Download Intermetallics And Superalloys full books in PDF, epub, and Kindle. Read online Intermetallics And Superalloys ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Intermetallics are now close to the commercial application stage. TiAl-based alloys show good high-temperature specific stiffness and strength, while other intermetallics, such as the iron aluminides and silicide-based materials, are especially attractive due to their good corrosion or oxidation resistance. This book reviews activities that relate to improvements in processing methods and advances in the understanding of the property/microstructure relationship.
Book Synopsis Euromat 99, Intermetallics and Superalloys by : S. Naka
Download or read book Euromat 99, Intermetallics and Superalloys written by S. Naka and published by Wiley-VCH. This book was released on 2000-08-15 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intermetallics are now close to the commercial application stage. TiAl-based alloys show good high-temperature specific stiffness and strength, while other intermetallics, such as the iron aluminides and silicide-based materials, are especially attractive due to their good corrosion or oxidation resistance. This book reviews activities that relate to improvements in processing methods and advances in the understanding of the property/microstructure relationship.
Brazing processes offer enhanced control, adaptability and cost-efficiency in the joining of materials. Unsurprisingly, this has lead to great interest and investment in the area. Drawing on important research in the field, Advances in brazing provides a clear guide to the principles, materials, methods and key applications of brazing. Part one introduces the fundamentals of brazing, including molten metal wetting processes, strength and margins of safety of brazed joints, and modeling of associated physical phenomena. Part two goes on to consider specific materials, such as super alloys, filler metals for high temperature brazing, diamonds and cubic boron nitride, and varied ceramics and intermetallics. The brazing of carbon-carbon (C/C) composites to metals is also explored before applications of brazing and brazed materials are discussed in part three. Brazing of cutting materials, use of coating techniques, and metal-nonmetal brazing for electrical, packaging and structural applications are reviewed, along with fluxless brazing, the use of glasses and glass ceramics for high temperature applications and nickel-based filler metals for components in contact with drinking water. With its distinguished editor and international team of expert contributors, Advances in brazing is a technical guide for any professionals requiring an understanding of brazing processes, and offers a deeper understanding of the subject to researchers and engineers within the field of joining. Reviews the advances of brazing processes in joining materials Discusses the fundamentals of brazing and considers specific materials, including super alloys, filler metals, ceramics and intermetallics Brazing of cutting materials and structural applications are also discussed
Book Synopsis Advances in Brazing by : Dušan P Sekulić
Download or read book Advances in Brazing written by Dušan P Sekulić and published by Elsevier. This book was released on 2013-03-04 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brazing processes offer enhanced control, adaptability and cost-efficiency in the joining of materials. Unsurprisingly, this has lead to great interest and investment in the area. Drawing on important research in the field, Advances in brazing provides a clear guide to the principles, materials, methods and key applications of brazing. Part one introduces the fundamentals of brazing, including molten metal wetting processes, strength and margins of safety of brazed joints, and modeling of associated physical phenomena. Part two goes on to consider specific materials, such as super alloys, filler metals for high temperature brazing, diamonds and cubic boron nitride, and varied ceramics and intermetallics. The brazing of carbon-carbon (C/C) composites to metals is also explored before applications of brazing and brazed materials are discussed in part three. Brazing of cutting materials, use of coating techniques, and metal-nonmetal brazing for electrical, packaging and structural applications are reviewed, along with fluxless brazing, the use of glasses and glass ceramics for high temperature applications and nickel-based filler metals for components in contact with drinking water. With its distinguished editor and international team of expert contributors, Advances in brazing is a technical guide for any professionals requiring an understanding of brazing processes, and offers a deeper understanding of the subject to researchers and engineers within the field of joining. Reviews the advances of brazing processes in joining materials Discusses the fundamentals of brazing and considers specific materials, including super alloys, filler metals, ceramics and intermetallics Brazing of cutting materials and structural applications are also discussed
Superalloys form a class of the structural materials for high-temperature applications. Nickel superalloys are extensively used in the high-temperature components of gas turbines due to their excellent creep, fatigue, and corrosion resistance at elevated temperatures. These materials are considered paramagnetic in the range of working temperatures. This book presents the features of the ternary phase diagrams Ni-Al-X (X = {Co, Fe, Nb, Ti, Cr}), effects of the alloying on the long-range order and mechanical properties of the Ni3 Al-based alloys. Description of the strain-induced ferromagnetism in the Ni3Al-based alloys and magnetic control of the failure of gas turbine blades are also included. A separate section is devoted to the analysis of the vibration process and strength change in the single-crystal gas turbine blades. This book includes the review of the new intermetallic cobalt superalloys. The structure, crystal lattice parameters, orientation relationships between phases, mechanical and magnetic properties of the Co3(Al,W)-based alloys are described. Non-destructive magnetic point control of the martensite content in low-magnetic austenitic alloys is a new method for detection of the local sites with internal stresses. This method is useful for the detection of the residual stress in the critical parts of industrial products. This book may be useful for specialists in material science, first-year postgraduate students taking a class in material science and engineering, and engineers developing new alloys for the gas turbine technology.
