Machinability Of Powder Metallurgy Steels eBook Download PDF

Download Machinability Of Powder Metallurgy Steels full books in PDF, epub, and Kindle. Read online Machinability Of Powder Metallurgy Steels ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!

Machinability of Powder Metallurgy Steels

Author: Andrej Šalak

Publisher: Cambridge Int Science Publishing

Published: 2005

Total Pages: 551

ISBN-13: 1898326827

DOWNLOAD EBOOK

The machinability of powder metallurgy steels is poorer compared with wrought steels of appropriate composition and/or mechanical [properties. The reason for it is a larger number of material and processing variables affecting the final properties of a sintered material. Therefore the machining of powder metallurgy (PM) steels is a permanent subject of investigation and practice. The aim of the book is to make on the basis of present knowledge an overview of all interacting factors in machining process including those applied for the improvement of the machinability. There are the properties of basic plain iron and alloyed powders, various additions, compaction and sintering conditions. Effect of porosity, individual alloying elements and microstructure character is considered. The description of the basic machining processes with their characteristics and with the characteristics of the tool geometry belongs to the mentioned factors. For the improvement of machinability of PM steels different machining aids, as S, MnS, MoS2 and other are frequently used and their chemical and physical characteristics are given. The effect of various machining aids used on machinability of sintered plain iron, iron-carbon and of steels alloyed with Cu, Ni, Mo, Cr, Mn including powder forged steels with very different mechanical properties and very different microstructures is analysed and summarized. The high-speed steel, hardmetal and other tools with their geometry as the part of the cutting process are described in relation to the sintered powder materials. The recommendations for machining of various steels enclose the present knowledge about the machinability of powder metallurgy steels.

Book Synopsis Machinability of Powder Metallurgy Steels by : Andrej Šalak

Download or read book Machinability of Powder Metallurgy Steels written by Andrej Šalak and published by Cambridge Int Science Publishing. This book was released on 2005 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: The machinability of powder metallurgy steels is poorer compared with wrought steels of appropriate composition and/or mechanical [properties. The reason for it is a larger number of material and processing variables affecting the final properties of a sintered material. Therefore the machining of powder metallurgy (PM) steels is a permanent subject of investigation and practice. The aim of the book is to make on the basis of present knowledge an overview of all interacting factors in machining process including those applied for the improvement of the machinability. There are the properties of basic plain iron and alloyed powders, various additions, compaction and sintering conditions. Effect of porosity, individual alloying elements and microstructure character is considered. The description of the basic machining processes with their characteristics and with the characteristics of the tool geometry belongs to the mentioned factors. For the improvement of machinability of PM steels different machining aids, as S, MnS, MoS2 and other are frequently used and their chemical and physical characteristics are given. The effect of various machining aids used on machinability of sintered plain iron, iron-carbon and of steels alloyed with Cu, Ni, Mo, Cr, Mn including powder forged steels with very different mechanical properties and very different microstructures is analysed and summarized. The high-speed steel, hardmetal and other tools with their geometry as the part of the cutting process are described in relation to the sintered powder materials. The recommendations for machining of various steels enclose the present knowledge about the machinability of powder metallurgy steels.

Powder Metallurgy Stainless Steels

Author: Erhard Klar

Publisher: ASM International

Published: 2007-01-01

Total Pages: 247

ISBN-13: 1615030522

DOWNLOAD EBOOK

Book Synopsis Powder Metallurgy Stainless Steels by : Erhard Klar

Download or read book Powder Metallurgy Stainless Steels written by Erhard Klar and published by ASM International. This book was released on 2007-01-01 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Machinability Of Powder Metalluargy Steels

Author: Salak

Publisher: Cambridge International Science Pub

Published: 2008-01-01

Total Pages: 552

ISBN-13: 9788130909387

DOWNLOAD EBOOK

Book Synopsis Machinability Of Powder Metalluargy Steels by : Salak

Download or read book Machinability Of Powder Metalluargy Steels written by Salak and published by Cambridge International Science Pub. This book was released on 2008-01-01 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt:

The Influence of Some Metallurgical Variables on the Machinability of Powder Metallurgy Steels

Author: Phillip John Andersen

Publisher:

Published: 1977

Total Pages: 554

ISBN-13:

DOWNLOAD EBOOK

Book Synopsis The Influence of Some Metallurgical Variables on the Machinability of Powder Metallurgy Steels by : Phillip John Andersen

Download or read book The Influence of Some Metallurgical Variables on the Machinability of Powder Metallurgy Steels written by Phillip John Andersen and published by . This book was released on 1977 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt:

An Experimental Investigation of Various Factors on the Machinability of Powder Metallurgy Austenitic Stainless Steels

