Geotechnical Design and Practice

Geotechnical Design and Practice

Author: K. Ilamparuthi

Publisher: Springer

Published: 2018-06-27

Total Pages: 261

ISBN-13: 9811305056

DOWNLOAD EBOOK

This book presents articles covering a wide spectrum of topics in geotechnical engineering, including properties of soils, unsaturated soil mechanics, ground improvement, liquefaction and seismic studies, soil-structure interaction and stability analysis of man-made and natural slopes. The contributing authors are renowned researchers in their respective fields, which include soft ground improvement, seismic response of retaining structure using soil-structure Interaction (SSI) principles, and unsaturated soils. Based on keynote addresses and invited talks presented at the Indian Geotechnical Conference 2016, this book will prove a valuable resource for practicing engineers and researchers in the field of geotechnical engineering.


Book Synopsis Geotechnical Design and Practice by : K. Ilamparuthi

Download or read book Geotechnical Design and Practice written by K. Ilamparuthi and published by Springer. This book was released on 2018-06-27 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents articles covering a wide spectrum of topics in geotechnical engineering, including properties of soils, unsaturated soil mechanics, ground improvement, liquefaction and seismic studies, soil-structure interaction and stability analysis of man-made and natural slopes. The contributing authors are renowned researchers in their respective fields, which include soft ground improvement, seismic response of retaining structure using soil-structure Interaction (SSI) principles, and unsaturated soils. Based on keynote addresses and invited talks presented at the Indian Geotechnical Conference 2016, this book will prove a valuable resource for practicing engineers and researchers in the field of geotechnical engineering.

Modern Geotechnical Design Codes of Practice

Modern Geotechnical Design Codes of Practice

Author: Patrick Arnold

Publisher: IOS Press

Published: 2013

Total Pages: 340

ISBN-13: 1614991626

DOWNLOAD EBOOK

The ground is one of the most highly variable of engineering materials. It is therefore not surprising that geotechnical designs depend on local site conditions and local engineering experience. Engineering practices, relating to investigation and design methods site understanding and to safety levels acceptable to society, will therefore vary between different regions.The challenge in geotechnical engineering is to make use of worldwide geotechnical experience, established over many years, to aid in the development and harmonization of geotechnical design codes. Given the significant uncertainties involved, empiricism and engineering


Book Synopsis Modern Geotechnical Design Codes of Practice by : Patrick Arnold

Download or read book Modern Geotechnical Design Codes of Practice written by Patrick Arnold and published by IOS Press. This book was released on 2013 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ground is one of the most highly variable of engineering materials. It is therefore not surprising that geotechnical designs depend on local site conditions and local engineering experience. Engineering practices, relating to investigation and design methods site understanding and to safety levels acceptable to society, will therefore vary between different regions.The challenge in geotechnical engineering is to make use of worldwide geotechnical experience, established over many years, to aid in the development and harmonization of geotechnical design codes. Given the significant uncertainties involved, empiricism and engineering

Geotechnical Design to Eurocode 7

Geotechnical Design to Eurocode 7

Author: Trevor L.L. Orr

Publisher: Springer Science & Business Media

Published: 2012-12-06

Total Pages: 174

ISBN-13: 1447108035

DOWNLOAD EBOOK

The purpose of this book is to explain the philosophy set out in Eurocode 7, the new European code of practice for geotechnical design, and, by means of series of typical examples, to show how this philosophy is used in practice. This book is aimed at: • practising engineers, to assist them to carry out geotechnical designs to Eurocode 7 using the limit state design method and partial factors; • lecturers and students on courses where design to Eurocode 7 is being taught. It is envisaged that practising engineers, using this book to assist them carry out geotechnical designs to Eurocode 7, will have access to the prestandard version of Eurocode 7, ENV 1997 -I, so the authors have concentrated on the main principles and have not provided a commentary on all the clauses. However sufficient detail has been included in the book to enable it to be used on its own by those learning the design principles who may not have access to Eurocode 7. For example, the values of the partial factors and the principal equations given in Eurocode 7 have been included and these are used in the design examples in this book. To assist the reader, the numbering, layout and titles of the chapters closely follow those presented in Eurocode 7.


Book Synopsis Geotechnical Design to Eurocode 7 by : Trevor L.L. Orr

Download or read book Geotechnical Design to Eurocode 7 written by Trevor L.L. Orr and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to explain the philosophy set out in Eurocode 7, the new European code of practice for geotechnical design, and, by means of series of typical examples, to show how this philosophy is used in practice. This book is aimed at: • practising engineers, to assist them to carry out geotechnical designs to Eurocode 7 using the limit state design method and partial factors; • lecturers and students on courses where design to Eurocode 7 is being taught. It is envisaged that practising engineers, using this book to assist them carry out geotechnical designs to Eurocode 7, will have access to the prestandard version of Eurocode 7, ENV 1997 -I, so the authors have concentrated on the main principles and have not provided a commentary on all the clauses. However sufficient detail has been included in the book to enable it to be used on its own by those learning the design principles who may not have access to Eurocode 7. For example, the values of the partial factors and the principal equations given in Eurocode 7 have been included and these are used in the design examples in this book. To assist the reader, the numbering, layout and titles of the chapters closely follow those presented in Eurocode 7.

Geotechnical Engineering State of the Art and Practice

Geotechnical Engineering State of the Art and Practice

Author: Kyle M. Rollins

Publisher: Amer Society of Civil Engineers

Published: 2012

Total Pages: 832

ISBN-13: 9780784412138

DOWNLOAD EBOOK

"Sponsored by the Geo-Institute of the American Society of Civil Engineers."


Book Synopsis Geotechnical Engineering State of the Art and Practice by : Kyle M. Rollins

Download or read book Geotechnical Engineering State of the Art and Practice written by Kyle M. Rollins and published by Amer Society of Civil Engineers. This book was released on 2012 with total page 832 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Sponsored by the Geo-Institute of the American Society of Civil Engineers."

Geotechnical Engineering

Geotechnical Engineering

Author: Richard L. Handy

Publisher: McGraw Hill Professional

Published: 2007-01-26

Total Pages: 933

ISBN-13: 0071508716

DOWNLOAD EBOOK

Master the Latest Developments in Soil Testing and New Applications of Geotechnical Engineering Geotechnical Engineering: Principles and Practices offers students and practicing engineers a concise, easy-to-understand approach to the principles and methods of soil and geotechnical engineering. This updated classic builds from basic principles of soil mechanics and applies them to new topics, including mechanically stabilized earth (MSE), and intermediate foundations. This Fifth Edition features: Over 400 detailed illustrations and photographs Unique background material on the geological, pedological, and mineralogical aspects of soils with emphasis on clay mineralogy, soil structure, and expansive and collapsible soils. New coverage of mechanically stabilized earth (MSE); intermediate foundations; in-situ soil testing: statistical analysis of data; “FORE,” a scientific method for analyzing settlement; writing the geotechnical report; and the geotechnical engineer as a sleuth and expert witness. Get Quick Access to Every Soil and Geotechnical Engineering Topic • Igneous Rocks as Ultimate Sources for Soils • The Soil Profile • Soil Minerals • Particle Size and Gradation • Soil Fabric and Soil Structure • Soil Density and Unit Weight • Soil Water • Soil Consistency and Engineering Classification • Compaction • Seepage • Stress Distribution • Settlement • Shear Strength • Lateral Stress and Retaining Walls • MSE Walls and Soil Nailing • Slope Stability, Landslides, Embankments, and Earth Dams • Bearing Capacity of Shallow Foundations • Deep Foundations • Intermediate Foundations • Loads on Pipes • In-Situ Testing • Introduction to Soil Dynamics • The Geotechnical Report


Book Synopsis Geotechnical Engineering by : Richard L. Handy

Download or read book Geotechnical Engineering written by Richard L. Handy and published by McGraw Hill Professional. This book was released on 2007-01-26 with total page 933 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master the Latest Developments in Soil Testing and New Applications of Geotechnical Engineering Geotechnical Engineering: Principles and Practices offers students and practicing engineers a concise, easy-to-understand approach to the principles and methods of soil and geotechnical engineering. This updated classic builds from basic principles of soil mechanics and applies them to new topics, including mechanically stabilized earth (MSE), and intermediate foundations. This Fifth Edition features: Over 400 detailed illustrations and photographs Unique background material on the geological, pedological, and mineralogical aspects of soils with emphasis on clay mineralogy, soil structure, and expansive and collapsible soils. New coverage of mechanically stabilized earth (MSE); intermediate foundations; in-situ soil testing: statistical analysis of data; “FORE,” a scientific method for analyzing settlement; writing the geotechnical report; and the geotechnical engineer as a sleuth and expert witness. Get Quick Access to Every Soil and Geotechnical Engineering Topic • Igneous Rocks as Ultimate Sources for Soils • The Soil Profile • Soil Minerals • Particle Size and Gradation • Soil Fabric and Soil Structure • Soil Density and Unit Weight • Soil Water • Soil Consistency and Engineering Classification • Compaction • Seepage • Stress Distribution • Settlement • Shear Strength • Lateral Stress and Retaining Walls • MSE Walls and Soil Nailing • Slope Stability, Landslides, Embankments, and Earth Dams • Bearing Capacity of Shallow Foundations • Deep Foundations • Intermediate Foundations • Loads on Pipes • In-Situ Testing • Introduction to Soil Dynamics • The Geotechnical Report

Handbook of Geotechnical Investigation and Design Tables

Handbook of Geotechnical Investigation and Design Tables

Author: Burt G. Look

Publisher: CRC Press

Published: 2007-04-26

Total Pages: 356

ISBN-13: 020394660X

DOWNLOAD EBOOK

This practical handbook of properties for soils and rock contains, in a concise tabular format, the key issues relevant to geotechnical investigations, assessments and designs in common practice. In addition, there are brief notes on the application of the tables. These data tables are compiled for experienced geotechnical professionals who require a reference document to access key information. There is an extensive database of correlations for different applications. The book should provide a useful bridge between soil and rock mechanics theory and its application to practical engineering solutions. The initial chapters deal with the planning of the geotechnical investigation, the classification of the soil and rock properties and some of the more used testing is then covered. Later chapters show the reliability and correlations that are used to convert that data in the interpretative and assessment phase of the project. The final chapters apply some of these concepts to geotechnical design. This book is intended primarily for practicing geotechnical engineers working in investigation, assessment and design, but should provide a useful supplement for postgraduate courses.


Book Synopsis Handbook of Geotechnical Investigation and Design Tables by : Burt G. Look

Download or read book Handbook of Geotechnical Investigation and Design Tables written by Burt G. Look and published by CRC Press. This book was released on 2007-04-26 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical handbook of properties for soils and rock contains, in a concise tabular format, the key issues relevant to geotechnical investigations, assessments and designs in common practice. In addition, there are brief notes on the application of the tables. These data tables are compiled for experienced geotechnical professionals who require a reference document to access key information. There is an extensive database of correlations for different applications. The book should provide a useful bridge between soil and rock mechanics theory and its application to practical engineering solutions. The initial chapters deal with the planning of the geotechnical investigation, the classification of the soil and rock properties and some of the more used testing is then covered. Later chapters show the reliability and correlations that are used to convert that data in the interpretative and assessment phase of the project. The final chapters apply some of these concepts to geotechnical design. This book is intended primarily for practicing geotechnical engineers working in investigation, assessment and design, but should provide a useful supplement for postgraduate courses.

Sound Geotechnical Research to Practice

Sound Geotechnical Research to Practice

Author: Robert D. Holtz

Publisher:

Published: 2013

Total Pages: 0

ISBN-13: 9780784412770

DOWNLOAD EBOOK

GSP 230 contains 39 papers on applied geotechnical engineering in soft ground construction, reinforced soils, and fundamental soil behavior presented in honor of Robert D. Holtz.


Book Synopsis Sound Geotechnical Research to Practice by : Robert D. Holtz

Download or read book Sound Geotechnical Research to Practice written by Robert D. Holtz and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: GSP 230 contains 39 papers on applied geotechnical engineering in soft ground construction, reinforced soils, and fundamental soil behavior presented in honor of Robert D. Holtz.

Technology and Practice in Geotechnical Engineering

Technology and Practice in Geotechnical Engineering

Author: Adeyeri, Joseph B.

