Download Construction Supply Chain Management In The Fourth Industrial Revolution Era full books in PDF, epub, and Kindle. Read online Construction Supply Chain Management In The Fourth Industrial Revolution Era ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Providing invaluable support for construction in determining the acceptable practice and standard for regulatory bodies and managers, Construction Supply Chain Management in the Fourth Industrial Revolution Era also appeals to researchers as it expands the frontiers of knowledge in the fourth industrial era.
Book Synopsis Construction Supply Chain Management in the Fourth Industrial Revolution Era by : Temidayo Oluwasola Osunsanmi
Download or read book Construction Supply Chain Management in the Fourth Industrial Revolution Era written by Temidayo Oluwasola Osunsanmi and published by Emerald Group Publishing. This book was released on 2022-09-23 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing invaluable support for construction in determining the acceptable practice and standard for regulatory bodies and managers, Construction Supply Chain Management in the Fourth Industrial Revolution Era also appeals to researchers as it expands the frontiers of knowledge in the fourth industrial era.
Providing invaluable support for construction in determining the acceptable practice and standard for regulatory bodies and managers, Construction Supply Chain Management in the Fourth Industrial Revolution Era also appeals to researchers as it expands the frontiers of knowledge in the fourth industrial era.
Book Synopsis Construction Supply Chain Management in the Fourth Industrial Revolution Era by : Temidayo Oluwasola Osunsanmi
Download or read book Construction Supply Chain Management in the Fourth Industrial Revolution Era written by Temidayo Oluwasola Osunsanmi and published by Emerald Group Publishing. This book was released on 2022-09-23 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing invaluable support for construction in determining the acceptable practice and standard for regulatory bodies and managers, Construction Supply Chain Management in the Fourth Industrial Revolution Era also appeals to researchers as it expands the frontiers of knowledge in the fourth industrial era.
World-renowned economist Klaus Schwab, Founder and Executive Chairman of the World Economic Forum, explains that we have an opportunity to shape the fourth industrial revolution, which will fundamentally alter how we live and work. Schwab argues that this revolution is different in scale, scope and complexity from any that have come before. Characterized by a range of new technologies that are fusing the physical, digital and biological worlds, the developments are affecting all disciplines, economies, industries and governments, and even challenging ideas about what it means to be human. Artificial intelligence is already all around us, from supercomputers, drones and virtual assistants to 3D printing, DNA sequencing, smart thermostats, wearable sensors and microchips smaller than a grain of sand. But this is just the beginning: nanomaterials 200 times stronger than steel and a million times thinner than a strand of hair and the first transplant of a 3D printed liver are already in development. Imagine “smart factories” in which global systems of manufacturing are coordinated virtually, or implantable mobile phones made of biosynthetic materials. The fourth industrial revolution, says Schwab, is more significant, and its ramifications more profound, than in any prior period of human history. He outlines the key technologies driving this revolution and discusses the major impacts expected on government, business, civil society and individuals. Schwab also offers bold ideas on how to harness these changes and shape a better future—one in which technology empowers people rather than replaces them; progress serves society rather than disrupts it; and in which innovators respect moral and ethical boundaries rather than cross them. We all have the opportunity to contribute to developing new frameworks that advance progress.
Book Synopsis The Fourth Industrial Revolution by : Klaus Schwab
Download or read book The Fourth Industrial Revolution written by Klaus Schwab and published by Currency. This book was released on 2017-01-03 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: World-renowned economist Klaus Schwab, Founder and Executive Chairman of the World Economic Forum, explains that we have an opportunity to shape the fourth industrial revolution, which will fundamentally alter how we live and work. Schwab argues that this revolution is different in scale, scope and complexity from any that have come before. Characterized by a range of new technologies that are fusing the physical, digital and biological worlds, the developments are affecting all disciplines, economies, industries and governments, and even challenging ideas about what it means to be human. Artificial intelligence is already all around us, from supercomputers, drones and virtual assistants to 3D printing, DNA sequencing, smart thermostats, wearable sensors and microchips smaller than a grain of sand. But this is just the beginning: nanomaterials 200 times stronger than steel and a million times thinner than a strand of hair and the first transplant of a 3D printed liver are already in development. Imagine “smart factories” in which global systems of manufacturing are coordinated virtually, or implantable mobile phones made of biosynthetic materials. The fourth industrial revolution, says Schwab, is more significant, and its ramifications more profound, than in any prior period of human history. He outlines the key technologies driving this revolution and discusses the major impacts expected on government, business, civil society and individuals. Schwab also offers bold ideas on how to harness these changes and shape a better future—one in which technology empowers people rather than replaces them; progress serves society rather than disrupts it; and in which innovators respect moral and ethical boundaries rather than cross them. We all have the opportunity to contribute to developing new frameworks that advance progress.