Book Synopsis Superalloys by : Nataliya V. Kazantseva
Download or read book Superalloys written by Nataliya V. Kazantseva and published by CRC Press. This book was released on 2018-12-07 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superalloys form a class of the structural materials for high-temperature applications. Nickel superalloys are extensively used in the high-temperature components of gas turbines due to their excellent creep, fatigue, and corrosion resistance at elevated temperatures. These materials are considered paramagnetic in the range of working temperatures. This book presents the features of the ternary phase diagrams Ni-Al-X (X = {Co, Fe, Nb, Ti, Cr}), effects of the alloying on the long-range order and mechanical properties of the Ni3 Al-based alloys. Description of the strain-induced ferromagnetism in the Ni3Al-based alloys and magnetic control of the failure of gas turbine blades are also included. A separate section is devoted to the analysis of the vibration process and strength change in the single-crystal gas turbine blades. This book includes the review of the new intermetallic cobalt superalloys. The structure, crystal lattice parameters, orientation relationships between phases, mechanical and magnetic properties of the Co3(Al,W)-based alloys are described. Non-destructive magnetic point control of the martensite content in low-magnetic austenitic alloys is a new method for detection of the local sites with internal stresses. This method is useful for the detection of the residual stress in the critical parts of industrial products. This book may be useful for specialists in material science, first-year postgraduate students taking a class in material science and engineering, and engineers developing new alloys for the gas turbine technology.
Intermetallics are now close to the commercial application stage. TiAl-based alloys show good high-temperature specific stiffness and strength, while other intermetallics, such as the iron aluminides and silicide-based materials, are especially attractive due to their good corrosion or oxidation resistance. This book reviews activities that relate to improvements in processing methods and advances in the understanding of the property/microstructure relationship.
Book Synopsis Euromat 99, Intermetallics and Superalloys by : D. G. Morris
Download or read book Euromat 99, Intermetallics and Superalloys written by D. G. Morris and published by Wiley-VCH. This book was released on 2000 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intermetallics are now close to the commercial application stage. TiAl-based alloys show good high-temperature specific stiffness and strength, while other intermetallics, such as the iron aluminides and silicide-based materials, are especially attractive due to their good corrosion or oxidation resistance. This book reviews activities that relate to improvements in processing methods and advances in the understanding of the property/microstructure relationship.
Derived from the highly acclaimed series Materials Science and Technology, this book covers the properties as well as the present and emerging applications of intermetallics. Mechanical characteristics, microstructure as well as the environmental influence on intermetallics are treated in depth. In addition, the prospects and risks inherent in materials development as well as typical applications of intermetallics are critically assessed. It is the author's aim to provide the basis for understanding the physical mechanisms, which influence the properties of the materials and ultimately their areas of application. Materials covered include: Titanium Aluminides and Related Phases * Nickel Aluminides and Related Phases * Iron Aluminides and Related Phases * Cu-Base Phases * A15 Phases * Laves Phases * Rare-Earth Compound * Beryllides * Silicides Intermetallics is a valuable source of information for researchers and graduate students working in materials science, metallurgy, condensed-matter physics, and engineering.
