Methods of Analysis and Solutions of Crack Problems

Methods of Analysis and Solutions of Crack Problems

Author: George C. Sih

Publisher: Springer Science & Business Media

Published: 2013-11-11

Total Pages: 562

ISBN-13: 9401722609

DOWNLOAD EBOOK

It is weH known that the traditional failure criteria cannot adequately explain failures which occur at a nominal stress level considerably lower than the ultimate strength of the material. The current procedure for predicting the safe loads or safe useful life of a structural member has been evolved around the discipline oflinear fracture mechanics. This approach introduces the concept of a crack extension force which can be used to rank materials in some order of fracture resistance. The idea is to determine the largest crack that a material will tolerate without failure. Laboratory methods for characterizing the fracture toughness of many engineering materials are now available. While these test data are useful for providing some rough guidance in the choice of materials, it is not clear how they could be used in the design of a structure. The understanding of the relationship between laboratory tests and fracture design of structures is, to say the least, deficient. Fracture mechanics is presently at astandstill until the basic problems of scaling from laboratory models to fuH size structures and mixed mode crack propagation are resolved. The answers to these questions require some basic understanding ofthe theory and will not be found by testing more specimens. The current theory of fracture is inadequate for many reasons. First of aH it can only treat idealized problems where the applied load must be directed normal to the crack plane.


Book Synopsis Methods of Analysis and Solutions of Crack Problems by : George C. Sih

Download or read book Methods of Analysis and Solutions of Crack Problems written by George C. Sih and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is weH known that the traditional failure criteria cannot adequately explain failures which occur at a nominal stress level considerably lower than the ultimate strength of the material. The current procedure for predicting the safe loads or safe useful life of a structural member has been evolved around the discipline oflinear fracture mechanics. This approach introduces the concept of a crack extension force which can be used to rank materials in some order of fracture resistance. The idea is to determine the largest crack that a material will tolerate without failure. Laboratory methods for characterizing the fracture toughness of many engineering materials are now available. While these test data are useful for providing some rough guidance in the choice of materials, it is not clear how they could be used in the design of a structure. The understanding of the relationship between laboratory tests and fracture design of structures is, to say the least, deficient. Fracture mechanics is presently at astandstill until the basic problems of scaling from laboratory models to fuH size structures and mixed mode crack propagation are resolved. The answers to these questions require some basic understanding ofthe theory and will not be found by testing more specimens. The current theory of fracture is inadequate for many reasons. First of aH it can only treat idealized problems where the applied load must be directed normal to the crack plane.

Solution of Crack Problems

Solution of Crack Problems

Author: D.A. Hills

Publisher: Springer Science & Business Media

Published: 2013-04-17

Total Pages: 314

ISBN-13: 9401586489

DOWNLOAD EBOOK

This book is concerned with the numerical solution of crack problems. The techniques to be developed are particularly appropriate when cracks are relatively short, and are growing in the neighbourhood of some stress raising feature, causing a relatively steep stress gradient. It is therefore practicable to represent the geometry in an idealised way, so that a precise solution may be obtained. This contrasts with, say, the finite element method in which the geometry is modelled exactly, but the subsequent solution is approximate, and computationally more taxing. The family of techniques presented in this book, based loosely on the pioneering work of Eshelby in the late 1950's, and developed by Erdogan, Keer, Mura and many others cited in the text, present an attractive alternative. The basic idea is to use the superposition of the stress field present in the unfiawed body, together with an unknown distribution of 'strain nuclei' (in this book, the strain nucleus employed is the dislocation), chosen so that the crack faces become traction-free. The solution used for the stress field for the nucleus is chosen so that other boundary conditions are satisfied. The technique is therefore efficient, and may be used to model the evolution of a developing crack in two or three dimensions. Solution techniques are described in some detail, and the book should be readily accessible to most engineers, whilst preserving the rigour demanded by the researcher who wishes to develop the method itself.


