Guidance, Control and Docking for CubeSat-based Active Debris Removal

Guidance, Control and Docking for CubeSat-based Active Debris Removal

Author: Mohamed Khalil Ben-Larbi

Publisher: Cuvillier Verlag

Published: 2023-08-07

Total Pages: 223

ISBN-13: 3736968485

DOWNLOAD EBOOK

While a paradigm shift in space industry has already started involving “mass production” of higher standardized, large distributed systems such as constellations, there are no effective solutions existing for the “mass removal” of satellites. Many indicators point to a further increase in the space traffic in Earth orbit in the near future, which could imply new dynamics in the evolution of the space debris environment. Even in case of diligent compliance with the Inter-Agency Space Debris Coordination Committee (IADC) mitigation guidelines, the growth in space traffic complicates its management and drastically increases the probability of accidents and system failures. NASA scientist Donald J. Kessler proposed a scenario in which the density of objects in low Earth orbit is high enough that collisions between objects could cause a cascade that renders space unusable for many generations. Therefore, a reliable and affordable capability of removing or servicing non-functional objects is essential to guarantee sustainable access to Earth orbit. Recently, the CubeSat design standard introduced a new class of cost-efficient small spacecraft and thereby offers a potential solution to the active debris removal (ADR) problem. The development of a novel “CubeSat-compatible” ADR technology has significant advantages such as the use of commercial off-the-shelf parts, reduced launch cost, and reduced design efforts. This thesis presents –in the frame of an ADR mission– an approach to advanced rendezvous and docking with non-cooperative targets via CubeSat. It covers the design process of simulation systems used for verification purposes, the ideation and implementation of novel guidance, control, and docking techniques, as well as their verification and evaluation. The outcome of this research is a series of validated software tools, processes, technical devices, and algorithms for automated approach and docking, that have been tested in simulation and with prototype hardware.


Book Synopsis Guidance, Control and Docking for CubeSat-based Active Debris Removal by : Mohamed Khalil Ben-Larbi

Download or read book Guidance, Control and Docking for CubeSat-based Active Debris Removal written by Mohamed Khalil Ben-Larbi and published by Cuvillier Verlag. This book was released on 2023-08-07 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: While a paradigm shift in space industry has already started involving “mass production” of higher standardized, large distributed systems such as constellations, there are no effective solutions existing for the “mass removal” of satellites. Many indicators point to a further increase in the space traffic in Earth orbit in the near future, which could imply new dynamics in the evolution of the space debris environment. Even in case of diligent compliance with the Inter-Agency Space Debris Coordination Committee (IADC) mitigation guidelines, the growth in space traffic complicates its management and drastically increases the probability of accidents and system failures. NASA scientist Donald J. Kessler proposed a scenario in which the density of objects in low Earth orbit is high enough that collisions between objects could cause a cascade that renders space unusable for many generations. Therefore, a reliable and affordable capability of removing or servicing non-functional objects is essential to guarantee sustainable access to Earth orbit. Recently, the CubeSat design standard introduced a new class of cost-efficient small spacecraft and thereby offers a potential solution to the active debris removal (ADR) problem. The development of a novel “CubeSat-compatible” ADR technology has significant advantages such as the use of commercial off-the-shelf parts, reduced launch cost, and reduced design efforts. This thesis presents –in the frame of an ADR mission– an approach to advanced rendezvous and docking with non-cooperative targets via CubeSat. It covers the design process of simulation systems used for verification purposes, the ideation and implementation of novel guidance, control, and docking techniques, as well as their verification and evaluation. The outcome of this research is a series of validated software tools, processes, technical devices, and algorithms for automated approach and docking, that have been tested in simulation and with prototype hardware.