Author: John S. Agapiou

Publisher:

Published: 1985

Total Pages: 322

ISBN-13:

DOWNLOAD EBOOK

Book Synopsis An Experimental Investigation of Various Factors on the Machinability of Powder Metallurgy Austenitic Stainless Steels by : John S. Agapiou

Download or read book An Experimental Investigation of Various Factors on the Machinability of Powder Metallurgy Austenitic Stainless Steels written by John S. Agapiou and published by . This book was released on 1985 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Powder Metallurgy

Author: S. A. Tsukerman

Publisher: Elsevier

Published: 2013-10-22

Total Pages: 153

ISBN-13: 1483185346

DOWNLOAD EBOOK

Powder Metallurgy discusses the production of metal powders and other materials made from it. It defines the meaning of metal powders with some illustrations. The book also identifies the processes similar between the production of metal powder and ceramic products. The technology involved and the variation in the process of metallurgy are covered in some chapters of the book. The book enumerates certain advantages in using powder metallurgy over other processes. Methods such as the reduction of the oxides of metals, electrolysis, thermal dissociation, and chemical disintegration are explained. The origin and improvement made on the method are discussed in detail. The goods created using the process are also explained, as well as the types of metals that are being used. A chapter of the book focuses on the flaws of powder metallurgy. The book will provide useful information to metal smiths, chemists, students, and researchers in the field of chemistry.

Book Synopsis Powder Metallurgy by : S. A. Tsukerman

Download or read book Powder Metallurgy written by S. A. Tsukerman and published by Elsevier. This book was released on 2013-10-22 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powder Metallurgy discusses the production of metal powders and other materials made from it. It defines the meaning of metal powders with some illustrations. The book also identifies the processes similar between the production of metal powder and ceramic products. The technology involved and the variation in the process of metallurgy are covered in some chapters of the book. The book enumerates certain advantages in using powder metallurgy over other processes. Methods such as the reduction of the oxides of metals, electrolysis, thermal dissociation, and chemical disintegration are explained. The origin and improvement made on the method are discussed in detail. The goods created using the process are also explained, as well as the types of metals that are being used. A chapter of the book focuses on the flaws of powder metallurgy. The book will provide useful information to metal smiths, chemists, students, and researchers in the field of chemistry.

Advances in powder metallurgy

Author: H. Danninger

Publisher: Elsevier Inc. Chapters

Published: 2013-08-31

Total Pages: 624

ISBN-13: 0128088591

DOWNLOAD EBOOK

Ferrous powder metallurgy (PM) makes up the majority of powder metallurgy products with regard to tonnage. Improving performance is the main trend for pressed and sintered parts, in particular the introduction of cost-effective alloy elements such as Cr and Mn. Furthermore, much can be gained in ferrous PM by elaborate secondary operations. In metal injection moulding (MIM) products, there is a clear trend towards increasingly complex shapes and microsized parts. PM tool steels offer a much finer and fully isotropic microstructure compared to their wrought counterparts and the carbide content may be much higher, resulting in excellent application properties.

Book Synopsis Advances in powder metallurgy by : H. Danninger

Download or read book Advances in powder metallurgy written by H. Danninger and published by Elsevier Inc. Chapters. This book was released on 2013-08-31 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ferrous powder metallurgy (PM) makes up the majority of powder metallurgy products with regard to tonnage. Improving performance is the main trend for pressed and sintered parts, in particular the introduction of cost-effective alloy elements such as Cr and Mn. Furthermore, much can be gained in ferrous PM by elaborate secondary operations. In metal injection moulding (MIM) products, there is a clear trend towards increasingly complex shapes and microsized parts. PM tool steels offer a much finer and fully isotropic microstructure compared to their wrought counterparts and the carbide content may be much higher, resulting in excellent application properties.

Advances in Powder Metallurgy

Author: Isaac Chang

Publisher: Elsevier

Published: 2013-08-31

Total Pages: 624

ISBN-13: 085709890X

DOWNLOAD EBOOK

Powder metallurgy (PM) is a popular metal forming technology used to produce dense and precision components. Different powder and component forming routes can be used to create an end product with specific properties for a particular application or industry. Advances in powder metallurgy explores a range of materials and techniques used for powder metallurgy and the use of this technology across a variety of application areas. Part one discusses the forming and shaping of metal powders and includes chapters on atomisation techniques, electrolysis and plasma synthesis of metallic nanopowders. Part two goes on to highlight specific materials and their properties including advanced powdered steel alloys, porous metals and titanium alloys. Part three reviews the manufacture and densification of PM components and explores joining techniques, process optimisation in powder component manufacturing and non-destructive evaluation of PM parts. Finally, part four focusses on the applications of PM in the automotive industry and the use of PM in the production of cutting tools and biomaterials. Advances in powder metallurgy is a standard reference for structural engineers and component manufacturers in the metal forming industry, professionals working in industries that use PM components and academics with a research interest in the field. Discusses the forming and shaping of metal powders and includes chapters on atomisation techniques Highlights specific materials and their properties including advanced powdered steel alloys, porous metals and titanium alloys Reviews the manufacture and densification of PM components and explores joining techniques