Through a critical review of existing related theories and models, the authors address gaps in existing workforce management studies and propose a conceptual model to improve the management of workers in the construction industry.
Book Synopsis Construction Workforce Management in the Fourth Industrial Revolution Era by : Lerato Aghimien
Download or read book Construction Workforce Management in the Fourth Industrial Revolution Era written by Lerato Aghimien and published by Emerald Publishing Limited. This book was released on 2024-02-12 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Through a critical review of existing related theories and models, the authors address gaps in existing workforce management studies and propose a conceptual model to improve the management of workers in the construction industry.
Industrial revolutions have impacted both, manufacturing and service. From the steam engine to digital automated production, the industrial revolutions have conduced significant changes in operations and supply chain management (SCM) processes. Swift changes in manufacturing and service systems have led to phenomenal improvements in productivity. The fast-paced environment brings new challenges and opportunities for the companies that are associated with the adaptation to the new concepts such as Internet of Things (IoT) and Cyber Physical Systems, artificial intelligence (AI), robotics, cyber security, data analytics, block chain and cloud technology. These emerging technologies facilitated and expedited the birth of Logistics 4.0. Industrial Revolution 4.0 initiatives in SCM has attracted stakeholders’ attentions due to it is ability to empower using a set of technologies together that helps to execute more efficient production and distribution systems. This initiative has been called Logistics 4.0 of the fourth Industrial Revolution in SCM due to its high potential. Connecting entities, machines, physical items and enterprise resources to each other by using sensors, devices and the internet along the supply chains are the main attributes of Logistics 4.0. IoT enables customers to make more suitable and valuable decisions due to the data-driven structure of the Industry 4.0 paradigm. Besides that, the system’s ability of gathering and analyzing information about the environment at any given time and adapting itself to the rapid changes add significant value to the SCM processes. In this peer-reviewed book, experts from all over the world, in the field present a conceptual framework for Logistics 4.0 and provide examples for usage of Industry 4.0 tools in SCM. This book is a work that will be beneficial for both practitioners and students and academicians, as it covers the theoretical framework, on the one hand, and includes examples of practice and real world.
Book Synopsis Logistics 4.0 by : Turan Paksoy
Download or read book Logistics 4.0 written by Turan Paksoy and published by CRC Press. This book was released on 2020-12-17 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial revolutions have impacted both, manufacturing and service. From the steam engine to digital automated production, the industrial revolutions have conduced significant changes in operations and supply chain management (SCM) processes. Swift changes in manufacturing and service systems have led to phenomenal improvements in productivity. The fast-paced environment brings new challenges and opportunities for the companies that are associated with the adaptation to the new concepts such as Internet of Things (IoT) and Cyber Physical Systems, artificial intelligence (AI), robotics, cyber security, data analytics, block chain and cloud technology. These emerging technologies facilitated and expedited the birth of Logistics 4.0. Industrial Revolution 4.0 initiatives in SCM has attracted stakeholders’ attentions due to it is ability to empower using a set of technologies together that helps to execute more efficient production and distribution systems. This initiative has been called Logistics 4.0 of the fourth Industrial Revolution in SCM due to its high potential. Connecting entities, machines, physical items and enterprise resources to each other by using sensors, devices and the internet along the supply chains are the main attributes of Logistics 4.0. IoT enables customers to make more suitable and valuable decisions due to the data-driven structure of the Industry 4.0 paradigm. Besides that, the system’s ability of gathering and analyzing information about the environment at any given time and adapting itself to the rapid changes add significant value to the SCM processes. In this peer-reviewed book, experts from all over the world, in the field present a conceptual framework for Logistics 4.0 and provide examples for usage of Industry 4.0 tools in SCM. This book is a work that will be beneficial for both practitioners and students and academicians, as it covers the theoretical framework, on the one hand, and includes examples of practice and real world.
