Author: Nicoleta Ileana Dumitru
Publisher:
Published: 2005
Total Pages: 46
ISBN-13:
DOWNLOAD EBOOKA suburban city street in Kansas was rehabilitated with a 50 mm (2 in.) Portland Cement Concrete (PCC) thin overlay, commonly known as ultra-thin whitetopping (UTW). The construction and performance of this UTW project have been described in this report. The project, constructed in the Spring of 1995, incorporated the following design features: 0.9 m x 0.9 m (3 ft x 3 ft) panels versus 1.2 m x 1.2 m (4 ft x 4 ft) panels, plain versus fiber reinforced concrete, and sealed versus unsealed joints. The project has performed fairly well to date although some test sections needed periodic maintenance and all of the test sections except two have been overlaid as of October 2001. Experience on this project shows that the UTW overlay can be easily built with conventional equipment and locally available materials. UTW also permits a skid-resistant finish to be applied. Excellent smoothness can also be obtained although the slab thickness is very small. Corner cracking appears to be the most dominant distress type, though it was observed that bond existed between the concrete and the asphalt layers even for the cracked panels. The bond appeared to degrade with time. Joint spacing has a significant effect on performance. The sections with smaller joint spacing appeared to perform better. The performance of the sections with fibers in concrete was inconclusive. Also, joint sealing did not appear to affect the performance.
Book Synopsis Construction and Performance of Ultra-thin Whitetopping in Kansas by : Nicoleta Ileana Dumitru
Download or read book Construction and Performance of Ultra-thin Whitetopping in Kansas written by Nicoleta Ileana Dumitru and published by . This book was released on 2005 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt: A suburban city street in Kansas was rehabilitated with a 50 mm (2 in.) Portland Cement Concrete (PCC) thin overlay, commonly known as ultra-thin whitetopping (UTW). The construction and performance of this UTW project have been described in this report. The project, constructed in the Spring of 1995, incorporated the following design features: 0.9 m x 0.9 m (3 ft x 3 ft) panels versus 1.2 m x 1.2 m (4 ft x 4 ft) panels, plain versus fiber reinforced concrete, and sealed versus unsealed joints. The project has performed fairly well to date although some test sections needed periodic maintenance and all of the test sections except two have been overlaid as of October 2001. Experience on this project shows that the UTW overlay can be easily built with conventional equipment and locally available materials. UTW also permits a skid-resistant finish to be applied. Excellent smoothness can also be obtained although the slab thickness is very small. Corner cracking appears to be the most dominant distress type, though it was observed that bond existed between the concrete and the asphalt layers even for the cracked panels. The bond appeared to degrade with time. Joint spacing has a significant effect on performance. The sections with smaller joint spacing appeared to perform better. The performance of the sections with fibers in concrete was inconclusive. Also, joint sealing did not appear to affect the performance.