Space Safety is No Accident

Space Safety is No Accident

Author: Tommaso Sgobba

Publisher: Springer

Published: 2015-06-04

Total Pages: 640

ISBN-13: 3319159828

DOWNLOAD EBOOK

Includes the proceedings from the 7th IAASS Conference, "Space Safety is No Accident," held in Friedrichshafen, Germany, in October 2014. The 7th IAASS Conference, “Space Safety is No Accident” is an invitation to reflect and exchange information on a number of topics in space safety and sustainability of national and international interest. The conference is also a forum to promote mutual understanding, trust and the widest possible international cooperation in such matters. The once exclusive “club” of nations with autonomous sub-orbital and orbital space access capabilities is becoming crowded with fresh and ambitious new entrants. New commercial spaceports are starting operations and others are being built. In the manned spaceflight arena a commercial market is becoming a tangible reality with suborbital spaceflights and government use of commercial services for cargo and crew transportation to orbit. Besides the national ambitions in space, the international cooperation both civil and commercial is also gaining momentum. In the meantime robotic space exploration will accelerate and with it the need to internationally better regulate the usage of nuclear power sources. Space-bound systems and aviation traffic will share more and more a crowded airspace, while aviation will increasingly rely on space-based safety-critical services. Finally, most nations own nowadays space assets, mainly satellites of various kinds and purposes, which are under the constant threat of collision with other spacecraft and with the ever increasing number of space debris. Awareness is increasing internationally (as solemnly declared since decades in space treaties) that space is a mankind asset and that we all have the duty of caring for it. Without proactive and courageous international initiatives to organize space, we risk to negate access and use of space to future generations.


Book Synopsis Space Safety is No Accident by : Tommaso Sgobba

Download or read book Space Safety is No Accident written by Tommaso Sgobba and published by Springer. This book was released on 2015-06-04 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes the proceedings from the 7th IAASS Conference, "Space Safety is No Accident," held in Friedrichshafen, Germany, in October 2014. The 7th IAASS Conference, “Space Safety is No Accident” is an invitation to reflect and exchange information on a number of topics in space safety and sustainability of national and international interest. The conference is also a forum to promote mutual understanding, trust and the widest possible international cooperation in such matters. The once exclusive “club” of nations with autonomous sub-orbital and orbital space access capabilities is becoming crowded with fresh and ambitious new entrants. New commercial spaceports are starting operations and others are being built. In the manned spaceflight arena a commercial market is becoming a tangible reality with suborbital spaceflights and government use of commercial services for cargo and crew transportation to orbit. Besides the national ambitions in space, the international cooperation both civil and commercial is also gaining momentum. In the meantime robotic space exploration will accelerate and with it the need to internationally better regulate the usage of nuclear power sources. Space-bound systems and aviation traffic will share more and more a crowded airspace, while aviation will increasingly rely on space-based safety-critical services. Finally, most nations own nowadays space assets, mainly satellites of various kinds and purposes, which are under the constant threat of collision with other spacecraft and with the ever increasing number of space debris. Awareness is increasing internationally (as solemnly declared since decades in space treaties) that space is a mankind asset and that we all have the duty of caring for it. Without proactive and courageous international initiatives to organize space, we risk to negate access and use of space to future generations.

Automated Rendezvous and Docking of Spacecraft

Automated Rendezvous and Docking of Spacecraft

Author: Wigbert Fehse

Publisher: Cambridge University Press

Published: 2003-11-13

Total Pages: 517

ISBN-13: 1139440683

DOWNLOAD EBOOK

The definitive reference for space engineers on rendezvous and docking/berthing (RVD/B) related issues, this book answers key questions such as: How does the docking vehicle accurately approach the target spacecraft? What technology is needed aboard the spacecraft to perform automatic rendezvous and docking, and what systems are required by ground control to supervise this process? How can the proper functioning of all rendezvous-related equipment, systems and operations be verified before launch? The book provides an overview of the major issues governing approach and mating strategies, and system concepts for rendezvous and docking/berthing. These issues are described and explained such that aerospace engineers, students and even newcomers to the field can acquire a basic understanding of RVD/B. The author would like to extend his thanks to Dr Shufan Wu, GNC specialist and translator of the book's Chinese edition, for his help in the compilation of these important errata.


Book Synopsis Automated Rendezvous and Docking of Spacecraft by : Wigbert Fehse

Download or read book Automated Rendezvous and Docking of Spacecraft written by Wigbert Fehse and published by Cambridge University Press. This book was released on 2003-11-13 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive reference for space engineers on rendezvous and docking/berthing (RVD/B) related issues, this book answers key questions such as: How does the docking vehicle accurately approach the target spacecraft? What technology is needed aboard the spacecraft to perform automatic rendezvous and docking, and what systems are required by ground control to supervise this process? How can the proper functioning of all rendezvous-related equipment, systems and operations be verified before launch? The book provides an overview of the major issues governing approach and mating strategies, and system concepts for rendezvous and docking/berthing. These issues are described and explained such that aerospace engineers, students and even newcomers to the field can acquire a basic understanding of RVD/B. The author would like to extend his thanks to Dr Shufan Wu, GNC specialist and translator of the book's Chinese edition, for his help in the compilation of these important errata.

Next Generation CubeSats and SmallSats

Next Generation CubeSats and SmallSats

Author: Francesco Branz

Publisher: Elsevier

Published: 2023-08-24

Total Pages: 838

ISBN-13: 0128245425

DOWNLOAD EBOOK

Next Generation of CubeSats and SmallSats: Enabling Technologies, Missions, and Markets provides a comprehensive understanding of the small and medium sized satellite approach and its potentialities and limitations. The book analyzes promising applications (e.g., constellations and distributed systems, small science platforms that overachieve relative to their development time and cost) as paradigm-shifting solutions for space exploitation, with an analysis of market statistics and trends and a prediction of where the technologies, and consequently, the field is heading in the next decade. The book also provides a thorough analysis of CubeSat potentialities and applications, and addresses unique technical approaches and systems strategies. Throughout key sections (introduction and background, technology details, systems, applications, and future prospects), the book provides basic design tools scaled to the small satellite problem, assesses the technological state-of-the-art, and describes the most recent advancements with a look to the near future. This new book is for aerospace engineering professionals, advanced students, and designers seeking a broad view of the CubeSat world with a brief historical background, strategies, applications, mission scenarios, new challenges and upcoming advances. Presents a comprehensive and systematic view of the technologies and space missions related to nanosats and smallsats Discusses next generation technologies, up-coming advancements and future perspectives Features the most relevant CubeSat launch initiatives from NASA, ESA, and from developing countries, along with an overview of the New Space CubeSat market


Book Synopsis Next Generation CubeSats and SmallSats by : Francesco Branz

Download or read book Next Generation CubeSats and SmallSats written by Francesco Branz and published by Elsevier. This book was released on 2023-08-24 with total page 838 pages. Available in PDF, EPUB and Kindle. Book excerpt: Next Generation of CubeSats and SmallSats: Enabling Technologies, Missions, and Markets provides a comprehensive understanding of the small and medium sized satellite approach and its potentialities and limitations. The book analyzes promising applications (e.g., constellations and distributed systems, small science platforms that overachieve relative to their development time and cost) as paradigm-shifting solutions for space exploitation, with an analysis of market statistics and trends and a prediction of where the technologies, and consequently, the field is heading in the next decade. The book also provides a thorough analysis of CubeSat potentialities and applications, and addresses unique technical approaches and systems strategies. Throughout key sections (introduction and background, technology details, systems, applications, and future prospects), the book provides basic design tools scaled to the small satellite problem, assesses the technological state-of-the-art, and describes the most recent advancements with a look to the near future. This new book is for aerospace engineering professionals, advanced students, and designers seeking a broad view of the CubeSat world with a brief historical background, strategies, applications, mission scenarios, new challenges and upcoming advances. Presents a comprehensive and systematic view of the technologies and space missions related to nanosats and smallsats Discusses next generation technologies, up-coming advancements and future perspectives Features the most relevant CubeSat launch initiatives from NASA, ESA, and from developing countries, along with an overview of the New Space CubeSat market

Guidance and Control of a Spacecraft to Rendevous and Dock with a Non-cooperative Target

Guidance and Control of a Spacecraft to Rendevous and Dock with a Non-cooperative Target

