Book Synopsis Fiber-reinforced Metal-matrix Composites by : Curtis Maitland Jackson

Download or read book Fiber-reinforced Metal-matrix Composites written by Curtis Maitland Jackson and published by . This book was released on 1967 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: The introductory sections contain a brief discussion of the general methods of producing fiber-reinforced composites and of the theory of fiber-reinforcement of metals. The body of the report describes research on fiber-reinforced metal matrix composites, and is organized according to metal matrix materials. For convenience, the report is divided into two sections: Low density matrices (including aluminum, magnesium, and titanium and their alloys) and high density matrices (cobalt, copper and its alloys, iron, lead-tin alloys, nickel and nickel alloys, silver, tantalum, and tungsten). (Author).


Summary of Contractor Results in Support of the Refractory Metals Sheet Rolling Program

Summary of Contractor Results in Support of the Refractory Metals Sheet Rolling Program

Author: D. J. Maykuth

Publisher:

Published: 1966

Total Pages: 108

ISBN-13:

DOWNLOAD EBOOK

This report summarizes the achievements on fourteen programs that were conducted in support of the Metals Sheet Rolling Program. These included programs for developing practices to produce large sheets from two grades of unalloyed tungsten (via powder metallurgy and arc melting, respectively), as well as for the Mo-0.5Ti, Mo-0.5Ti-0.1Zr-0.03C (TZM), Cb-10W-1Zr-0.1C (D-43), Cb-10W-2.5Zr (Cb-752), and Ta-30Cb-7.5V alloys. In addition, pilot sheet-rolling programs were also carried out for the Cb-27Ta-10W-1Zr (FS-85), Cb-5Mo-5V-1Zr (B-66), Ta-7W-3Re (GE-473), and Ta-9.6W-2.4Hf-0.01C (T-222) compositions.


Book Synopsis Summary of Contractor Results in Support of the Refractory Metals Sheet Rolling Program by : D. J. Maykuth

Download or read book Summary of Contractor Results in Support of the Refractory Metals Sheet Rolling Program written by D. J. Maykuth and published by . This book was released on 1966 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report summarizes the achievements on fourteen programs that were conducted in support of the Metals Sheet Rolling Program. These included programs for developing practices to produce large sheets from two grades of unalloyed tungsten (via powder metallurgy and arc melting, respectively), as well as for the Mo-0.5Ti, Mo-0.5Ti-0.1Zr-0.03C (TZM), Cb-10W-1Zr-0.1C (D-43), Cb-10W-2.5Zr (Cb-752), and Ta-30Cb-7.5V alloys. In addition, pilot sheet-rolling programs were also carried out for the Cb-27Ta-10W-1Zr (FS-85), Cb-5Mo-5V-1Zr (B-66), Ta-7W-3Re (GE-473), and Ta-9.6W-2.4Hf-0.01C (T-222) compositions.