Designing plastics circulation:

Designing plastics circulation:

Author: Anne Raudaskoski

Publisher: Nordic Council of Ministers

Published: 2019-08-05

Total Pages: 41

ISBN-13: 9289362065

DOWNLOAD EBOOK

Presently most electrical/electronic equipment (EEE) is not designed for recycling, let alone for circulation. Plastics in these products account for 20% of material use, and through better design, significant environmental and financial savings could be gained. Technological solutions and circular design opportunities already exist, but they haven’t been implemented yet. Some challenges, such as ease of disassembly, could be resolved through better communication and by sharing learnings across the value chain.Instead of WEEE, we should focus on developing CEEE: Circular Electrical and Electronic Equipment.The case examples of this report show how different stages of the lifecycle can be designed so that plastics circulation becomes possible and makes business sense. It is time to take a leap in material flow management and scale up these circular solutions across the industry.


Book Synopsis Designing plastics circulation: by : Anne Raudaskoski

Download or read book Designing plastics circulation: written by Anne Raudaskoski and published by Nordic Council of Ministers. This book was released on 2019-08-05 with total page 41 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presently most electrical/electronic equipment (EEE) is not designed for recycling, let alone for circulation. Plastics in these products account for 20% of material use, and through better design, significant environmental and financial savings could be gained. Technological solutions and circular design opportunities already exist, but they haven’t been implemented yet. Some challenges, such as ease of disassembly, could be resolved through better communication and by sharing learnings across the value chain.Instead of WEEE, we should focus on developing CEEE: Circular Electrical and Electronic Equipment.The case examples of this report show how different stages of the lifecycle can be designed so that plastics circulation becomes possible and makes business sense. It is time to take a leap in material flow management and scale up these circular solutions across the industry.

Plastics Design Handbook

Plastics Design Handbook

Author: Marlene G. Rosato

Publisher: Springer Science & Business Media

Published: 2013-11-27

Total Pages: 697

ISBN-13: 1461513995

DOWNLOAD EBOOK

This book provides a simplified and practical approach to designing with plastics that funda mentally relates to the load, temperature, time, and environment subjected to a product. It will provide the basic behaviors in what to consider when designing plastic products to meet performance and cost requirements. Important aspects are presented such as understanding the advantages of different shapes and how they influence designs. Information is concise, comprehensive, and practical. Review includes designing with plastics based on material and process behaviors. As de signing with any materials (plastic, steel, aluminum, wood, etc.) it is important to know their behaviors in order to maximize product performance-to-cost efficiency. Examples of many different designed products are reviewed. They range from toys to medical devices to cars to boats to underwater devices to containers to springs to pipes to buildings to aircraft to space craft. The reader's product to be designed can directly or indirectly be related to product design reviews in the book. Important are behaviors associated and interrelated with plastic materials (thermoplastics, thermosets, elastomers, reinforced plastics, etc.) and fabricating processes (extrusion, injec tion molding, blow molding, forming, foaming, rotational molding, etc.). They are presented so that the technical or non-technical reader can readily understand the interrelationships.


Book Synopsis Plastics Design Handbook by : Marlene G. Rosato

Download or read book Plastics Design Handbook written by Marlene G. Rosato and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a simplified and practical approach to designing with plastics that funda mentally relates to the load, temperature, time, and environment subjected to a product. It will provide the basic behaviors in what to consider when designing plastic products to meet performance and cost requirements. Important aspects are presented such as understanding the advantages of different shapes and how they influence designs. Information is concise, comprehensive, and practical. Review includes designing with plastics based on material and process behaviors. As de signing with any materials (plastic, steel, aluminum, wood, etc.) it is important to know their behaviors in order to maximize product performance-to-cost efficiency. Examples of many different designed products are reviewed. They range from toys to medical devices to cars to boats to underwater devices to containers to springs to pipes to buildings to aircraft to space craft. The reader's product to be designed can directly or indirectly be related to product design reviews in the book. Important are behaviors associated and interrelated with plastic materials (thermoplastics, thermosets, elastomers, reinforced plastics, etc.) and fabricating processes (extrusion, injec tion molding, blow molding, forming, foaming, rotational molding, etc.). They are presented so that the technical or non-technical reader can readily understand the interrelationships.