Book Synopsis Advances in Powder Metallurgy by : Isaac Chang

Download or read book Advances in Powder Metallurgy written by Isaac Chang and published by Elsevier. This book was released on 2013-08-31 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powder metallurgy (PM) is a popular metal forming technology used to produce dense and precision components. Different powder and component forming routes can be used to create an end product with specific properties for a particular application or industry. Advances in powder metallurgy explores a range of materials and techniques used for powder metallurgy and the use of this technology across a variety of application areas. Part one discusses the forming and shaping of metal powders and includes chapters on atomisation techniques, electrolysis and plasma synthesis of metallic nanopowders. Part two goes on to highlight specific materials and their properties including advanced powdered steel alloys, porous metals and titanium alloys. Part three reviews the manufacture and densification of PM components and explores joining techniques, process optimisation in powder component manufacturing and non-destructive evaluation of PM parts. Finally, part four focusses on the applications of PM in the automotive industry and the use of PM in the production of cutting tools and biomaterials. Advances in powder metallurgy is a standard reference for structural engineers and component manufacturers in the metal forming industry, professionals working in industries that use PM components and academics with a research interest in the field. Discusses the forming and shaping of metal powders and includes chapters on atomisation techniques Highlights specific materials and their properties including advanced powdered steel alloys, porous metals and titanium alloys Reviews the manufacture and densification of PM components and explores joining techniques

Manganese in Powder Metallurgy Steels

Author: Andrej Šalak

Publisher: Springer Science & Business Media

Published: 2012-07-13

Total Pages: 488

ISBN-13: 190734375X

DOWNLOAD EBOOK

This work in three parts presents a summary of the sintered manganese steel properties from 1948 to 2011 involving processing conditions and other characteristics. In the first and third part are given results attained by the authors based on their finding that manganese (cheapest element) during sintering evaporates and by this the vapour cleans the sintering atmospheres from humidity. The second part presents other positive properties of manganese steels in spite of the doubt of oxidation of manganese during sintering and by this excluding the sintering manganese steels what hinderd the use of manganese in production of sintered parts. All results confirm that only manganese vapour according to finding of the authors ensures effective sintering of manganese steels and parts independently on the authors mind. It follows finally from the work that manganese is possible to use for alloying of powder steels sintered also in practice in H/N atmospheres with low purity and also in pure nitrogen - cheaper than hydrogen without some of the associated problems. Current trends in the field are also presented to the reader.

Book Synopsis Manganese in Powder Metallurgy Steels by : Andrej Šalak

Download or read book Manganese in Powder Metallurgy Steels written by Andrej Šalak and published by Springer Science & Business Media. This book was released on 2012-07-13 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work in three parts presents a summary of the sintered manganese steel properties from 1948 to 2011 involving processing conditions and other characteristics. In the first and third part are given results attained by the authors based on their finding that manganese (cheapest element) during sintering evaporates and by this the vapour cleans the sintering atmospheres from humidity. The second part presents other positive properties of manganese steels in spite of the doubt of oxidation of manganese during sintering and by this excluding the sintering manganese steels what hinderd the use of manganese in production of sintered parts. All results confirm that only manganese vapour according to finding of the authors ensures effective sintering of manganese steels and parts independently on the authors mind. It follows finally from the work that manganese is possible to use for alloying of powder steels sintered also in practice in H/N atmospheres with low purity and also in pure nitrogen - cheaper than hydrogen without some of the associated problems. Current trends in the field are also presented to the reader.

Powder Metallurgy

Author: G. Dowson

Publisher: Springer

Published: 1990

Total Pages: 188

ISBN-13:

DOWNLOAD EBOOK

Powder metallurgy, commonly designated by its initial letters asPM or PM, may be defined as the production of useful artefacts from metal powder without passing through the molten state. This introductory text examines the processes by which these powders are produced, and explores their behaviour in the subsequent consolidation stages.

Book Synopsis Powder Metallurgy by : G. Dowson

Download or read book Powder Metallurgy written by G. Dowson and published by Springer. This book was released on 1990 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powder metallurgy, commonly designated by its initial letters asPM or PM, may be defined as the production of useful artefacts from metal powder without passing through the molten state. This introductory text examines the processes by which these powders are produced, and explores their behaviour in the subsequent consolidation stages.