Ifip Glossary Of Terms Used In Production Control eBook Download PDF

Download Ifip Glossary Of Terms Used In Production Control full books in PDF, epub, and Kindle. Read online Ifip Glossary Of Terms Used In Production Control ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!

IFIP Glossary of Terms Used in Production Control

Author: J.L. Burbidge

Publisher: Elsevier

Published: 2012-12-02

Total Pages: 124

ISBN-13: 0444596534

DOWNLOAD EBOOK

There is at present no universally accepted source giving definitions in English of the principal terms used in Production Control and in closely related areas. Most of the dictionaries and glossaries which do exist in this field fail to cover the full range of ideas which need to be considered during an intelligent discussion of the subject. Definitions given in different sources for Production Control terms differ not only in wording, but also in many cases in the concepts which they cover.The IFIP Glossary is intended to meet this perceived need, the immediate audience for the book being IFIP WG 5.7, the working group concerned with the automation of Production Management and other related subjects.The Glossary is organised in the following way: - The subject field was classified into sub-fields by Management function. - Each of these sub-fields was analysed to discover the main concepts with which it is concerned. - Terms were selected for each concept, using as far as possible terms which are already in common use. - Definitions were selected or written for each term.This approach of starting with subject classification is believed to be new in the field of production.Care has been taken to check the Glossary with the APICS dictionary (USA), and with British standards. Notes are included in Part 2 to explain the reasons for selecting a particular meaning for a term, in those cases where there are wide differences in the meanings chosen by different sources.Some consensus about the meaning of words is essential for communication. On the other hand, there is a danger that if the accepted framework of meanings is too rigid, if may hinder the future development of the discipline. It is hoped that a reasonable balance has been found between these conflicting influences. The Glossary should be useful not only to WG 5.7 members, but also to Engineers and Academics in all countries where a knowledge of English is important to industrial development.

Book Synopsis IFIP Glossary of Terms Used in Production Control by : J.L. Burbidge

Download or read book IFIP Glossary of Terms Used in Production Control written by J.L. Burbidge and published by Elsevier. This book was released on 2012-12-02 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is at present no universally accepted source giving definitions in English of the principal terms used in Production Control and in closely related areas. Most of the dictionaries and glossaries which do exist in this field fail to cover the full range of ideas which need to be considered during an intelligent discussion of the subject. Definitions given in different sources for Production Control terms differ not only in wording, but also in many cases in the concepts which they cover.The IFIP Glossary is intended to meet this perceived need, the immediate audience for the book being IFIP WG 5.7, the working group concerned with the automation of Production Management and other related subjects.The Glossary is organised in the following way: - The subject field was classified into sub-fields by Management function. - Each of these sub-fields was analysed to discover the main concepts with which it is concerned. - Terms were selected for each concept, using as far as possible terms which are already in common use. - Definitions were selected or written for each term.This approach of starting with subject classification is believed to be new in the field of production.Care has been taken to check the Glossary with the APICS dictionary (USA), and with British standards. Notes are included in Part 2 to explain the reasons for selecting a particular meaning for a term, in those cases where there are wide differences in the meanings chosen by different sources.Some consensus about the meaning of words is essential for communication. On the other hand, there is a danger that if the accepted framework of meanings is too rigid, if may hinder the future development of the discipline. It is hoped that a reasonable balance has been found between these conflicting influences. The Glossary should be useful not only to WG 5.7 members, but also to Engineers and Academics in all countries where a knowledge of English is important to industrial development.