Book Synopsis Intermetallics by : Gerhard Sauthoff
Download or read book Intermetallics written by Gerhard Sauthoff and published by John Wiley & Sons. This book was released on 2008-07-11 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: Derived from the highly acclaimed series Materials Science and Technology, this book covers the properties as well as the present and emerging applications of intermetallics. Mechanical characteristics, microstructure as well as the environmental influence on intermetallics are treated in depth. In addition, the prospects and risks inherent in materials development as well as typical applications of intermetallics are critically assessed. It is the author's aim to provide the basis for understanding the physical mechanisms, which influence the properties of the materials and ultimately their areas of application. Materials covered include: Titanium Aluminides and Related Phases * Nickel Aluminides and Related Phases * Iron Aluminides and Related Phases * Cu-Base Phases * A15 Phases * Laves Phases * Rare-Earth Compound * Beryllides * Silicides Intermetallics is a valuable source of information for researchers and graduate students working in materials science, metallurgy, condensed-matter physics, and engineering.
Book Synopsis High-temperature Ordered Intermetallic Alloys by : C. C. Koch
Download or read book High-temperature Ordered Intermetallic Alloys written by C. C. Koch and published by . This book was released on 1985 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Intermetallics is concerned with all aspects of ordered chemical compounds between two or more metals and notably with their applications. This book covers new and important research on the crystal chemistry and bonding theory of intermetallics; determination and analysis of phase diagrams; the nature of superlattices, antiphase domains and order-disorder transitions; the geometry and dynamics of dislocations and related defects in intermetallics; theory and experiments relating to flow stress, work-hardening, fatigue and creep; response of deformed intermetallics to annealing; magnetic and electrical properties of intermetallics; structure and properties of grain and interphase boundaries; the effect of deviations from stoichiometry on physical and mechanical properties; crystallisation of intermetallics from the melt or amorphous precursors.
Book Synopsis Intermetallics Research Progress by : Yakov N. Berdovsky
Download or read book Intermetallics Research Progress written by Yakov N. Berdovsky and published by Nova Publishers. This book was released on 2008 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intermetallics is concerned with all aspects of ordered chemical compounds between two or more metals and notably with their applications. This book covers new and important research on the crystal chemistry and bonding theory of intermetallics; determination and analysis of phase diagrams; the nature of superlattices, antiphase domains and order-disorder transitions; the geometry and dynamics of dislocations and related defects in intermetallics; theory and experiments relating to flow stress, work-hardening, fatigue and creep; response of deformed intermetallics to annealing; magnetic and electrical properties of intermetallics; structure and properties of grain and interphase boundaries; the effect of deviations from stoichiometry on physical and mechanical properties; crystallisation of intermetallics from the melt or amorphous precursors.
Basic Compounds for Superalloys: Mechanical Properties explores the mechanical properties of the iron group based intermetallic compounds that are the basis of super-alloys. Chapters explore tensile tests and compressive stress and hardness and provide detailed considerations that are devoted to time dependent deformation, namely creep and cyclic deformation. In addition, a discussion of the nano-crystalline L12 and B2 structures and their mechanical properties is included. Fracture and failure of these materials in both macro and nano-iron based compounds is also considered. This book is ideal for engineers, scientists and technical personnel who work in materials engineering, materials science, and mechanical and chemical engineering. Provides an in-depth focus on the mechanical properties of Fe- superalloy materials Includes a discussion of the static, time dependent and cyclic deformation properties of macro- and nano materials Reviews how superalloy materials behave under a variety of ‘in-service’ environments and conditions
Book Synopsis Basic Compounds for Superalloys by : Joshua Pelleg
Download or read book Basic Compounds for Superalloys written by Joshua Pelleg and published by Elsevier. This book was released on 2018-06-29 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Basic Compounds for Superalloys: Mechanical Properties explores the mechanical properties of the iron group based intermetallic compounds that are the basis of super-alloys. Chapters explore tensile tests and compressive stress and hardness and provide detailed considerations that are devoted to time dependent deformation, namely creep and cyclic deformation. In addition, a discussion of the nano-crystalline L12 and B2 structures and their mechanical properties is included. Fracture and failure of these materials in both macro and nano-iron based compounds is also considered. This book is ideal for engineers, scientists and technical personnel who work in materials engineering, materials science, and mechanical and chemical engineering. Provides an in-depth focus on the mechanical properties of Fe- superalloy materials Includes a discussion of the static, time dependent and cyclic deformation properties of macro- and nano materials Reviews how superalloy materials behave under a variety of ‘in-service’ environments and conditions