This book provides readers with an insightful understanding of the various emerging issues in the construction industry, especially in the area associated with United Nations developmental goals, 4th Industrial Revolution, Health and Safety, Sustainability, Skills and Capacity development. The need for all practitioner to understand growing issues surrounding the various evolving concepts or technologies in the construction industry remain critical to stakeholders if any meaningful gains are expected. This book explains the importance of inclusion, health and safety, skills development, collaboration, pandemics, the fourth industrial revolution, capacity building, and green finance, among others. Thus, it provides an in-depth understanding of the issues mentioned in developed and developing countries for construction professionals, researchers, educators, and other stakeholders. The book can be adopted as a research guide, framework, and reference on the emerging concepts in construction practices.
Book Synopsis Emerging Debates in the Construction Industry by : Ernest Kissi
Download or read book Emerging Debates in the Construction Industry written by Ernest Kissi and published by Taylor & Francis. This book was released on 2023-05-09 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with an insightful understanding of the various emerging issues in the construction industry, especially in the area associated with United Nations developmental goals, 4th Industrial Revolution, Health and Safety, Sustainability, Skills and Capacity development. The need for all practitioner to understand growing issues surrounding the various evolving concepts or technologies in the construction industry remain critical to stakeholders if any meaningful gains are expected. This book explains the importance of inclusion, health and safety, skills development, collaboration, pandemics, the fourth industrial revolution, capacity building, and green finance, among others. Thus, it provides an in-depth understanding of the issues mentioned in developed and developing countries for construction professionals, researchers, educators, and other stakeholders. The book can be adopted as a research guide, framework, and reference on the emerging concepts in construction practices.
The construction industry is associated with problems such as low productivity and high costs. This has been highlighted in several government-funded reports in both Sweden and in the UK during the course of over two decades. The construction industry is a large industry sector employing hundreds of thousands and a large contributor to a country’s GDP. The problems therefore have a large impact on society. Some of the problems are rooted in the organizational structure of the construction industry. Compared to other manufacturing industries, the construction industry is organized in temporary organizations. The temporary organizations cause temporary supply chains, fragmentation among construction industry actors and adversarial relationships between those actors. Partnering has been but forward as a solution to overcome the temporariness and the adversarial relationships in the construction. Another solution to mitigate the problems suggested in the reports is supply chain management (SCM). Both concepts have been taken from the manufacturing industries and partnering has been more successful compared to SCM in the construction industry. In the construction industry the progress towards SCM has focused on logistics. In recent years dedicated third-party logistics (TPL) solutions have emerged in the Swedish construction industry, where a company is hired to manage the logistics in a construction project. The purpose with the research presented in this licentiate thesis is to explore how client initiated TPL solutions and partnering can be facilitators for SCM in the construction industry. Being a new phenomenon in the construction industry TPL solutions provide a logistical competence not necessarily included in a traditional construction project. Therefore, TPL solutions are of particular interest when studying the realization of SCM in the construction industry. In the process of realizing SCM in the construction industry, the construction clients have been put forward as having a crucial and important role. The clients are the initiator and funder of construction projects and as such the client can influence the course of a construction project. Therefore, it is of interest to study how the client can take an active role in this process. Initiating a TPL solution in a construction project is one way for a client to take an active part in the realization of SCM in construction. However, in order to study how clients can take an active role towards the realization of SCM in the construction industry, there have to be an understanding of how SCM is to be adopted to the construction industry context. SCM that derives from the manufacturing industry is designed to be used in long-term relationships with permanent organizational structures. The construction industry on the other hand is associated with short-term relationships and a temporary organizational structure. Partnering that is designed to mitigate the temporariness and establish long-term relationships have been quite successful in the construction industry, and could therefore be used as a facilitator for SCM in construction. To study the use of client initiated TPL-solutions in construction and the realization of SCM in the construction industry the following research questions have been addressed: RQ1: To what extent can a third-party logistics solution be a facilitator for client driven SCM in the construction industry?RQ2: How will upstream and downstream tiers be affected when a thirdparty