Computer-Aided Production Management

Author: Asbjorn Rolstadas

Publisher: Springer Science & Business Media

Published: 2012-12-06

Total Pages: 393

ISBN-13: 3642733182

DOWNLOAD EBOOK

The purpose of this book is to discuss the state of the art and future trends in the field of computerized production management systems. It is composed of a number of independent papers, each presented in a chapter. Some of the widely recognized experts in the field around the world have been asked to contribute. lowe each of them my sincere gratitude for their kind cooperation. I am also grateful to Peter Falster and Jim Browne for their kind support in helping me to review topics to be covered and to select the authors. This book is a result of the professional work done in the International Federation of Information Processing Technical Committee IFIP TC5 "Com puter Applications in Technology" and especially in the Working Group WG5. 7 "Computer-Aided Production Management". This group was established in 1978 with the aim of promoting and encouraging the advancement of the field of computer systems for the production management of manufacturing, off shore, construction, electronic and similar and related industries. The scope of the work includes, but is not limited to, the following topics: 1) design and implementation of new production planning and control systems taking into account new technology and management philosophy; 2) CAPM in a CIM environment including interfaces to CAD and CAM; 3) project management and cost engineering; 4) knowledge engineering in CAPM; 5) CAPM for Flexible Manufacturing Systems (FMS) and Flexible Assembly Systems (F AS); 6) methods and concepts in CAPM; 7) economic and social implications of CAPM.

Book Synopsis Computer-Aided Production Management by : Asbjorn Rolstadas

Download or read book Computer-Aided Production Management written by Asbjorn Rolstadas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to discuss the state of the art and future trends in the field of computerized production management systems. It is composed of a number of independent papers, each presented in a chapter. Some of the widely recognized experts in the field around the world have been asked to contribute. lowe each of them my sincere gratitude for their kind cooperation. I am also grateful to Peter Falster and Jim Browne for their kind support in helping me to review topics to be covered and to select the authors. This book is a result of the professional work done in the International Federation of Information Processing Technical Committee IFIP TC5 "Com puter Applications in Technology" and especially in the Working Group WG5. 7 "Computer-Aided Production Management". This group was established in 1978 with the aim of promoting and encouraging the advancement of the field of computer systems for the production management of manufacturing, off shore, construction, electronic and similar and related industries. The scope of the work includes, but is not limited to, the following topics: 1) design and implementation of new production planning and control systems taking into account new technology and management philosophy; 2) CAPM in a CIM environment including interfaces to CAD and CAM; 3) project management and cost engineering; 4) knowledge engineering in CAPM; 5) CAPM for Flexible Manufacturing Systems (FMS) and Flexible Assembly Systems (F AS); 6) methods and concepts in CAPM; 7) economic and social implications of CAPM.

Databases for Production Management

Author: R. Companys

Publisher: Elsevier

Published: 2012-12-02

Total Pages: 373

ISBN-13: 0444598782

DOWNLOAD EBOOK

Dealing with many aspects of the design, implementation and operation of databases for production management systems, this book presents research that is important to all those presently concerned with the computerisation of production management.

Book Synopsis Databases for Production Management by : R. Companys

Download or read book Databases for Production Management written by R. Companys and published by Elsevier. This book was released on 2012-12-02 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dealing with many aspects of the design, implementation and operation of databases for production management systems, this book presents research that is important to all those presently concerned with the computerisation of production management.

Group Technology and Cellular Manufacturing

Author: Nallan C. Suresh

Publisher: Springer Science & Business Media

Published: 2012-12-06

Total Pages: 560

ISBN-13: 1461554675

DOWNLOAD EBOOK

Group Technology and Cellular Manufacturing (GT/CM) have been widely-researched areas in the past 15 years and much progress has been made in all branches of GT/CM. Resulting from this research activity has been a proliferation of techniques for part-machine grouping, engineering data bases, expert system-based design methods for identifying part families, new analytical and simulation tools for evaluating performance of cells, new types of cell incorporating robotics and flexible automation, team-based approaches for organizing the work force and much more; however, the field lacks a careful compilation of this research and its outcomes. The editors of this book have commissioned leading researchers and implementers to prepare specific treatments of topics for their special areas of expertise in this broad-based philosophy of manufacturing. The editors have sought to be global both in coverage of topic matters and contributors. Group Technology and Cellular Manufacturing addresses the needs and interests of three groups of individuals in the manufacturing field: academic researchers, industry practitioners, and students. (1) The book provides an up-to-date perspective, incorporating the advances made in GT/CM during the past 15 years. As a natural extension to this research, it synthesizes the latest industry practices and outcomes to guide research to greater real-world relevance. (2) The book makes clear the foundations of GT/CM from the core elements of new developments which are aimed at reducing developmental and manufacturing lead times, costs, and at improving business quality and performance. (3) Finally, the book can be used as a textbook for graduate students in engineering and management for studying the field of Group Technology and Cellular Manufacturing.