Designing Successful Products with Plastics

Designing Successful Products with Plastics

Author: Mark T. MacLean-Blevins

Publisher: William Andrew

Published: 2017-08-28

Total Pages: 326

ISBN-13: 0323446485

DOWNLOAD EBOOK

Designing Successful Products with Plastics: Fundamentals of Plastic Part Design provides expert insight into design considerations required to bring a concept product or part through design and ready-for-production. The book shows how integrating four key choices—materials, processes, tooling and design—in every design decision allows the designer to fully vet and optimize the design. Rather than focusing on design rules and engineering equations used during product development, the emphasis of the book is on what the designer needs to consider during the early conceptual visualization stages, and in the detailed stages of the design process. This approach will bridge the gap between the industrial designer, tasked with the ‘big picture’ product design and use, and the part designer, tasked with the detailed plastic part design for manufacture. Useful to both experienced and novice designers, this book brings valuable design process information through specific examples, enabling designers and engineers in the plastics industry to effectively use the available technical information to successfully design and manufacture new products. Bridges the gap between the industrial designer working on product design and use, and the part designer working on detailed part design for manufacture Enables designers to establish a solid foundation for new product development on the ‘four pillars’ of the process: materials, processes, tooling, and design Provides a hierarchy and roadmap through creative product design and implementation, so engineers can translate a product from creative concept through to realization and commercialization


Book Synopsis Designing Successful Products with Plastics by : Mark T. MacLean-Blevins

Download or read book Designing Successful Products with Plastics written by Mark T. MacLean-Blevins and published by William Andrew. This book was released on 2017-08-28 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designing Successful Products with Plastics: Fundamentals of Plastic Part Design provides expert insight into design considerations required to bring a concept product or part through design and ready-for-production. The book shows how integrating four key choices—materials, processes, tooling and design—in every design decision allows the designer to fully vet and optimize the design. Rather than focusing on design rules and engineering equations used during product development, the emphasis of the book is on what the designer needs to consider during the early conceptual visualization stages, and in the detailed stages of the design process. This approach will bridge the gap between the industrial designer, tasked with the ‘big picture’ product design and use, and the part designer, tasked with the detailed plastic part design for manufacture. Useful to both experienced and novice designers, this book brings valuable design process information through specific examples, enabling designers and engineers in the plastics industry to effectively use the available technical information to successfully design and manufacture new products. Bridges the gap between the industrial designer working on product design and use, and the part designer working on detailed part design for manufacture Enables designers to establish a solid foundation for new product development on the ‘four pillars’ of the process: materials, processes, tooling, and design Provides a hierarchy and roadmap through creative product design and implementation, so engineers can translate a product from creative concept through to realization and commercialization

Designing with Plastics and Composites: A Handbook

Designing with Plastics and Composites: A Handbook

Author: Donald Rosato

Publisher: Springer Science & Business Media

Published: 2013-04-18

Total Pages: 984

ISBN-13: 1461597234

DOWNLOAD EBOOK

For some time there has been a strong need in the plastic and related industries for a detailed, practical book on designing with plastics and composites (reinforced plastics). This one-source book meets this criterion by clearly explaining all aspects of designing with plastics, as can be seen from the Table of Contents and Index. It provides information on what is ahead as well as today's technology. It explains how to interrelate the process of meeting design performance requirements with that of selecting the proper plastic and manufacturing process to make a product at the lowest cost. This book has been prepared with an awareness that its usefulness will depend greatly upon its simplicity. The overall guiding premise has therefore been to provide all essential information. Each chapter is organized to best present a methodology for designing with plastics and composites. of industrial designers, whether in engineering This book will prove useful to all types or involved in products, molds, dies or equipment, and to people in new-product ventures, research and development, marketing, purchasing, and management who are involved with such different products as appliances, the building industry, autos, boats, electronics, furniture, medical, recreation, space vehicles, and others. In this handbook the basic essentials of the properties and processing behaviors of plastics are presented in a single source intended to be one the user will want to keep within easy reach.


