Download Engineering Geology And Geotechnics full books in PDF, epub, and Kindle. Read online Engineering Geology And Geotechnics ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Engineering Geology and Geotechnics discusses engineering survey methods. The book is comprised of 12 chapters that cover several concerns in engineering, such as building foundations, slopes, and construction materials. Chapter 1 covers site investigation, while Chapter 2 tackles geophysical exploration. Chapter 3 deals with slope and open excavation, while Chapter 4 discusses subsurface excavation. Foundation for buildings, reservoir, and dams and dam sites are also covered in the book. A chapter then tackles hydrogeology and underground water supply. The text also encompasses river and beach engineering. The last two chapters cover engineering seismology and construction materials. This book will be of great use to researchers, practitioners, and students of engineering.
Book Synopsis Engineering Geology and Geotechnics by : F. G. Bell
Download or read book Engineering Geology and Geotechnics written by F. G. Bell and published by Elsevier. This book was released on 2013-10-22 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Geology and Geotechnics discusses engineering survey methods. The book is comprised of 12 chapters that cover several concerns in engineering, such as building foundations, slopes, and construction materials. Chapter 1 covers site investigation, while Chapter 2 tackles geophysical exploration. Chapter 3 deals with slope and open excavation, while Chapter 4 discusses subsurface excavation. Foundation for buildings, reservoir, and dams and dam sites are also covered in the book. A chapter then tackles hydrogeology and underground water supply. The text also encompasses river and beach engineering. The last two chapters cover engineering seismology and construction materials. This book will be of great use to researchers, practitioners, and students of engineering.
Practical Engineering Geology provides an introduction to the way projects are managed, designed and constructed, and how the engineering geologist can contribute to cost- effective and safe project achievement. The need for a holistic view of geological materials, from soil to rock, and of geological history is emphasised. Chapters address key aspects of • Geology for engineering and ground modelling • Site investigation and testing of geological materials • Geotechnical parameters • Design of slopes, tunnels, foundations, and other engineering structures • Identifying hazards • Avoiding unexpected ground conditions This second edition includes a new chapter on environmental issues covering hydrogeology, considerations of climate change, earthquakes, and more. All chapters have been updated, with extensively revised figures throughout and several new case studies of unexpected ground conditions. The book will support practising engineering geologists and geotechnical engineers, as well as MSc level students of engineering geology and other geotechnical subjects.
Book Synopsis Practical Engineering Geology by : Steve Hencher
Download or read book Practical Engineering Geology written by Steve Hencher and published by CRC Press. This book was released on 2024-04-19 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical Engineering Geology provides an introduction to the way projects are managed, designed and constructed, and how the engineering geologist can contribute to cost- effective and safe project achievement. The need for a holistic view of geological materials, from soil to rock, and of geological history is emphasised. Chapters address key aspects of • Geology for engineering and ground modelling • Site investigation and testing of geological materials • Geotechnical parameters • Design of slopes, tunnels, foundations, and other engineering structures • Identifying hazards • Avoiding unexpected ground conditions This second edition includes a new chapter on environmental issues covering hydrogeology, considerations of climate change, earthquakes, and more. All chapters have been updated, with extensively revised figures throughout and several new case studies of unexpected ground conditions. The book will support practising engineering geologists and geotechnical engineers, as well as MSc level students of engineering geology and other geotechnical subjects.
The field of geoengineering is at a crossroads where the path to high-tech solutions meets the path to expanding applications of geotechnology. In this report, the term "geoengineering" includes all types of engineering that deal with Earth materials, such as geotechnical engineering, geological engineering, hydrological engineering, and Earth-related parts of petroleum engineering and mining engineering. The rapid expansion of nanotechnology, biotechnology, and information technology begs the question of how these new approaches might come to play in developing better solutions for geotechnological problems. This report presents a vision for the future of geotechnology aimed at National Science Foundation (NSF) program managers, the geological and geotechnical engineering community as a whole, and other interested parties, including Congress, federal and state agencies, industry, academia, and other stakeholders in geoengineering research. Some of the ideas may be close to reality whereas others may turn out to be elusive, but they all present possibilities to strive for and potential goals for the future. Geoengineers are poised to expand their roles and lead in finding solutions for modern Earth systems problems, such as global change, emissions-free energy supply, global water supply, and urban systems.
Book Synopsis Geological and Geotechnical Engineering in the New Millennium by : National Research Council
Download or read book Geological and Geotechnical Engineering in the New Millennium written by National Research Council and published by National Academies Press. This book was released on 2006-03-03 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of geoengineering is at a crossroads where the path to high-tech solutions meets the path to expanding applications of geotechnology. In this report, the term "geoengineering" includes all types of engineering that deal with Earth materials, such as geotechnical engineering, geological engineering, hydrological engineering, and Earth-related parts of petroleum engineering and mining engineering. The rapid expansion of nanotechnology, biotechnology, and information technology begs the question of how these new approaches might come to play in developing better solutions for geotechnological problems. This report presents a vision for the future of geotechnology aimed at National Science Foundation (NSF) program managers, the geological and geotechnical engineering community as a whole, and other interested parties, including Congress, federal and state agencies, industry, academia, and other stakeholders in geoengineering research. Some of the ideas may be close to reality whereas others may turn out to be elusive, but they all present possibilities to strive for and potential goals for the future. Geoengineers are poised to expand their roles and lead in finding solutions for modern Earth systems problems, such as global change, emissions-free energy supply, global water supply, and urban systems.