Book Synopsis Solution of Crack Problems by : D.A. Hills

Download or read book Solution of Crack Problems written by D.A. Hills and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is concerned with the numerical solution of crack problems. The techniques to be developed are particularly appropriate when cracks are relatively short, and are growing in the neighbourhood of some stress raising feature, causing a relatively steep stress gradient. It is therefore practicable to represent the geometry in an idealised way, so that a precise solution may be obtained. This contrasts with, say, the finite element method in which the geometry is modelled exactly, but the subsequent solution is approximate, and computationally more taxing. The family of techniques presented in this book, based loosely on the pioneering work of Eshelby in the late 1950's, and developed by Erdogan, Keer, Mura and many others cited in the text, present an attractive alternative. The basic idea is to use the superposition of the stress field present in the unfiawed body, together with an unknown distribution of 'strain nuclei' (in this book, the strain nucleus employed is the dislocation), chosen so that the crack faces become traction-free. The solution used for the stress field for the nucleus is chosen so that other boundary conditions are satisfied. The technique is therefore efficient, and may be used to model the evolution of a developing crack in two or three dimensions. Solution techniques are described in some detail, and the book should be readily accessible to most engineers, whilst preserving the rigour demanded by the researcher who wishes to develop the method itself.

Methods of Analysis and Solution of Crack Problems : Recent Developments in Fracture Mechanics, Theory and Methods of Solving Crack Problems

Methods of Analysis and Solution of Crack Problems : Recent Developments in Fracture Mechanics, Theory and Methods of Solving Crack Problems

Author: g. c. m Sih

Publisher:

Published: 1973

Total Pages: 0

ISBN-13:

DOWNLOAD EBOOK


Book Synopsis Methods of Analysis and Solution of Crack Problems : Recent Developments in Fracture Mechanics, Theory and Methods of Solving Crack Problems by : g. c. m Sih

Download or read book Methods of Analysis and Solution of Crack Problems : Recent Developments in Fracture Mechanics, Theory and Methods of Solving Crack Problems written by g. c. m Sih and published by . This book was released on 1973 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Multiple Crack Problems in Elasticity

Multiple Crack Problems in Elasticity

Author: Y. Z. Chen

Publisher: Wit Pr/Computational Mechanics

Published: 2003-01

Total Pages: 336

ISBN-13: 9781853129032

DOWNLOAD EBOOK

The authors investigate various integral equations for multiple crack problems in plane elasticity. Formulation of the problems is based on relevant elementary solutions in which the complex variable function method is used.


Book Synopsis Multiple Crack Problems in Elasticity by : Y. Z. Chen

Download or read book Multiple Crack Problems in Elasticity written by Y. Z. Chen and published by Wit Pr/Computational Mechanics. This book was released on 2003-01 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors investigate various integral equations for multiple crack problems in plane elasticity. Formulation of the problems is based on relevant elementary solutions in which the complex variable function method is used.

Crack Analysis in Structural Concrete

Crack Analysis in Structural Concrete

Author: Zihai Shi

Publisher: Butterworth-Heinemann

Published: 2009-06-17

Total Pages: 344

ISBN-13: 9780080942223

DOWNLOAD EBOOK

This new book on the fracture mechanics of concrete focuses on the latest developments in computational theories, and how to apply those theories to solve real engineering problems. Zihai Shi uses his extensive research experience to present detailed examination of multiple-crack analysis and mixed-mode fracture. Compared with other mature engineering disciplines, fracture mechanics of concrete is still a developing field with extensive new research and development. In recent years many different models and applications have been proposed for crack analysis; the author assesses these in turn, identifying their limitations and offering a detailed treatment of those which have been proved to be robust by comprehensive use. After introducing stress singularity in numerical modelling and some basic modelling techniques, the Extended Fictitious Crack Model (EFCM) for multiple-crack analysis is explained with numerical application examples. This theoretical model is then applied to study two important issues in fracture mechanics - crack interaction and localization, and fracture modes and maximum loads. The EFCM is then reformulated to include the shear transfer mechanism on crack surfaces and the method is used to study experimental problems. With a carefully balanced mixture of theory, experiment and application, Crack Analysis in Structural Concrete is an important contribution to this fast-developing field of structural analysis in concrete. Latest theoretical models analysed and tested Detailed assessment of multiple crack analysis and multi-mode fractures Applications designed for solving real-life engineering problems