logistics provider is used in a construction project?RQ3: How can partnering be used a mean to facilitate the realization of SCM in the construction industry? To answer the research questions two main methodologies have been used; case study for the empirically grounded research and conceptual studies for the analysis of the case studies as well as for comparing the two concepts of partnering and SCM. All questions have been grounded in literature and previous research. The findings of this research is therefore grounded in both theory and in practice. The main findings of this research is that TPL solutions are not a quick fix for realizing SCM in the construction industry. However, if used right a TPL solution can be an effective tool to address logistical issues in a construction project and to establish an interface between the supply chain and the construction site. By initiating a TPL solution the client addresses the importance of logistical competence in a construction project. A TPL solution does not have a purpose of its own; a TPL solution is a service function to the construction project, providing expertise on logistics management. There are also a number of driving forces and concerns that have been identified, if they are addressed prior to a TPL solution is implemented, the likelihood of its success will increase. Furthermore, both partnering and SCM rely on high trust and share several key components and issues that have to be addressed. Partnering on strategic level with several suppliers included can even be hard to distinguish from SCM. Wherefore, partnering is considered a facilitator for the realization of SCM in construction. By addressing the necessary issues in both concepts a good foundation for SCM is established.
Book Synopsis Exploring Third-Party Logistics and Partnering in Construction by : Andreas Ekeskär
Download or read book Exploring Third-Party Logistics and Partnering in Construction written by Andreas Ekeskär and published by Linköping University Electronic Press. This book was released on 2016-06-01 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: The construction industry is associated with problems such as low productivity and high costs. This has been highlighted in several government-funded reports in both Sweden and in the UK during the course of over two decades. The construction industry is a large industry sector employing hundreds of thousands and a large contributor to a country’s GDP. The problems therefore have a large impact on society. Some of the problems are rooted in the organizational structure of the construction industry. Compared to other manufacturing industries, the construction industry is organized in temporary organizations. The temporary organizations cause temporary supply chains, fragmentation among construction industry actors and adversarial relationships between those actors. Partnering has been but forward as a solution to overcome the temporariness and the adversarial relationships in the construction. Another solution to mitigate the problems suggested in the reports is supply chain management (SCM). Both concepts have been taken from the manufacturing industries and partnering has been more successful compared to SCM in the construction industry. In the construction industry the progress towards SCM has focused on logistics. In recent years dedicated third-party logistics (TPL) solutions have emerged in the Swedish construction industry, where a company is hired to manage the logistics in a construction project. The purpose with the research presented in this licentiate thesis is to explore how client initiated TPL solutions and partnering can be facilitators for SCM in the construction industry. Being a new phenomenon in the construction industry TPL solutions provide a logistical competence not necessarily included in a traditional construction project. Therefore, TPL solutions are of particular interest when studying the realization of SCM in the construction industry. In the process of realizing SCM in the construction industry, the construction clients have been put forward as having a crucial and important role. The clients are the initiator and funder of construction projects and as such the client can influence the course of a construction project. Therefore, it is of interest to study how the client can take an active role in this process. Initiating a TPL solution in a construction project is one way for a client to take an active part in the realization of SCM in construction. However, in order to study how clients can take an active role towards the realization of SCM in the construction industry, there have to be an understanding of how SCM is to be adopted to the construction industry context. SCM that derives from the manufacturing industry is designed to be used in long-term relationships with permanent organizational structures. The construction industry on the other hand is associated with short-term relationships and a temporary organizational structure. Partnering that is designed to mitigate the temporariness and establish long-term relationships have been quite successful in the construction industry, and could therefore be used as a facilitator for SCM in construction. To study the use of client initiated TPL-solutions in construction and the realization of SCM in the construction industry the following research questions have been addressed: RQ1: To what extent can a third-party logistics solution be a facilitator for client driven SCM in the construction industry?RQ2: How will upstream and downstream tiers be affected when a thirdparty logistics provider is used in a construction project?RQ3: How can partnering be used a mean to facilitate the realization of SCM in the construction industry? To