This book provides a comprehensive text on the geotechnical and geological aspects of the investigations for and the design and construction of new dams and the review and assessment of existing dams. The book provides dam engineers and geologists with a practical approach, and gives university students an insight into the subject of dam engineering. All phases of investigation, design and construction are covered, through to the preliminary and detailed design phases and ultimately the construction phase. This revised and expanded 2nd edition includes a lengthy new chapter on the assessment of the likelihood of failure of dams by internal erosion and piping.
Book Synopsis Geotechnical Engineering of Dams by : Robin Fell
Download or read book Geotechnical Engineering of Dams written by Robin Fell and published by CRC Press. This book was released on 2014-11-21 with total page 1374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive text on the geotechnical and geological aspects of the investigations for and the design and construction of new dams and the review and assessment of existing dams. The book provides dam engineers and geologists with a practical approach, and gives university students an insight into the subject of dam engineering. All phases of investigation, design and construction are covered, through to the preliminary and detailed design phases and ultimately the construction phase. This revised and expanded 2nd edition includes a lengthy new chapter on the assessment of the likelihood of failure of dams by internal erosion and piping.
Professionals and students in any geology-related field will find this an essential reference. It clearly and systematically explains underground engineering geology principles, methods, theories and case studies. The authors lay out engineering problems in underground rock engineering and how to study and solve them. The book specially emphasizes mechanical and hydraulic couplings in rock engineering for wellbore stability, mining near aquifers and other underground structures where inflow is a problem.
Book Synopsis Engineering Geology for Underground Rocks by : Suping Peng
Download or read book Engineering Geology for Underground Rocks written by Suping Peng and published by Springer Science & Business Media. This book was released on 2007-10-14 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Professionals and students in any geology-related field will find this an essential reference. It clearly and systematically explains underground engineering geology principles, methods, theories and case studies. The authors lay out engineering problems in underground rock engineering and how to study and solve them. The book specially emphasizes mechanical and hydraulic couplings in rock engineering for wellbore stability, mining near aquifers and other underground structures where inflow is a problem.
Bridges the Gap between Geology and Ground Engineering High-quality geological models are crucial for ground engineering projects, but many engineers are not always at ease with the geological terminology and analysis presented in these models, nor with their implications and limitations. Project engineers need to have a sound comprehension of the geological models presented to them, and to be able to discuss the models in so far as they might impinge on the design, safety and possible budgetary or time constraints of the project. They should also fully understand how site investigation data and samples are used to develop and substantiate geological models. Geology for Ground Engineering Projects provides a comprehensive presentation of, and insight into, the critical geological phenomena that may be encountered in many engineering projects, for example rock contact relationships, weathering and karst phenomena in tropical areas, composition of fault zones and variability of rock discontinuities. Examples are provided from around the world, including Southeast Asia, Europe, North and South America, China and India. Comprehensive and well-illustrated, this definitive book: Describes the important geological phenomena that could affect ground engineering projects Provides a practical knowledge-base for relevant geological processes Addresses common geological issues and concerns Rocks are described in relation to the environment of their formation, highlighting the variation in composition, distribution and geotechnical properties that can be expected within a variety of rock associations. Case studies, where geology has been a vital factor, are included. These are written by the project engineers or geologists responsible for the projects. Geology for Ground Engineering Projects is well illustrated with color diagrams and photographs. Readers are directed to satellite images of selected areas to explore for themselves many of the geological features described in this book.
Book Synopsis Geology for Ground Engineering Projects by : Chris J. N. Fletcher
Download or read book Geology for Ground Engineering Projects written by Chris J. N. Fletcher and published by CRC Press. This book was released on 2018-09-03 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridges the Gap between Geology and Ground Engineering High-quality geological models are crucial for ground engineering projects, but many engineers are not always at ease with the geological terminology and analysis presented in these models, nor with their implications and limitations. Project engineers need to have a sound comprehension of the geological models presented to them, and to be able to discuss the models in so far as they might impinge on the design, safety and possible budgetary or time constraints of the project. They should also fully understand how site investigation data and samples are used to develop and substantiate geological models. Geology for Ground Engineering Projects provides a comprehensive presentation of, and insight into, the critical geological phenomena that may be encountered in many engineering projects, for example rock contact relationships, weathering and karst phenomena in tropical areas, composition of fault zones and variability of rock discontinuities. Examples are provided from around the world, including Southeast Asia, Europe, North and South America, China and India. Comprehensive and well-illustrated, this definitive book: Describes the important geological phenomena that could affect ground engineering projects Provides a practical knowledge-base for relevant geological processes Addresses common geological issues and concerns Rocks are described in relation to the environment of their formation, highlighting the variation in composition, distribution and geotechnical properties that can be expected within a variety of rock associations. Case studies, where geology has been a vital factor, are included. These are written by the project engineers or geologists responsible for the projects. Geology for Ground Engineering Projects is well illustrated with color diagrams and photographs. Readers are directed to satellite images of selected areas to explore for themselves many of the geological features described in this book.