Book Synopsis Crack Analysis in Structural Concrete by : Zihai Shi

Download or read book Crack Analysis in Structural Concrete written by Zihai Shi and published by Butterworth-Heinemann. This book was released on 2009-06-17 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new book on the fracture mechanics of concrete focuses on the latest developments in computational theories, and how to apply those theories to solve real engineering problems. Zihai Shi uses his extensive research experience to present detailed examination of multiple-crack analysis and mixed-mode fracture. Compared with other mature engineering disciplines, fracture mechanics of concrete is still a developing field with extensive new research and development. In recent years many different models and applications have been proposed for crack analysis; the author assesses these in turn, identifying their limitations and offering a detailed treatment of those which have been proved to be robust by comprehensive use. After introducing stress singularity in numerical modelling and some basic modelling techniques, the Extended Fictitious Crack Model (EFCM) for multiple-crack analysis is explained with numerical application examples. This theoretical model is then applied to study two important issues in fracture mechanics - crack interaction and localization, and fracture modes and maximum loads. The EFCM is then reformulated to include the shear transfer mechanism on crack surfaces and the method is used to study experimental problems. With a carefully balanced mixture of theory, experiment and application, Crack Analysis in Structural Concrete is an important contribution to this fast-developing field of structural analysis in concrete. Latest theoretical models analysed and tested Detailed assessment of multiple crack analysis and multi-mode fractures Applications designed for solving real-life engineering problems

Fracture Mechanics of Multifield Materials

Fracture Mechanics of Multifield Materials

Author: Bogdan Rogowski

Publisher:

Published: 2015-06-13

Total Pages: 308

ISBN-13: 9783659713835

DOWNLOAD EBOOK


Book Synopsis Fracture Mechanics of Multifield Materials by : Bogdan Rogowski

Download or read book Fracture Mechanics of Multifield Materials written by Bogdan Rogowski and published by . This book was released on 2015-06-13 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Cracked it!

Cracked it!

Author: Bernard Garrette

Publisher: Springer

Published: 2018-06-08

Total Pages: 284

ISBN-13: 3319893750

DOWNLOAD EBOOK

Solving complex problems and selling their solutions is critical for personal and organizational success. For most of us, however, it doesn’t come naturally and we haven’t been taught how to do it well. Research shows a host of pitfalls trips us up when we try: We’re quick to believe we understand a situation and jump to a flawed solution. We seek to confirm our hypotheses and ignore conflicting evidence. We view challenges incompletely through the frameworks we know instead of with a fresh pair of eyes. And when we communicate our recommendations, we forget our reasoning isn’t obvious to our audience. How can we do it better? In Cracked It!, seasoned strategy professors and consultants Bernard Garrette, Corey Phelps and Olivier Sibony present a rigorous and practical four-step approach to overcome these pitfalls. Building on tried-and-tested (but rarely revealed) methods of top strategy consultants, research in cognitive psychology, and the latest advances in design thinking, they provide a step-by-step process and toolkit that will help readers tackle any challenging business problem. Using compelling stories and detailed case examples, the authors guide readers through each step in the process: from how to state, structure and then solve problems to how to sell the solutions. Written in an engaging style by a trio of experts with decades of experience researching, teaching and consulting on complex business problems, this book will be an indispensable manual for anyone interested in creating value by helping their organizations crack the problems that matter most.