answer the research questions two main methodologies have been used; case study for the empirically grounded research and conceptual studies for the analysis of the case studies as well as for comparing the two concepts of partnering and SCM. All questions have been grounded in literature and previous research. The findings of this research is therefore grounded in both theory and in practice. The main findings of this research is that TPL solutions are not a quick fix for realizing SCM in the construction industry. However, if used right a TPL solution can be an effective tool to address logistical issues in a construction project and to establish an interface between the supply chain and the construction site. By initiating a TPL solution the client addresses the importance of logistical competence in a construction project. A TPL solution does not have a purpose of its own; a TPL solution is a service function to the construction project, providing expertise on logistics management. There are also a number of driving forces and concerns that have been identified, if they are addressed prior to a TPL solution is implemented, the likelihood of its success will increase. Furthermore, both partnering and SCM rely on high trust and share several key components and issues that have to be addressed. Partnering on strategic level with several suppliers included can even be hard to distinguish from SCM. Wherefore, partnering is considered a facilitator for the realization of SCM in construction. By addressing the necessary issues in both concepts a good foundation for SCM is established.
Provides a unique overview of supply chain management (SCM) concepts, illustrating how the methodology can help enhance construction industry project success This book provides a unique appraisal of supply chain management (SCM) concepts brought together with lessons from industry and analysis gathered from extensive research on how supply chains are managed in the construction industry. The research from leading international academics has been drawn together with the experience from some of the industry's foremost SCM practitioners to provide both the experienced researcher and the industry practitioner a thorough grounding in its principles, as well as an illustration of SCM as a methodology for enhancing construction industry project success. The new edition of Successful Construction Supply Chain Management: Concepts and Case Studies incorporate chapters dealing with Building Information Modelling, sustainability, the ‘Demand Chain' in projects, the link between self-organizing networks and supply chains, decision-making, ‘Lean,’ and mega-projects. Other chapters cover risk transfer and allocation, behaviors, innovation, trust, supply chain design, alliances, and knowledge transfer. Supply Chain Management techniques have been used successfully in various industries, such as manufacturing and food processing, for decades Fully updated with new chapters dealing with key construction industry topics such as BIM, sustainability, the ‘Demand Chain' in projects, ‘Lean,’ mega-projects, and more Includes contributions from well established academics and practitioners from Network Rail, mainstream construction, and consultancy Illustrates how SCM methodologies can be used to enhance construction industry project success Successful Construction Supply Chain Management: Concepts and Case Studies is an ideal book for postgraduate students at MSc and PhD level studying the topic and for all construction management practitioners.
Book Synopsis Successful Construction Supply Chain Management by : Stephen Pryke
Download or read book Successful Construction Supply Chain Management written by Stephen Pryke and published by John Wiley & Sons. This book was released on 2020-02-25 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a unique overview of supply chain management (SCM) concepts, illustrating how the methodology can help enhance construction industry project success This book provides a unique appraisal of supply chain management (SCM) concepts brought together with lessons from industry and analysis gathered from extensive research on how supply chains are managed in the construction industry. The research from leading international academics has been drawn together with the experience from some of the industry's foremost SCM practitioners to provide both the experienced researcher and the industry practitioner a thorough grounding in its principles, as well as an illustration of SCM as a methodology for enhancing construction industry project success. The new edition of Successful Construction Supply Chain Management: Concepts and Case Studies incorporate chapters dealing with Building Information Modelling, sustainability, the ‘Demand Chain' in projects, the link between self-organizing networks and supply chains, decision-making, ‘Lean,’ and mega-projects. Other chapters cover risk transfer and allocation, behaviors, innovation, trust, supply chain design, alliances, and knowledge transfer. Supply Chain Management techniques have been used successfully in various industries, such as manufacturing and food processing, for decades Fully updated with new chapters dealing with key construction industry topics such as BIM, sustainability, the ‘Demand Chain' in projects, ‘Lean,’ mega-projects, and more Includes contributions from well established academics and practitioners from Network Rail, mainstream construction, and consultancy Illustrates how SCM methodologies can be used to enhance construction industry project success Successful Construction Supply Chain Management: Concepts and Case Studies is an ideal book for postgraduate students at MSc and PhD level studying the topic and for all construction management practitioners.