Book Synopsis Designing with Plastics and Composites: A Handbook by : Donald Rosato

Download or read book Designing with Plastics and Composites: A Handbook written by Donald Rosato and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 984 pages. Available in PDF, EPUB and Kindle. Book excerpt: For some time there has been a strong need in the plastic and related industries for a detailed, practical book on designing with plastics and composites (reinforced plastics). This one-source book meets this criterion by clearly explaining all aspects of designing with plastics, as can be seen from the Table of Contents and Index. It provides information on what is ahead as well as today's technology. It explains how to interrelate the process of meeting design performance requirements with that of selecting the proper plastic and manufacturing process to make a product at the lowest cost. This book has been prepared with an awareness that its usefulness will depend greatly upon its simplicity. The overall guiding premise has therefore been to provide all essential information. Each chapter is organized to best present a methodology for designing with plastics and composites. of industrial designers, whether in engineering This book will prove useful to all types or involved in products, molds, dies or equipment, and to people in new-product ventures, research and development, marketing, purchasing, and management who are involved with such different products as appliances, the building industry, autos, boats, electronics, furniture, medical, recreation, space vehicles, and others. In this handbook the basic essentials of the properties and processing behaviors of plastics are presented in a single source intended to be one the user will want to keep within easy reach.

Designing Successful Products with Plastics

Designing Successful Products with Plastics

Author: Mark T. MacLean-Blevins

Publisher: Elsevier

Published: 2024-05-15

Total Pages: 404

ISBN-13: 0443161151

DOWNLOAD EBOOK

Designing Successful Products with Plastics: Fundamentals of Plastic Part Design 2e provides expert insight into design considerations required to bring a concept product or part through design and ready-for-production. Rather than focusing on design rules and engineering equations used during product development, the emphasis of the book is on what the designer needs to consider during the early conceptual visualization stages, and in the detailed stages of the design process. This fully updated edition features new practical advice on how to design sustainably throughout the book. This approach will bridge the gap between the industrial designer, tasked with the ‘big picture’ product design and use, and the part designer, tasked with the detailed plastic part design for manufacture. Useful to both experienced and novice designers, this book brings valuable design process information through specific examples, enabling designers and engineers in the plastics industry to effectively use the available technical information to successfully design and manufacture new products. Brings together the worlds of the plastic part designer and the industrial designer and shows how each impacts the success of a development project. Teaches the “Four Pillars considerations (Materials, Processes, Tooling, and Design) required for every design decision to be made during a plastic part design project. The interrelationship of these considerations with the sustainability intent for the product being developed is taught and illustrated within this new edition. Illustrates the product design process roadmap from creation of the concept through implementation into manufacturing, highlighting steps and methods used throughout the process to limit risk and ensure success. Includes methods and design project management techniques used to ensure an efficient design process and successful manufacturing of the product or part.


Book Synopsis Designing Successful Products with Plastics by : Mark T. MacLean-Blevins

Download or read book Designing Successful Products with Plastics written by Mark T. MacLean-Blevins and published by Elsevier. This book was released on 2024-05-15 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designing Successful Products with Plastics: Fundamentals of Plastic Part Design 2e provides expert insight into design considerations required to bring a concept product or part through design and ready-for-production. Rather than focusing on design rules and engineering equations used during product development, the emphasis of the book is on what the designer needs to consider during the early conceptual visualization stages, and in the detailed stages of the design process. This fully updated edition features new practical advice on how to design sustainably throughout the book. This approach will bridge the gap between the industrial designer, tasked with the ‘big picture’ product design and use, and the part designer, tasked with the detailed plastic part design for manufacture. Useful to both experienced and novice designers, this book brings valuable design process information through specific examples, enabling designers and engineers in the plastics industry to effectively use the available technical information to successfully design and manufacture new products. Brings together the worlds of the plastic part designer and the industrial designer and shows how each impacts the success of a development project. Teaches the “Four Pillars considerations (Materials, Processes, Tooling, and Design) required for every design decision to be made during a plastic part design project. The interrelationship of these considerations with the sustainability intent for the product being developed is taught and illustrated within this new edition. Illustrates the product design process roadmap from creation of the concept through implementation into manufacturing, highlighting steps and methods used throughout the process to limit risk and ensure success. Includes methods and design project management techniques used to ensure an efficient design process and successful manufacturing of the product or part.