Book Synopsis Cracked it! by : Bernard Garrette

Download or read book Cracked it! written by Bernard Garrette and published by Springer. This book was released on 2018-06-08 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solving complex problems and selling their solutions is critical for personal and organizational success. For most of us, however, it doesn’t come naturally and we haven’t been taught how to do it well. Research shows a host of pitfalls trips us up when we try: We’re quick to believe we understand a situation and jump to a flawed solution. We seek to confirm our hypotheses and ignore conflicting evidence. We view challenges incompletely through the frameworks we know instead of with a fresh pair of eyes. And when we communicate our recommendations, we forget our reasoning isn’t obvious to our audience. How can we do it better? In Cracked It!, seasoned strategy professors and consultants Bernard Garrette, Corey Phelps and Olivier Sibony present a rigorous and practical four-step approach to overcome these pitfalls. Building on tried-and-tested (but rarely revealed) methods of top strategy consultants, research in cognitive psychology, and the latest advances in design thinking, they provide a step-by-step process and toolkit that will help readers tackle any challenging business problem. Using compelling stories and detailed case examples, the authors guide readers through each step in the process: from how to state, structure and then solve problems to how to sell the solutions. Written in an engaging style by a trio of experts with decades of experience researching, teaching and consulting on complex business problems, this book will be an indispensable manual for anyone interested in creating value by helping their organizations crack the problems that matter most.

Plates and shells with cracks

Plates and shells with cracks

Author: George C. Sih

Publisher: Springer Science & Business Media

Published: 2012-12-06

Total Pages: 344

ISBN-13: 940101292X

DOWNLOAD EBOOK

This third volume of a series on Mechanies of Fraeture deals with eraeks in plates and shelIs. It was noted in Volume 2 on three-dimensional eraek problems that additional free surfaees can lead to substantial mathematical complexities, often making the analysis unmanageable. The theory of plates and shelIs forms a part of the theory of elasticity in which eertain physieal assumptions are made on the basis that the distanee between two bounded surfaees, either fiat or eurved, is small in eomparison with the overall dimen sions of the body. In modern times, the broad and frequent applieations of plate- and shell-like struetural members have aeted as a stimulus to whieh engineers and researchers in the field of fracture meehanies have responded with a wide variety of solutions of teehnieal importanee. These eontributions are covered in this book so that the reader may gain an understanding of how analytieal treat me nt s ofplates and shells containing initial imperfeetions in the form of eraeks are earried out. The development of plate and shell theories has involved long standing controversy on the eonsisteney of omitting eertain small terms and at the same time retaining others of the same order of magnitude. This defieieney depends on the ratio of the plate or shell thiekness, h, to other eharaeteristie dimensions and eannot be eompletely resolved in view of the approximations inherent in the transverse dependence of the extensional and bending stresses.


Book Synopsis Plates and shells with cracks by : George C. Sih

Download or read book Plates and shells with cracks written by George C. Sih and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third volume of a series on Mechanies of Fraeture deals with eraeks in plates and shelIs. It was noted in Volume 2 on three-dimensional eraek problems that additional free surfaees can lead to substantial mathematical complexities, often making the analysis unmanageable. The theory of plates and shelIs forms a part of the theory of elasticity in which eertain physieal assumptions are made on the basis that the distanee between two bounded surfaees, either fiat or eurved, is small in eomparison with the overall dimen sions of the body. In modern times, the broad and frequent applieations of plate- and shell-like struetural members have aeted as a stimulus to whieh engineers and researchers in the field of fracture meehanies have responded with a wide variety of solutions of teehnieal importanee. These eontributions are covered in this book so that the reader may gain an understanding of how analytieal treat me nt s ofplates and shells containing initial imperfeetions in the form of eraeks are earried out. The development of plate and shell theories has involved long standing controversy on the eonsisteney of omitting eertain small terms and at the same time retaining others of the same order of magnitude. This defieieney depends on the ratio of the plate or shell thiekness, h, to other eharaeteristie dimensions and eannot be eompletely resolved in view of the approximations inherent in the transverse dependence of the extensional and bending stresses.