Book Synopsis Principles of Engineering Geology and Geotechnics by : Dimitri Pavlovitch Krynine
Download or read book Principles of Engineering Geology and Geotechnics written by Dimitri Pavlovitch Krynine and published by New York ; Toronto : McGraw-Hill. This book was released on 1957 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Book Synopsis Principles of Engineering Geology and Geotechnics: Geology Soil and Rock Mechanics and Other Earth Sciences as Used in Civil Engineering by : Krynine
Download or read book Principles of Engineering Geology and Geotechnics: Geology Soil and Rock Mechanics and Other Earth Sciences as Used in Civil Engineering written by Krynine and published by . This book was released on 1998 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt:
An Ideal Source for Geologists and Others with Little Background in Engineering or MechanicsPractical Rock Mechanics provides an introduction for graduate students as well as a reference guide for practicing engineering geologists and geotechnical engineers. The book considers fundamental geological processes that give rise to the nature of rock ma
Book Synopsis Practical Rock Mechanics by : Steve Hencher
Download or read book Practical Rock Mechanics written by Steve Hencher and published by CRC Press. This book was released on 2015-08-28 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Ideal Source for Geologists and Others with Little Background in Engineering or MechanicsPractical Rock Mechanics provides an introduction for graduate students as well as a reference guide for practicing engineering geologists and geotechnical engineers. The book considers fundamental geological processes that give rise to the nature of rock ma
Geology – Basics for Engineers (second edition) presents the physical and chemical characteristics of the Earth, the nature and the properties of rocks and unconsolidated deposits/sediments, the action of water, how the Earth is transformed by various phenomena at different scales of time and space. The book shows the engineer how to take geological conditions into account in their projects, and how to exploit a wide range of natural resources in an intelligent way, reduce geological hazards, and manage subsurface pollution. This second edition has been fully revised and updated. Through a problem-based learning approach, this instructional text imparts knowledge and practical experience to engineering students (undergraduate and graduate level), as well as to experts in the fields of civil engineering, environmental engineering, earth sciences, architecture, land and urban planning. Free digital supplements to the book, found on the book page, contain solutions to the problems and animations that show additional facets of the living Earth. The original French edition of the book (2007) won the prestigious Roberval Prize, an international contest organized by the University of Technology of Compiegne in collaboration with the General Council of Oise, France. Geology, Basics for Engineers was selected out of a total of 110 candidates. The jury praised the book as a "very well conceived teaching textbook" and underscored its highly didactic nature, as well as the excellent quality of its illustrations. Features: Offers an exhaustive outline of the methods and techniques used in geology, with a study of the nature and properties of the principal soils and rocks Helps students understand how geological conditions should be taken into account by the engineer by taking a problem-solving approach Contains extensive figures and examples, solutions to probems, and illustrative animations Presents a highly didactic and synthetic work intended for engineering students as well as experts in civil engineering, environmental engineering, the earth sciences, and architecture
Book Synopsis Geology by : Aurèle Parriaux
Download or read book Geology written by Aurèle Parriaux and published by CRC Press. This book was released on 2018-10-31 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geology – Basics for Engineers (second edition) presents the physical and chemical characteristics of the Earth, the nature and the properties of rocks and unconsolidated deposits/sediments, the action of water, how the Earth is transformed by various phenomena at different scales of time and space. The book shows the engineer how to take geological conditions into account in their projects, and how to exploit a wide range of natural resources in an intelligent way, reduce geological hazards, and manage subsurface pollution. This second edition has been fully revised and updated. Through a problem-based learning approach, this instructional text imparts knowledge and practical experience to engineering students (undergraduate and graduate level), as well as to experts in the fields of civil engineering, environmental engineering, earth sciences, architecture, land and urban planning. Free digital supplements to the book, found on the book page, contain solutions to the problems and animations that show additional facets of the living Earth. The original French edition of the book (2007) won the prestigious Roberval Prize, an international contest organized by the University of Technology of Compiegne in collaboration with the General Council of Oise, France. Geology, Basics for Engineers was selected out of a total of 110 candidates. The jury praised the book as a "very well conceived teaching textbook" and underscored its highly didactic nature, as well as the excellent quality of its illustrations. Features: Offers an exhaustive outline of the methods and techniques used in geology, with a study of the nature and properties of the principal soils and rocks Helps students understand how geological conditions should be taken into account by the engineer by taking a problem-solving approach Contains extensive figures and examples, solutions to probems, and illustrative animations Presents a highly didactic and synthetic work intended for engineering students as well as experts in civil engineering, environmental engineering, the earth sciences, and architecture