Designing with Plastics

Designing with Plastics

Author: Gunter Erhard

Publisher: Carl Hanser Verlag GmbH Co KG

Published: 2013-03-18

Total Pages: 530

ISBN-13: 3446412824

DOWNLOAD EBOOK

"Designing with Plastics" is an indispensable tool for every engineer and designer working with plastic materials. It will assist in the development of plastic parts that are not only functional and esthetically pleasing but also manufacturable while meeting ever increasing end-use requirements. The short but concise introduction into the specific properties of this material class focuses on the practical needs of the designer and lays the foundation for the following in-depth discussion of part design suitable for production and the intended end-use application. Numerous detailed examples highlight practical tips and rules of thumb for successful part design. Content: - Structure and Properties - Properties of Generic Polymeric Materials - Physical Properties - Characteristic Values - Test Methods and Procedures - Geometrically Simple Structural Parts under Static Loads - Design and Material Considerations for Parts Subjected to Mechanical Loads - Designing for Production - Flexing Elements - Mechanical Fasteners - Ribbed Structures - Gear Wheels - Friction Bearings - Wheels and Rollers


Book Synopsis Designing with Plastics by : Gunter Erhard

Download or read book Designing with Plastics written by Gunter Erhard and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2013-03-18 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Designing with Plastics" is an indispensable tool for every engineer and designer working with plastic materials. It will assist in the development of plastic parts that are not only functional and esthetically pleasing but also manufacturable while meeting ever increasing end-use requirements. The short but concise introduction into the specific properties of this material class focuses on the practical needs of the designer and lays the foundation for the following in-depth discussion of part design suitable for production and the intended end-use application. Numerous detailed examples highlight practical tips and rules of thumb for successful part design. Content: - Structure and Properties - Properties of Generic Polymeric Materials - Physical Properties - Characteristic Values - Test Methods and Procedures - Geometrically Simple Structural Parts under Static Loads - Design and Material Considerations for Parts Subjected to Mechanical Loads - Designing for Production - Flexing Elements - Mechanical Fasteners - Ribbed Structures - Gear Wheels - Friction Bearings - Wheels and Rollers

Plastic Product Design

Plastic Product Design

Author: Ronald D. Beck

Publisher:

Published: 1980

Total Pages: 424

ISBN-13:

DOWNLOAD EBOOK


Book Synopsis Plastic Product Design by : Ronald D. Beck

Download or read book Plastic Product Design written by Ronald D. Beck and published by . This book was released on 1980 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Plastic Component Design

Plastic Component Design

Author: Paul D. Q. Campbell

Publisher: Industrial Press Inc.

Published: 1996

Total Pages: 266

ISBN-13: 9780831130657

DOWNLOAD EBOOK

This book is for the industrial designer interested in the applications of plastics in products and industry. It explains how different plastics are processed, and it contains extensive examples of common and unusual plastic components and products with an explanation of how they are manufactured. Every year, more products are being replaced or augmented by the same product made from plastic, and this trend has resulted in much debate about the effectiveness of plastic replacements. Today's plastics can be designed to operate in all weather conditions and chemical surroundings. They can be economically produced for short run part production or readily adapted to high quantity production, and they can be cut, glued, tapped, or machined by traditional methods to suit design needs. Explains how to choose the best processing method, what fastening or joining methods can be used, and how to use the characteristics of a plastic to judge its suitability for an application. Covers all major contemporary molding processes. Discusses, in detail, important topics such as surface finish and special effects.


Book Synopsis Plastic Component Design by : Paul D. Q. Campbell

Download or read book Plastic Component Design written by Paul D. Q. Campbell and published by Industrial Press Inc.. This book was released on 1996 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is for the industrial designer interested in the applications of plastics in products and industry. It explains how different plastics are processed, and it contains extensive examples of common and unusual plastic components and products with an explanation of how they are manufactured. Every year, more products are being replaced or augmented by the same product made from plastic, and this trend has resulted in much debate about the effectiveness of plastic replacements. Today's plastics can be designed to operate in all weather conditions and chemical surroundings. They can be economically produced for short run part production or readily adapted to high quantity production, and they can be cut, glued, tapped, or machined by traditional methods to suit design needs. Explains how to choose the best processing method, what fastening or joining methods can be used, and how to use the characteristics of a plastic to judge its suitability for an application. Covers all major contemporary molding processes. Discusses, in detail, important topics such as surface finish and special effects.