Stochastic Crack Propagation

Stochastic Crack Propagation

Author: Giora Maymon

Publisher: Academic Press

Published: 2018-01-10

Total Pages: 214

ISBN-13: 0128141921

DOWNLOAD EBOOK

Stochastic Crack Propagation: Essential Practical Aspects describes a feature important to the analysis of stochastic crack propagation, starting with essential background theory. Processes, or phenomena, which are of practical importance in the work of design engineers or R&D teams are described chapter by chapter. Many examples are described and supported by listed references, and files of data that can be used with specialist software to practice design situations are included. Advice on how to use various computer programs to design and predict for stochastic crack growth is also provided, giving professionals a complete guide. Presents instructions and exercises in the ideal format for professionals, focusing on applications Explains a methodology on how to optimize the engineering design process by including stochastic crack growth behavior Provides computational files to help readers get up-to-speed with design using programs like ANSYS and NASTRAN for stochastic crack growth


Book Synopsis Stochastic Crack Propagation by : Giora Maymon

Download or read book Stochastic Crack Propagation written by Giora Maymon and published by Academic Press. This book was released on 2018-01-10 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stochastic Crack Propagation: Essential Practical Aspects describes a feature important to the analysis of stochastic crack propagation, starting with essential background theory. Processes, or phenomena, which are of practical importance in the work of design engineers or R&D teams are described chapter by chapter. Many examples are described and supported by listed references, and files of data that can be used with specialist software to practice design situations are included. Advice on how to use various computer programs to design and predict for stochastic crack growth is also provided, giving professionals a complete guide. Presents instructions and exercises in the ideal format for professionals, focusing on applications Explains a methodology on how to optimize the engineering design process by including stochastic crack growth behavior Provides computational files to help readers get up-to-speed with design using programs like ANSYS and NASTRAN for stochastic crack growth

Finite Elements in Fracture Mechanics

Finite Elements in Fracture Mechanics

Author: Meinhard Kuna

Publisher: Springer Science & Business Media

Published: 2013-07-19

Total Pages: 464

ISBN-13: 9400766807

DOWNLOAD EBOOK

Fracture mechanics has established itself as an important discipline of growing interest to those working to assess the safety, reliability and service life of engineering structures and materials. In order to calculate the loading situation at cracks and defects, nowadays numerical techniques like finite element method (FEM) have become indispensable tools for a broad range of applications. The present monograph provides an introduction to the essential concepts of fracture mechanics, its main goal being to procure the special techniques for FEM analysis of crack problems, which have to date only been mastered by experts. All kinds of static, dynamic and fatigue fracture problems are treated in two- and three-dimensional elastic and plastic structural components. The usage of the various solution techniques is demonstrated by means of sample problems selected from practical engineering case studies. The primary target group includes graduate students, researchers in academia and engineers in practice.


Book Synopsis Finite Elements in Fracture Mechanics by : Meinhard Kuna

Download or read book Finite Elements in Fracture Mechanics written by Meinhard Kuna and published by Springer Science & Business Media. This book was released on 2013-07-19 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fracture mechanics has established itself as an important discipline of growing interest to those working to assess the safety, reliability and service life of engineering structures and materials. In order to calculate the loading situation at cracks and defects, nowadays numerical techniques like finite element method (FEM) have become indispensable tools for a broad range of applications. The present monograph provides an introduction to the essential concepts of fracture mechanics, its main goal being to procure the special techniques for FEM analysis of crack problems, which have to date only been mastered by experts. All kinds of static, dynamic and fatigue fracture problems are treated in two- and three-dimensional elastic and plastic structural components. The usage of the various solution techniques is demonstrated by means of sample problems selected from practical engineering case studies. The primary target group includes graduate students, researchers in academia and engineers in practice.