Continuous Cost Improvement in Construction: Theory and Practice aims to provide students and practitioners with an all-inclusive understanding of strategies for adopting continuous improvement in construction cost management. This book addresses continuous improvement practices from the perspective of cost management and applies case study examples to question the readers’ perspective of continuous cost improvement strategies in the project lifecycle. Continuous cost improvement practices in managing the cost of minor, major, and mega projects are all connected with decision-making tools for devising strategies for choosing the approaches for mitigating the effect of cost overruns in construction projects. Continuous cost improvement should be taught as part of modern methods and processes of construction in further and higher education institutions. This book will be key reading for all advanced undergraduate and postgraduate courses in Construction Project Management, Building and Quantity Surveying. Professionals in all aspects of the AEC industry will also gain greatly from engaging with the key concepts of continuous cost improvement throughout this book.
Book Synopsis Continuous Cost Improvement in Construction by : Temitope Seun Omotayo
Download or read book Continuous Cost Improvement in Construction written by Temitope Seun Omotayo and published by Routledge. This book was released on 2022-03-21 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continuous Cost Improvement in Construction: Theory and Practice aims to provide students and practitioners with an all-inclusive understanding of strategies for adopting continuous improvement in construction cost management. This book addresses continuous improvement practices from the perspective of cost management and applies case study examples to question the readers’ perspective of continuous cost improvement strategies in the project lifecycle. Continuous cost improvement practices in managing the cost of minor, major, and mega projects are all connected with decision-making tools for devising strategies for choosing the approaches for mitigating the effect of cost overruns in construction projects. Continuous cost improvement should be taught as part of modern methods and processes of construction in further and higher education institutions. This book will be key reading for all advanced undergraduate and postgraduate courses in Construction Project Management, Building and Quantity Surveying. Professionals in all aspects of the AEC industry will also gain greatly from engaging with the key concepts of continuous cost improvement throughout this book.
This open access book explores the concept of Industry 4.0, which presents a considerable challenge for the production and service sectors. While digitization initiatives are usually integrated into the central corporate strategy of larger companies, smaller firms often have problems putting Industry 4.0 paradigms into practice. Small and medium-sized enterprises (SMEs) possess neither the human nor financial resources to systematically investigate the potential and risks of introducing Industry 4.0. Addressing this obstacle, the international team of authors focuses on the development of smart manufacturing concepts, logistics solutions and managerial models specifically for SMEs. Aiming to provide methodological frameworks and pilot solutions for SMEs during their digital transformation, this innovative and timely book will be of great use to scholars researching technology management, digitization and small business, as well as practitioners within manufacturing companies.
Book Synopsis Industry 4.0 for SMEs by : Dominik T. Matt
Download or read book Industry 4.0 for SMEs written by Dominik T. Matt and published by Springer Nature. This book was released on 2020-01-03 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book explores the concept of Industry 4.0, which presents a considerable challenge for the production and service sectors. While digitization initiatives are usually integrated into the central corporate strategy of larger companies, smaller firms often have problems putting Industry 4.0 paradigms into practice. Small and medium-sized enterprises (SMEs) possess neither the human nor financial resources to systematically investigate the potential and risks of introducing Industry 4.0. Addressing this obstacle, the international team of authors focuses on the development of smart manufacturing concepts, logistics solutions and managerial models specifically for SMEs. Aiming to provide methodological frameworks and pilot solutions for SMEs during their digital transformation, this innovative and timely book will be of great use to scholars researching technology management, digitization and small business, as well as practitioners within manufacturing companies.