Book Synopsis Group Technology and Cellular Manufacturing by : Nallan C. Suresh

Download or read book Group Technology and Cellular Manufacturing written by Nallan C. Suresh and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Group Technology and Cellular Manufacturing (GT/CM) have been widely-researched areas in the past 15 years and much progress has been made in all branches of GT/CM. Resulting from this research activity has been a proliferation of techniques for part-machine grouping, engineering data bases, expert system-based design methods for identifying part families, new analytical and simulation tools for evaluating performance of cells, new types of cell incorporating robotics and flexible automation, team-based approaches for organizing the work force and much more; however, the field lacks a careful compilation of this research and its outcomes. The editors of this book have commissioned leading researchers and implementers to prepare specific treatments of topics for their special areas of expertise in this broad-based philosophy of manufacturing. The editors have sought to be global both in coverage of topic matters and contributors. Group Technology and Cellular Manufacturing addresses the needs and interests of three groups of individuals in the manufacturing field: academic researchers, industry practitioners, and students. (1) The book provides an up-to-date perspective, incorporating the advances made in GT/CM during the past 15 years. As a natural extension to this research, it synthesizes the latest industry practices and outcomes to guide research to greater real-world relevance. (2) The book makes clear the foundations of GT/CM from the core elements of new developments which are aimed at reducing developmental and manufacturing lead times, costs, and at improving business quality and performance. (3) Finally, the book can be used as a textbook for graduate students in engineering and management for studying the field of Group Technology and Cellular Manufacturing.

Mass Production Processes

Author: Anil Akdogan

Publisher: BoD – Books on Demand

Published: 2020-03-11

Total Pages: 214

ISBN-13: 1838802150

DOWNLOAD EBOOK

It is always hard to set manufacturing systems to produce large quantities of standardized parts. Controlling these mass production lines needs deep knowledge, hard experience, and the required related tools as well. The use of modern methods and techniques to produce a large quantity of products within productive manufacturing processes provides improvements in manufacturing costs and product quality. In order to serve these purposes, this book aims to reflect on the advanced manufacturing systems of different alloys in production with related components and automation technologies. Additionally, it focuses on mass production processes designed according to Industry 4.0 considering different kinds of quality and improvement works in mass production systems for high productive and sustainable manufacturing. This book may be interesting to researchers, industrial employees, or any other partners who work for better quality manufacturing at any stage of the mass production processes.

Book Synopsis Mass Production Processes by : Anil Akdogan

Download or read book Mass Production Processes written by Anil Akdogan and published by BoD – Books on Demand. This book was released on 2020-03-11 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is always hard to set manufacturing systems to produce large quantities of standardized parts. Controlling these mass production lines needs deep knowledge, hard experience, and the required related tools as well. The use of modern methods and techniques to produce a large quantity of products within productive manufacturing processes provides improvements in manufacturing costs and product quality. In order to serve these purposes, this book aims to reflect on the advanced manufacturing systems of different alloys in production with related components and automation technologies. Additionally, it focuses on mass production processes designed according to Industry 4.0 considering different kinds of quality and improvement works in mass production systems for high productive and sustainable manufacturing. This book may be interesting to researchers, industrial employees, or any other partners who work for better quality manufacturing at any stage of the mass production processes.

Virtual Enterprise Integration: Technological and Organizational Perspectives

Author: Putnik, Goran D.

Publisher: IGI Global

Published: 2005-01-31

Total Pages: 454

ISBN-13: 159140407X

DOWNLOAD EBOOK

Virtual Enterprise Integration: Technological and Organizational Perspectives addresses the emergent research and development issues for the most-advanced enterprise organizational paradigm of today's world - the virtual enterprise paradigm. Virtual Enterprise Integration: Technological and Organizational Perspectives integrates the contributions by renowned international researchers and scientists and is virtually the first book focusing solely on the problem of virtual enterprise integration. This book is a guide that gives readers a broader perspective of VE integration requirements and raises their awareness on which technology and how technology can serve the needs of an expanding and increasingly competitive organizational model.