Author: Anantha Sayanam Komanduri

Publisher: Cuvillier Verlag

Published: 2011-11-22

Total Pages: 210

ISBN-13: 3736939450

DOWNLOAD EBOOK

Non-cooperative spacecrafts are those current or future assets in orbit which have lost their control authority in one or more degrees of freedom and cannot convey any information concerning their position, attitude or rates to facilitate Rendezvous and Docking/Berthing (RVD/B) process. A growing field of study in space research is to develop On-Orbit Servicing (OOS) technology capable of dealing with these space- crafts, called targets, which are designed without any intention to be serviced. To render services such as repair, refuel or removal of the target from orbit, the chaser spacecraft should exhibit sophisticated RVD/B technology for formation fly and final stage docking/berthing operations of the mission. Assuming that the terminal capture operations of the target are to be performed by a suitable manipulator system on-board chaser, this study relies upon proven technology and outlines guidance and control methodologies to achieve rendezvous during proximity phases. The entry gate of chaser after phasing can be defined at a distance of about 5 km in ± V-bar direction from the target in its orbit. To account for errors in modeling, navigation or actuation, proximity range operations from the entry gate are decomposed into three different subphases as far range, inspection or fly around and closer approach. From the entry gate and along the path of the chaser two hold points are defined: first to initiate an inspection and the second, which is close to the safe zone defined around the target, to initiate a capture. The chaser is assumed to perform a station keeping maneuver at the second hold point until initial conditions for the capture are met. Possible scenarios pertaining to the behavior of the target in a circular orbit are considered and guidance schemes for different subphases are presented using a combination of Hill-Clohessy-Willtshire (HCW) solution, elliptical fly around, glides- lope algorithm etc. Relative controllers both for position and attitude of the chaser are also presented. A Linear Quadratic (LQ) controller for relative position and a Proportional Integral Derivative (PID) controller for relative attitude with angular velocity constraints are chosen to track down the error to achieve rendezvous and attitude synchronization with the non-cooperative target. A comparative analysis between different guidance trajectories for important parameters such as time, fuel usage, minimum absolute distance and the maximum radial distance from the target is presented. Verification of the proposed guidance and control methods is done by applying them to two different case studies: the first study incorporating a stabilized target in Geostationary Earth Orbit (GEO) and the second, with a spinning target in Low Earth Orbit (LEO). The methods presented here are general and provide a simulator to the chaser to perform rendezvous analysis with non-cooperative targets. To achieve RVD/B, the study proposes a careful combination of guidance solutions for different phases of proximity operations, and for different scenario’s of the target encountered by the chaser.


Book Synopsis Guidance and Control of a Spacecraft to Rendevous and Dock with a Non-cooperative Target by : Anantha Sayanam Komanduri

Download or read book Guidance and Control of a Spacecraft to Rendevous and Dock with a Non-cooperative Target written by Anantha Sayanam Komanduri and published by Cuvillier Verlag. This book was released on 2011-11-22 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-cooperative spacecrafts are those current or future assets in orbit which have lost their control authority in one or more degrees of freedom and cannot convey any information concerning their position, attitude or rates to facilitate Rendezvous and Docking/Berthing (RVD/B) process. A growing field of study in space research is to develop On-Orbit Servicing (OOS) technology capable of dealing with these space- crafts, called targets, which are designed without any intention to be serviced. To render services such as repair, refuel or removal of the target from orbit, the chaser spacecraft should exhibit sophisticated RVD/B technology for formation fly and final stage docking/berthing operations of the mission. Assuming that the terminal capture operations of the target are to be performed by a suitable manipulator system on-board chaser, this study relies upon proven technology and outlines guidance and control methodologies to achieve rendezvous during proximity phases. The entry gate of chaser after phasing can be defined at a distance of about 5 km in ± V-bar direction from the target in its orbit. To account for errors in modeling, navigation or actuation, proximity range operations from the entry gate are decomposed into three different subphases as far range, inspection or fly around and closer approach. From the entry gate and along the path of the chaser two hold points are defined: first to initiate an inspection and the second, which is close to the safe zone defined around the target, to initiate a capture. The chaser is assumed to perform a station keeping maneuver at the second hold point until initial conditions for the capture are met. Possible scenarios pertaining to the behavior of the target in a circular orbit are considered and guidance schemes for different subphases are presented using a combination of Hill-Clohessy-Willtshire (HCW) solution, elliptical fly around, glides- lope algorithm etc. Relative controllers both for position and attitude of the chaser are also presented. A Linear Quadratic (LQ) controller for relative position and a Proportional Integral Derivative (PID) controller for relative attitude with angular velocity constraints are chosen to track down the error to achieve rendezvous and attitude synchronization with the non-cooperative target. A comparative analysis between different guidance trajectories for important parameters such as time, fuel usage, minimum absolute distance and the maximum radial distance from the target is presented. Verification of the proposed guidance and control methods is done by applying them to two different case studies: the first study incorporating a stabilized target in Geostationary Earth Orbit (GEO) and the second, with a spinning target in Low Earth Orbit (LEO). The methods presented here are general and provide a simulator to the chaser to perform rendezvous analysis with non-cooperative targets. To achieve RVD/B, the study proposes a careful combination of guidance solutions for different phases of proximity operations, and for different scenario’s of the target encountered by the chaser.

Fundamentals of Spacecraft Attitude Determination and Control

Fundamentals of Spacecraft Attitude Determination and Control

Author: F. Landis Markley

Publisher: Springer

Published: 2014-05-31

Total Pages: 486

ISBN-13: 1493908022

DOWNLOAD EBOOK

This book explores topics that are central to the field of spacecraft attitude determination and control. The authors provide rigorous theoretical derivations of significant algorithms accompanied by a generous amount of qualitative discussions of the subject matter. The book documents the development of the important concepts and methods in a manner accessible to practicing engineers, graduate-level engineering students and applied mathematicians. It includes detailed examples from actual mission designs to help ease the transition from theory to practice and also provides prototype algorithms that are readily available on the author’s website. Subject matter includes both theoretical derivations and practical implementation of spacecraft attitude determination and control systems. It provides detailed derivations for attitude kinematics and dynamics and provides detailed description of the most widely used attitude parameterization, the quaternion. This title also provides a thorough treatise of attitude dynamics including Jacobian elliptical functions. It is the first known book to provide detailed derivations and explanations of state attitude determination and gives readers real-world examples from actual working spacecraft missions. The subject matter is chosen to fill the void of existing textbooks and treatises, especially in state and dynamics attitude determination. MATLAB code of all examples will be provided through an external website.


Book Synopsis Fundamentals of Spacecraft Attitude Determination and Control by : F. Landis Markley

Download or read book Fundamentals of Spacecraft Attitude Determination and Control written by F. Landis Markley and published by Springer. This book was released on 2014-05-31 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores topics that are central to the field of spacecraft attitude determination and control. The authors provide rigorous theoretical derivations of significant algorithms accompanied by a generous amount of qualitative discussions of the subject matter. The book documents the development of the important concepts and methods in a manner accessible to practicing engineers, graduate-level engineering students and applied mathematicians. It includes detailed examples from actual mission designs to help ease the transition from theory to practice and also provides prototype algorithms that are readily available on the author’s website. Subject matter includes both theoretical derivations and practical implementation of spacecraft attitude determination and control systems. It provides detailed derivations for attitude kinematics and dynamics and provides detailed description of the most widely used attitude parameterization, the quaternion. This title also provides a thorough treatise of attitude dynamics including Jacobian elliptical functions. It is the first known book to provide detailed derivations and explanations of state attitude determination and gives readers real-world examples from actual working spacecraft missions. The subject matter is chosen to fill the void of existing textbooks and treatises, especially in state and dynamics attitude determination. MATLAB code of all examples will be provided through an external website.

Orbital Mechanics for Engineering Students

Orbital Mechanics for Engineering Students

Author: Howard D Curtis

Publisher: Elsevier

Published: 2009-10-26

Total Pages: 744

ISBN-13: 0080887848

DOWNLOAD EBOOK

Orbital Mechanics for Engineering Students, Second Edition, provides an introduction to the basic concepts of space mechanics. These include vector kinematics in three dimensions; Newton’s laws of motion and gravitation; relative motion; the vector-based solution of the classical two-body problem; derivation of Kepler’s equations; orbits in three dimensions; preliminary orbit determination; and orbital maneuvers. The book also covers relative motion and the two-impulse rendezvous problem; interplanetary mission design using patched conics; rigid-body dynamics used to characterize the attitude of a space vehicle; satellite attitude dynamics; and the characteristics and design of multi-stage launch vehicles. Each chapter begins with an outline of key concepts and concludes with problems that are based on the material covered. This text is written for undergraduates who are studying orbital mechanics for the first time and have completed courses in physics, dynamics, and mathematics, including differential equations and applied linear algebra. Graduate students, researchers, and experienced practitioners will also find useful review materials in the book. NEW: Reorganized and improved discusions of coordinate systems, new discussion on perturbations and quarternions NEW: Increased coverage of attitude dynamics, including new Matlab algorithms and examples in chapter 10 New examples and homework problems


Book Synopsis Orbital Mechanics for Engineering Students by : Howard D Curtis

Download or read book Orbital Mechanics for Engineering Students written by Howard D Curtis and published by Elsevier. This book was released on 2009-10-26 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Orbital Mechanics for Engineering Students, Second Edition, provides an introduction to the basic concepts of space mechanics. These include vector kinematics in three dimensions; Newton’s laws of motion and gravitation; relative motion; the vector-based solution of the classical two-body problem; derivation of Kepler’s equations; orbits in three dimensions; preliminary orbit determination; and orbital maneuvers. The book also covers relative motion and the two-impulse rendezvous problem; interplanetary mission design using patched conics; rigid-body dynamics used to characterize the attitude of a space vehicle; satellite attitude dynamics; and the characteristics and design of multi-stage launch vehicles. Each chapter begins with an outline of key concepts and concludes with problems that are based on the material covered. This text is written for undergraduates who are studying orbital mechanics for the first time and have completed courses in physics, dynamics, and mathematics, including differential equations and applied linear algebra. Graduate students, researchers, and experienced practitioners will also find useful review materials in the book. NEW: Reorganized and improved discusions of coordinate systems, new discussion on perturbations and quarternions NEW: Increased coverage of attitude dynamics, including new Matlab algorithms and examples in chapter 10 New examples and homework problems

Guidance and Control of a Spacecraft to Rendevous and Dock with a Non-cooperative Target

Guidance and Control of a Spacecraft to Rendevous and Dock with a Non-cooperative Target

Author: Ananth S. Komanduri

Publisher:

Published: 2011

Total Pages: 206

ISBN-13: 9783869559452

DOWNLOAD EBOOK


Book Synopsis Guidance and Control of a Spacecraft to Rendevous and Dock with a Non-cooperative Target by : Ananth S. Komanduri

Download or read book Guidance and Control of a Spacecraft to Rendevous and Dock with a Non-cooperative Target written by Ananth S. Komanduri and published by . This book was released on 2011 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Optimal Estimation of Dynamic Systems

Optimal Estimation of Dynamic Systems

Author: John L. Crassidis

Publisher: CRC Press

Published: 2004-04-27

Total Pages: 606

ISBN-13: 1135439273

DOWNLOAD EBOOK

Most newcomers to the field of linear stochastic estimation go through a difficult process in understanding and applying the theory.This book minimizes the process while introducing the fundamentals of optimal estimation. Optimal Estimation of Dynamic Systems explores topics that are important in the field of control where the signals received are used to determine highly sensitive processes such as the flight path of a plane, the orbit of a space vehicle, or the control of a machine. The authors use dynamic models from mechanical and aerospace engineering to provide immediate results of estimation concepts with a minimal reliance on mathematical skills. The book documents the development of the central concepts and methods of optimal estimation theory in a manner accessible to engineering students, applied mathematicians, and practicing engineers. It includes rigorous theoretial derivations and a significant amount of qualitiative discussion and judgements. It also presents prototype algorithms, giving detail and discussion to stimulate development of efficient computer programs and intelligent use of them. This book illustrates the application of optimal estimation methods to problems with varying degrees of analytical and numercial difficulty. It compares various approaches to help develop a feel for the absolute and relative utility of different methods, and provides many applications in the fields of aerospace, mechanical, and electrical engineering.