Design Formulas for Plastics Engineers

Design Formulas for Plastics Engineers

Author: Natti S. Rao

Publisher:

Published: 2004

Total Pages: 184

ISBN-13:

DOWNLOAD EBOOK

Although designing machines and dies for plastics processing is routinely done with the help of computer modeling and design programs, the results don't always hold up in industrial application. Therefore, it is essential for the designer to have an understanding of the underlying mathematical concepts and their limitations when working with these programs and/or trying to improve their output. This book presents a summary of the most important formulas and their applications to solve design and processing problems with plastics materials. Numerous practical examples guide the reader step-by-step through the computational routine of designing polymer machinery. The approach is unassuming and very practical to enable every engineer to apply these concepts in their daily work and improve their equipment and stabilize their processes. Contents: - Formulas of Rheology - Thermodynamic Properties - Formulas of Heat Transfer - Designing Plastics Parts - Designing Extrusion Equipment - Designing Injection Molding Equipment.


Book Synopsis Design Formulas for Plastics Engineers by : Natti S. Rao

Download or read book Design Formulas for Plastics Engineers written by Natti S. Rao and published by . This book was released on 2004 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although designing machines and dies for plastics processing is routinely done with the help of computer modeling and design programs, the results don't always hold up in industrial application. Therefore, it is essential for the designer to have an understanding of the underlying mathematical concepts and their limitations when working with these programs and/or trying to improve their output. This book presents a summary of the most important formulas and their applications to solve design and processing problems with plastics materials. Numerous practical examples guide the reader step-by-step through the computational routine of designing polymer machinery. The approach is unassuming and very practical to enable every engineer to apply these concepts in their daily work and improve their equipment and stabilize their processes. Contents: - Formulas of Rheology - Thermodynamic Properties - Formulas of Heat Transfer - Designing Plastics Parts - Designing Extrusion Equipment - Designing Injection Molding Equipment.

Plastics Product Design Engineering Handbook

Plastics Product Design Engineering Handbook

Author: Sidney Levy

Publisher: Springer Science & Business Media

Published: 2012-12-06

Total Pages: 346

ISBN-13: 1461325315

DOWNLOAD EBOOK

Plastics have become increasingly important in the products used in our society, ranging from housing to packaging, transportation, business machines and especially in medicine and health products. Designing plastic parts for this wide range of uses has become a major activity for designers, architects, engineers, and others who are concerned with product development. Because plastics are unique materials with a broad range of proper ties they are adaptable to a variety of uses. The uniqueness of plastics stems from their physical characteristics which are as different from metals, glasses, and ceramics as these materials are different from each other. One major concern is the design of structures to take loads. Metals as well as the other materials are assumed to respond elastically and to recover completely their original shape after the load is removed. Based on this simple fact, extensive litera ture on applied mechanics of materials has been developed to enable designers to predict accurately the performance of structures under load. Many engineers depend on such texts as Timoshenko's Strength of Materials as a guide to the performance of structures. Using this as a guide, generations of engineers have designed economical and safe structural parts. Unfortunately, these design principles must be modified when designing with plastics since they do not respond elastically to stress and undergo permanent deformation with sus tained loading.


Book Synopsis Plastics Product Design Engineering Handbook by : Sidney Levy

Download or read book Plastics Product Design Engineering Handbook written by Sidney Levy and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics have become increasingly important in the products used in our society, ranging from housing to packaging, transportation, business machines and especially in medicine and health products. Designing plastic parts for this wide range of uses has become a major activity for designers, architects, engineers, and others who are concerned with product development. Because plastics are unique materials with a broad range of proper ties they are adaptable to a variety of uses. The uniqueness of plastics stems from their physical characteristics which are as different from metals, glasses, and ceramics as these materials are different from each other. One major concern is the design of structures to take loads. Metals as well as the other materials are assumed to respond elastically and to recover completely their original shape after the load is removed. Based on this simple fact, extensive litera ture on applied mechanics of materials has been developed to enable designers to predict accurately the performance of structures under load. Many engineers depend on such texts as Timoshenko's Strength of Materials as a guide to the performance of structures. Using this as a guide, generations of engineers have designed economical and safe structural parts. Unfortunately, these design principles must be modified when designing with plastics since they do not respond elastically to stress and undergo permanent deformation with sus tained loading.