Superalloys form a class of the structural materials for high-temperature applications. Nickel superalloys are extensively used in the high-temperature components of gas turbines due to their excellent creep, fatigue, and corrosion resistance at elevated temperatures. These materials are considered paramagnetic in the range of working temperatures. This book presents the features of the ternary phase diagrams Ni-Al-X (X = {Co, Fe, Nb, Ti, Cr}), effects of the alloying on the long-range order and mechanical properties of the Ni3 Al-based alloys. Description of the strain-induced ferromagnetism in the Ni3Al-based alloys and magnetic control of the failure of gas turbine blades are also included. A separate section is devoted to the analysis of the vibration process and strength change in the single-crystal gas turbine blades. This book includes the review of the new intermetallic cobalt superalloys. The structure, crystal lattice parameters, orientation relationships between phases, mechanical and magnetic properties of the Co3(Al,W)-based alloys are described. Non-destructive magnetic point control of the martensite content in low-magnetic austenitic alloys is a new method for detection of the local sites with internal stresses. This method is useful for the detection of the residual stress in the critical parts of industrial products. This book may be useful for specialists in material science, first-year postgraduate students taking a class in material science and engineering, and engineers developing new alloys for the gas turbine technology.
Book Synopsis Superalloys by : Nataliya V. Kazantseva
Download or read book Superalloys written by Nataliya V. Kazantseva and published by CRC Press. This book was released on 2018-12-07 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superalloys form a class of the structural materials for high-temperature applications. Nickel superalloys are extensively used in the high-temperature components of gas turbines due to their excellent creep, fatigue, and corrosion resistance at elevated temperatures. These materials are considered paramagnetic in the range of working temperatures. This book presents the features of the ternary phase diagrams Ni-Al-X (X = {Co, Fe, Nb, Ti, Cr}), effects of the alloying on the long-range order and mechanical properties of the Ni3 Al-based alloys. Description of the strain-induced ferromagnetism in the Ni3Al-based alloys and magnetic control of the failure of gas turbine blades are also included. A separate section is devoted to the analysis of the vibration process and strength change in the single-crystal gas turbine blades. This book includes the review of the new intermetallic cobalt superalloys. The structure, crystal lattice parameters, orientation relationships between phases, mechanical and magnetic properties of the Co3(Al,W)-based alloys are described. Non-destructive magnetic point control of the martensite content in low-magnetic austenitic alloys is a new method for detection of the local sites with internal stresses. This method is useful for the detection of the residual stress in the critical parts of industrial products. This book may be useful for specialists in material science, first-year postgraduate students taking a class in material science and engineering, and engineers developing new alloys for the gas turbine technology.
Superplasticity is shown to be a universal phenomenon in materials ranging from metals and intermetallics to ceramics. Superplastic deformation facilitates the production of materials with specifically chosen properties. This is illustrated using the examples of Mg-, Al-, and Ti-based commercial alloys, steels, and superalloys. Some of the strenghts of this book are: the broad range of materials studied, the reduction of scientific results to a form suitable for the practitioner, a profound physical analysis of the phenomenon, a new approach to superplastic treatment as a kind of strain-heat treatment, the presentation of new data on superplastic flow and on production techniques of micro- and submicrocrystalline structures.
Book Synopsis Superplasticity of Alloys, Intermetallides and Ceramics by : Oscar A. Kaibyshev
Download or read book Superplasticity of Alloys, Intermetallides and Ceramics written by Oscar A. Kaibyshev and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Superplasticity is shown to be a universal phenomenon in materials ranging from metals and intermetallics to ceramics. Superplastic deformation facilitates the production of materials with specifically chosen properties. This is illustrated using the examples of Mg-, Al-, and Ti-based commercial alloys, steels, and superalloys. Some of the strenghts of this book are: the broad range of materials studied, the reduction of scientific results to a form suitable for the practitioner, a profound physical analysis of the phenomenon, a new approach to superplastic treatment as a kind of strain-heat treatment, the presentation of new data on superplastic flow and on production techniques of micro- and submicrocrystalline structures.