Book Synopsis Optimal Estimation of Dynamic Systems by : John L. Crassidis

Download or read book Optimal Estimation of Dynamic Systems written by John L. Crassidis and published by CRC Press. This book was released on 2004-04-27 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most newcomers to the field of linear stochastic estimation go through a difficult process in understanding and applying the theory.This book minimizes the process while introducing the fundamentals of optimal estimation. Optimal Estimation of Dynamic Systems explores topics that are important in the field of control where the signals received are used to determine highly sensitive processes such as the flight path of a plane, the orbit of a space vehicle, or the control of a machine. The authors use dynamic models from mechanical and aerospace engineering to provide immediate results of estimation concepts with a minimal reliance on mathematical skills. The book documents the development of the central concepts and methods of optimal estimation theory in a manner accessible to engineering students, applied mathematicians, and practicing engineers. It includes rigorous theoretial derivations and a significant amount of qualitiative discussion and judgements. It also presents prototype algorithms, giving detail and discussion to stimulate development of efficient computer programs and intelligent use of them. This book illustrates the application of optimal estimation methods to problems with varying degrees of analytical and numercial difficulty. It compares various approaches to help develop a feel for the absolute and relative utility of different methods, and provides many applications in the fields of aerospace, mechanical, and electrical engineering.

Handbook of Small Satellites

Handbook of Small Satellites

Author: Joseph N. Pelton

Publisher: Springer

Published: 2020-09-13

Total Pages: 0

ISBN-13: 9783030363079

DOWNLOAD EBOOK

In the past decade, the field of small satellites has expanded the space industry in a powerful way. Hundreds, indeed thousands, of these innovative and highly cost-efficient satellites are now being launched from Earth to establish low-cost space systems. These smallsats are engaged in experiments and prototype testing, communications services, data relay, internet access, remote sensing, defense and security related services, and more. Some of these systems are quite small and are simple student experiments, while others in commercial constellations are employing state-of-the-art technologies to deliver fast and accurate services. This handbook provides a comprehensive overview of this exciting new field. It covers the technology, applications and services, design and manufacture, launch arrangements, ground systems, and economic and regulatory arrangements surrounding small satellites. The diversity of approach in recent years has allowed for rapid innovation and economic breakthroughs to proceed at a pace that seems only to be speeding up. In this reference work, readers will find information pertaining to all aspects of the small satellite industry, written by a host of international experts in the field.


Book Synopsis Handbook of Small Satellites by : Joseph N. Pelton

Download or read book Handbook of Small Satellites written by Joseph N. Pelton and published by Springer. This book was released on 2020-09-13 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past decade, the field of small satellites has expanded the space industry in a powerful way. Hundreds, indeed thousands, of these innovative and highly cost-efficient satellites are now being launched from Earth to establish low-cost space systems. These smallsats are engaged in experiments and prototype testing, communications services, data relay, internet access, remote sensing, defense and security related services, and more. Some of these systems are quite small and are simple student experiments, while others in commercial constellations are employing state-of-the-art technologies to deliver fast and accurate services. This handbook provides a comprehensive overview of this exciting new field. It covers the technology, applications and services, design and manufacture, launch arrangements, ground systems, and economic and regulatory arrangements surrounding small satellites. The diversity of approach in recent years has allowed for rapid innovation and economic breakthroughs to proceed at a pace that seems only to be speeding up. In this reference work, readers will find information pertaining to all aspects of the small satellite industry, written by a host of international experts in the field.