Publisher: IGI Global

Published: 2014-09-30

Total Pages: 854

ISBN-13: 1466665068

DOWNLOAD EBOOK

Knowledge surrounding the behavior of earth materials is important to a number of industries, including the mining and construction industries. Further research into the field of geotechnical engineering can assist in providing the tools necessary to analyze the condition and properties of the earth. Technology and Practice in Geotechnical Engineering brings together theory and practical application, thus offering a unified and thorough understanding of soil mechanics. Highlighting illustrative examples, technological applications, and theoretical and foundational concepts, this book is a crucial reference source for students, practitioners, contractors, architects, and builders interested in the functions and mechanics of sedimentary materials.


Book Synopsis Technology and Practice in Geotechnical Engineering by : Adeyeri, Joseph B.

Download or read book Technology and Practice in Geotechnical Engineering written by Adeyeri, Joseph B. and published by IGI Global. This book was released on 2014-09-30 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt: Knowledge surrounding the behavior of earth materials is important to a number of industries, including the mining and construction industries. Further research into the field of geotechnical engineering can assist in providing the tools necessary to analyze the condition and properties of the earth. Technology and Practice in Geotechnical Engineering brings together theory and practical application, thus offering a unified and thorough understanding of soil mechanics. Highlighting illustrative examples, technological applications, and theoretical and foundational concepts, this book is a crucial reference source for students, practitioners, contractors, architects, and builders interested in the functions and mechanics of sedimentary materials.

From Research to Practice in Geotechnical Engineering

From Research to Practice in Geotechnical Engineering

Author: James E. Laier

Publisher: ASCE Publications

Published: 2008

Total Pages: 704

ISBN-13:

DOWNLOAD EBOOK

From Research to Practice in Geotechnical Engineering, GSP 180, honors Dr. John H. Schmertmann, Professor Emeritus and P.E., for his contributions to civil engineering. It begins with his biography, a list of his students and writings, followed by reprints of his selection of 16 representative papers from his career. Twenty-eight new, mostly invited papers follow on a great variety of subjects, including: the installation and testing of piles; pile-structure interaction; liquefaction and its mitigation; case histories of settlement and landslide mitigation and capping a superfund landfill; and computer modeling. The authors include six members of the National Academy of Engineering. This GSP concludes with a paper by one of these, Dr. Schmertmann, which itself concludes with a suggestion for improving your technical writing. Everyone working in the geotechnical profession will find something interesting and useful herein.


Book Synopsis From Research to Practice in Geotechnical Engineering by : James E. Laier

Download or read book From Research to Practice in Geotechnical Engineering written by James E. Laier and published by ASCE Publications. This book was released on 2008 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: From Research to Practice in Geotechnical Engineering, GSP 180, honors Dr. John H. Schmertmann, Professor Emeritus and P.E., for his contributions to civil engineering. It begins with his biography, a list of his students and writings, followed by reprints of his selection of 16 representative papers from his career. Twenty-eight new, mostly invited papers follow on a great variety of subjects, including: the installation and testing of piles; pile-structure interaction; liquefaction and its mitigation; case histories of settlement and landslide mitigation and capping a superfund landfill; and computer modeling. The authors include six members of the National Academy of Engineering. This GSP concludes with a paper by one of these, Dr. Schmertmann, which itself concludes with a suggestion for improving your technical writing. Everyone working in the geotechnical profession will find something interesting and useful herein.

Geotechnical Engineering Design

Geotechnical Engineering Design

Author: Ming Xiao

Publisher: John Wiley & Sons

Published: 2015-05-26

Total Pages: 436

ISBN-13: 0470632232

DOWNLOAD EBOOK

An accessible, clear, concise, and contemporary course in geotechnical engineering design. covers the major in geotechnical engineering packed with self-test problems and projects with an on-line detailed solutions manual presents the state-of-the-art field practice covers both Eurocode 7 and ASTM standards (for the US)


Book Synopsis Geotechnical Engineering Design by : Ming Xiao

Download or read book Geotechnical Engineering Design written by Ming Xiao and published by John Wiley & Sons. This book was released on 2015-05-26 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: An accessible, clear, concise, and contemporary course in geotechnical engineering design. covers the major in geotechnical engineering packed with self-test problems and projects with an on-line detailed solutions manual presents the state-of-the-art field practice covers both Eurocode 7 and ASTM standards (for the US)