Book Synopsis Virtual Enterprise Integration: Technological and Organizational Perspectives by : Putnik, Goran D.

Download or read book Virtual Enterprise Integration: Technological and Organizational Perspectives written by Putnik, Goran D. and published by IGI Global. This book was released on 2005-01-31 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Virtual Enterprise Integration: Technological and Organizational Perspectives addresses the emergent research and development issues for the most-advanced enterprise organizational paradigm of today's world - the virtual enterprise paradigm. Virtual Enterprise Integration: Technological and Organizational Perspectives integrates the contributions by renowned international researchers and scientists and is virtually the first book focusing solely on the problem of virtual enterprise integration. This book is a guide that gives readers a broader perspective of VE integration requirements and raises their awareness on which technology and how technology can serve the needs of an expanding and increasingly competitive organizational model.

Glossary of Production Planning and Control Terms

Author: British Standards Institution

Publisher:

Published: 1975

Total Pages: 35

ISBN-13: 9780580085727

DOWNLOAD EBOOK

Book Synopsis Glossary of Production Planning and Control Terms by : British Standards Institution

Download or read book Glossary of Production Planning and Control Terms written by British Standards Institution and published by . This book was released on 1975 with total page 35 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Information Sources in Information Technology

Author: David Haynes

Publisher: Walter de Gruyter

Published: 2013-02-07

Total Pages: 368

ISBN-13: 3110976498

DOWNLOAD EBOOK

The aim of each volume of this series Guides to Information Sources is to reduce the time which needs to be spent on patient searching and to recommend the best starting point and sources most likely to yield the desired information. The criteria for selection provide a way into a subject to those new to the field and assists in identifying major new or possibly unexplored sources to those who already have some acquaintance with it. The series attempts to achieve evaluation through a careful selection of sources and through the comments provided on those sources.

Book Synopsis Information Sources in Information Technology by : David Haynes

Download or read book Information Sources in Information Technology written by David Haynes and published by Walter de Gruyter. This book was released on 2013-02-07 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of each volume of this series Guides to Information Sources is to reduce the time which needs to be spent on patient searching and to recommend the best starting point and sources most likely to yield the desired information. The criteria for selection provide a way into a subject to those new to the field and assists in identifying major new or possibly unexplored sources to those who already have some acquaintance with it. The series attempts to achieve evaluation through a careful selection of sources and through the comments provided on those sources.

Walford's Guide to Reference Material: Social and historical sciences, philosophy and religion

Author: Albert John Walford

Publisher: London : Library Association Publishing

Published: 1996

Total Pages: 1168

ISBN-13:

DOWNLOAD EBOOK

This new edition of Volume II (last published in 1994) has been extensively expanded and revised in all areas. Fully updated, the new edition includes major changes and covers a span of topics from archaeology through medieval history to statistics. It includes philosophy, psychology, religion, social sciences, geography, biology and history. All areas have been completely updated with additional material in economics, business and management.

Book Synopsis Walford's Guide to Reference Material: Social and historical sciences, philosophy and religion by : Albert John Walford

Download or read book Walford's Guide to Reference Material: Social and historical sciences, philosophy and religion written by Albert John Walford and published by London : Library Association Publishing. This book was released on 1996 with total page 1168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of Volume II (last published in 1994) has been extensively expanded and revised in all areas. Fully updated, the new edition includes major changes and covers a span of topics from archaeology through medieval history to statistics. It includes philosophy, psychology, religion, social sciences, geography, biology and history. All areas have been completely updated with additional material in economics, business and management.

International Books in Print

Author:

Publisher:

Published: 1998

Total Pages: 1484

ISBN-13:

DOWNLOAD EBOOK

Book Synopsis International Books in Print by :

Download or read book International Books in Print written by and published by . This book was released on 1998 with total page 1484 pages. Available in PDF, EPUB and Kindle. Book excerpt: