Download Micro Cogeneration full books in PDF, epub, and Kindle. Read online Micro Cogeneration ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
The introduction of micro CHP – the simultaneous production of heat and power in a single building based on small energy conversion units such as Stirling and reciprocating engines or fuel cells – is of increasing political and public interest. This book introduces into micro CHP systems and technologies, and presents the results of the first such investigation carried out by four German research bodies.
Book Synopsis Micro Cogeneration by : Martin Pehnt
Download or read book Micro Cogeneration written by Martin Pehnt and published by Springer Science & Business Media. This book was released on 2006-01-16 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: The introduction of micro CHP – the simultaneous production of heat and power in a single building based on small energy conversion units such as Stirling and reciprocating engines or fuel cells – is of increasing political and public interest. This book introduces into micro CHP systems and technologies, and presents the results of the first such investigation carried out by four German research bodies.
Small and micro combined heat and power (CHP) systems are a form of cogeneration technology suitable for domestic and community buildings, commercial establishments and industrial facilities, as well as local heat networks. One of the benefits of using cogeneration plant is a vastly improved energy efficiency: in some cases achieving up to 80–90% systems efficiency, whereas small-scale electricity production is typically at well below 40% efficiency, using the same amount of fuel. This higher efficiency affords users greater energy security and increased long-term sustainability of energy resources, while lower overall emissions levels also contribute to an improved environmental performance. Small and micro combined heat and power (CHP) systems provides a systematic and comprehensive review of the technological and practical developments of small and micro CHP systems. Part one opens with reviews of small and micro CHP systems and their techno-economic and performance assessment, as well as their integration into distributed energy systems and their increasing utilisation of biomass fuels. Part two focuses on the development of different types of CHP technology, including internal combustion and reciprocating engines, gas turbines and microturbines, Stirling engines, organic Rankine cycle process and fuel cell systems. Heat-activated cooling (i.e. trigeneration) technologies and energy storage systems, of importance to the regional/seasonal viability of this technology round out this section. Finally, part three covers the range of applications of small and micro CHP systems, from residential buildings and district heating, to commercial buildings and industrial applications, as well as reviewing the market deployment of this important technology. With its distinguished editor and international team of expert contributors, Small and micro combined heat and power (CHP) systems is an essential reference work for anyone involved or interested in the design, development, installation and optimisation of small and micro CHP systems. Reviews small- and micro-CHP systems and their techno-economic and performance assessment Explores integration into distributed energy systems and their increasing utilisation of biomass fuels Focuses on the development of different types of CHP technology, including internal combustion and reciprocating engines
Book Synopsis Small and Micro Combined Heat and Power (CHP) Systems by : R Beith
Download or read book Small and Micro Combined Heat and Power (CHP) Systems written by R Beith and published by Elsevier. This book was released on 2011-04-30 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: Small and micro combined heat and power (CHP) systems are a form of cogeneration technology suitable for domestic and community buildings, commercial establishments and industrial facilities, as well as local heat networks. One of the benefits of using cogeneration plant is a vastly improved energy efficiency: in some cases achieving up to 80–90% systems efficiency, whereas small-scale electricity production is typically at well below 40% efficiency, using the same amount of fuel. This higher efficiency affords users greater energy security and increased long-term sustainability of energy resources, while lower overall emissions levels also contribute to an improved environmental performance. Small and micro combined heat and power (CHP) systems provides a systematic and comprehensive review of the technological and practical developments of small and micro CHP systems. Part one opens with reviews of small and micro CHP systems and their techno-economic and performance assessment, as well as their integration into distributed energy systems and their increasing utilisation of biomass fuels. Part two focuses on the development of different types of CHP technology, including internal combustion and reciprocating engines, gas turbines and microturbines, Stirling engines, organic Rankine cycle process and fuel cell systems. Heat-activated cooling (i.e. trigeneration) technologies and energy storage systems, of importance to the regional/seasonal viability of this technology round out this section. Finally, part three covers the range of applications of small and micro CHP systems, from residential buildings and district heating, to commercial buildings and industrial applications, as well as reviewing the market deployment of this important technology. With its distinguished editor and international team of expert contributors, Small and micro combined heat and power (CHP) systems is an essential reference work for anyone involved or interested in the design, development, installation and optimisation of small and micro CHP systems. Reviews small- and micro-CHP systems and their techno-economic and performance assessment Explores integration into distributed energy systems and their increasing utilisation of biomass fuels Focuses on the development of different types of CHP technology, including internal combustion and reciprocating engines
The introduction of micro CHP – the simultaneous production of heat and power in a single building based on small energy conversion units such as Stirling and reciprocating engines or fuel cells – is of increasing political and public interest. This book introduces into micro CHP systems and technologies, and presents the results of the first such investigation carried out by four German research bodies.
Book Synopsis Micro Cogeneration by : Martin Pehnt
Download or read book Micro Cogeneration written by Martin Pehnt and published by Springer. This book was released on 2010-02-12 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The introduction of micro CHP – the simultaneous production of heat and power in a single building based on small energy conversion units such as Stirling and reciprocating engines or fuel cells – is of increasing political and public interest. This book introduces into micro CHP systems and technologies, and presents the results of the first such investigation carried out by four German research bodies.
This book presents the most recent trends and concepts in power engineering, especially with regard to prosumer and civic energy generation. In so doing, it draws widely on his experience gained during the development of steam microturbines for use in small combined heat and power stations based on the organic Rankine cycle (CHP-ORC). Major issues concerning the dynamic properties of mechanical systems, in particular rotating systems, are discussed, and the results obtained when using unconventional bearing systems, presented. Modeling and analysis of radial-flow and axial-flow microturbines are addressed in detail, covering rotor analysis with different bearing systems, simulation modal analysis, and stress analysis. Furthermore, experimental studies of the dynamic properties of microturbine elements are extensively described. Interest in distributed generation and CHP-ORC is growing rapidly, and the potential market for such systems promises to be very large. This book will be of value for engineers and scientists involved in the design, modeling, operation, and diagnostics of various types of turbomachinery, especially steam microturbines.
Book Synopsis Steam Microturbines in Distributed Cogeneration by : Jan Kiciński
Download or read book Steam Microturbines in Distributed Cogeneration written by Jan Kiciński and published by Springer. This book was released on 2014-11-05 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the most recent trends and concepts in power engineering, especially with regard to prosumer and civic energy generation. In so doing, it draws widely on his experience gained during the development of steam microturbines for use in small combined heat and power stations based on the organic Rankine cycle (CHP-ORC). Major issues concerning the dynamic properties of mechanical systems, in particular rotating systems, are discussed, and the results obtained when using unconventional bearing systems, presented. Modeling and analysis of radial-flow and axial-flow microturbines are addressed in detail, covering rotor analysis with different bearing systems, simulation modal analysis, and stress analysis. Furthermore, experimental studies of the dynamic properties of microturbine elements are extensively described. Interest in distributed generation and CHP-ORC is growing rapidly, and the potential market for such systems promises to be very large. This book will be of value for engineers and scientists involved in the design, modeling, operation, and diagnostics of various types of turbomachinery, especially steam microturbines.
This book provides a manual for the technical and structural design of systems for supplying decentralised energy in residential buildings. It presents the micro-combined cooling, heating & power systems Stirling engines & renewable energy sources (mCCHP-SE-RES) systems in an accessible manner both for the public at large, and for professionals who conceive, design or commercialise such systems or their components. The high performance levels of these systems are demonstrated within the final chapter by the results of an experiment in which a house is equipped with a mCCHP-SE-RES system. The reader is also familiarized with the conceptual, technical and legal aspects of modern domestic energy systems; the components that constitute these systems; and advanced algorithms for achieving the structural and technical design of such systems. In residential buildings, satisfying demands of durable development has gradually evolved from necessity to obligation and institutionalisation. Consequently a major paradigm change has appeared in the supply of energy to residential buildings, from the centralised production of energy using fossil fuels to the decentralised production of energy using local renewable sources. Furthermore, on the energy system market, energy micro systems which use renewable energy sources are increasingly commercialised. From among these, the mCCHP-SE-RES systems are particularly striking because they offer a high performance and they enhance the relationship between humans and the environment. This book is intended for postgraduate students of electrical engineering, applied mathematicians, and researchers of modelling and control of complex systems or power system technologies.
Book Synopsis Design for Micro-Combined Cooling, Heating and Power Systems by : Nicolae Badea
Download or read book Design for Micro-Combined Cooling, Heating and Power Systems written by Nicolae Badea and published by Springer. This book was released on 2014-09-25 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a manual for the technical and structural design of systems for supplying decentralised energy in residential buildings. It presents the micro-combined cooling, heating & power systems Stirling engines & renewable energy sources (mCCHP-SE-RES) systems in an accessible manner both for the public at large, and for professionals who conceive, design or commercialise such systems or their components. The high performance levels of these systems are demonstrated within the final chapter by the results of an experiment in which a house is equipped with a mCCHP-SE-RES system. The reader is also familiarized with the conceptual, technical and legal aspects of modern domestic energy systems; the components that constitute these systems; and advanced algorithms for achieving the structural and technical design of such systems. In residential buildings, satisfying demands of durable development has gradually evolved from necessity to obligation and institutionalisation. Consequently a major paradigm change has appeared in the supply of energy to residential buildings, from the centralised production of energy using fossil fuels to the decentralised production of energy using local renewable sources. Furthermore, on the energy system market, energy micro systems which use renewable energy sources are increasingly commercialised. From among these, the mCCHP-SE-RES systems are particularly striking because they offer a high performance and they enhance the relationship between humans and the environment. This book is intended for postgraduate students of electrical engineering, applied mathematicians, and researchers of modelling and control of complex systems or power system technologies.
If there are two phrases we have come to know very well, they are 'environmental awareness' and 'credit crunch'. The world is looking for ways to decrease the emission of CO2 into the atmosphere, without incurring major costs in doing so. By increasing efficiencies up to about 90 per cent using well-established and mature technologies, cogeneration represents the best option for short-term reductions in CO2 emission levels.
Book Synopsis Cogeneration by : David Flin
Download or read book Cogeneration written by David Flin and published by IET. This book was released on 2010 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: If there are two phrases we have come to know very well, they are 'environmental awareness' and 'credit crunch'. The world is looking for ways to decrease the emission of CO2 into the atmosphere, without incurring major costs in doing so. By increasing efficiencies up to about 90 per cent using well-established and mature technologies, cogeneration represents the best option for short-term reductions in CO2 emission levels.
When used appropriately, building performance simulation has the potential to reduce the environmental impact of the built environment, to improve indoor quality and productivity, as well as to facilitate future innovation and technological progress in construction. Since publication of the first edition of Building Performance Simulation for Design and Operation, the discussion has shifted from a focus on software features to a new agenda, which centres on the effectiveness of building performance simulation in building life cycle processes. This new edition provides a unique and comprehensive overview of building performance simulation for the complete building life cycle from conception to demolition, and from a single building to district level. It contains new chapters on building information modelling, occupant behaviour modelling, urban physics modelling, urban building energy modelling and renewable energy systems modelling. This new edition keeps the same chapter structure throughout including learning objectives, chapter summaries and assignments. Moreover, the book: • Provides unique insights into the techniques of building performance modelling and simulation and their application to performance-based design and operation of buildings and the systems which service them. • Provides readers with the essential concepts of computational support of performance-based design and operation. • Provides examples of how to use building simulation techniques for practical design, management and operation, their limitations and future direction. It is primarily intended for building and systems designers and operators, and postgraduate architectural, environmental or mechanical engineering students.
Book Synopsis Building Performance Simulation for Design and Operation by : Jan L.M. Hensen
Download or read book Building Performance Simulation for Design and Operation written by Jan L.M. Hensen and published by Routledge. This book was released on 2019-04-24 with total page 958 pages. Available in PDF, EPUB and Kindle. Book excerpt: When used appropriately, building performance simulation has the potential to reduce the environmental impact of the built environment, to improve indoor quality and productivity, as well as to facilitate future innovation and technological progress in construction. Since publication of the first edition of Building Performance Simulation for Design and Operation, the discussion has shifted from a focus on software features to a new agenda, which centres on the effectiveness of building performance simulation in building life cycle processes. This new edition provides a unique and comprehensive overview of building performance simulation for the complete building life cycle from conception to demolition, and from a single building to district level. It contains new chapters on building information modelling, occupant behaviour modelling, urban physics modelling, urban building energy modelling and renewable energy systems modelling. This new edition keeps the same chapter structure throughout including learning objectives, chapter summaries and assignments. Moreover, the book: • Provides unique insights into the techniques of building performance modelling and simulation and their application to performance-based design and operation of buildings and the systems which service them. • Provides readers with the essential concepts of computational support of performance-based design and operation. • Provides examples of how to use building simulation techniques for practical design, management and operation, their limitations and future direction. It is primarily intended for building and systems designers and operators, and postgraduate architectural, environmental or mechanical engineering students.
Practical solutions for sustainability In this timely guide, one of the world's leaders in advanced building technology implementation shows architects and engineers proven and practical methods for implementing these technologies in sustainably-designed buildings. Because of the very limited time architects are given from being awarded a project to concept design, this book offers clear and workable solutions for implementing solar energy, radiant heating and cooling floors, displacement ventilation, net zero, and more. It provides helpful tips and suggestions for architects and engineers to work together on implementing these technologies, along with many innovative possibilities for developing a truly integrated design. This book also explores and explains the many benefits of advanced technologies, including reduced greenhouse gas emissions, lower operating costs, noise reduction, improved indoor air quality, and more. In addition, Advanced Building Technologies for Sustainability: Offers detailed coverage of solar energy systems, thermal energy storage, geothermal systems, high-performance envelopes, chilled beams, under-floor air distribution, displacement induction units, and much more Provides case studies of projects using advanced technologies and demonstrates their implementation in a variety of contexts and building types Covers the implementation of advanced technologies in office towers, large residential buildings, hospitals, schools, dormitories, theaters, colleges, and more Complete with a clear and insightful explanation of the requirements for and benefits of acquiring the U.S. Green Building Council's LEED certification, Advanced Building Technologies for Sustainability is an important resource for architects, engineers, developers, and contractors involved in sustainable projects using advanced technologies.
Book Synopsis Advanced Building Technologies for Sustainability by : Asif Syed
Download or read book Advanced Building Technologies for Sustainability written by Asif Syed and published by John Wiley & Sons. This book was released on 2012-06-07 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical solutions for sustainability In this timely guide, one of the world's leaders in advanced building technology implementation shows architects and engineers proven and practical methods for implementing these technologies in sustainably-designed buildings. Because of the very limited time architects are given from being awarded a project to concept design, this book offers clear and workable solutions for implementing solar energy, radiant heating and cooling floors, displacement ventilation, net zero, and more. It provides helpful tips and suggestions for architects and engineers to work together on implementing these technologies, along with many innovative possibilities for developing a truly integrated design. This book also explores and explains the many benefits of advanced technologies, including reduced greenhouse gas emissions, lower operating costs, noise reduction, improved indoor air quality, and more. In addition, Advanced Building Technologies for Sustainability: Offers detailed coverage of solar energy systems, thermal energy storage, geothermal systems, high-performance envelopes, chilled beams, under-floor air distribution, displacement induction units, and much more Provides case studies of projects using advanced technologies and demonstrates their implementation in a variety of contexts and building types Covers the implementation of advanced technologies in office towers, large residential buildings, hospitals, schools, dormitories, theaters, colleges, and more Complete with a clear and insightful explanation of the requirements for and benefits of acquiring the U.S. Green Building Council's LEED certification, Advanced Building Technologies for Sustainability is an important resource for architects, engineers, developers, and contractors involved in sustainable projects using advanced technologies.
This multi-disciplinary book presents the most recent advances in exergy, energy, and environmental issues. Volume 2 focuses on applications and covers current problems, future needs, and prospects in the area of energy and environment from researchers worldwide. Based on selected lectures from the Seventh International Exergy, Energy and Environmental Symposium (IEEES7-2015) and complemented by further invited contributions, this comprehensive set of contributions promote the exchange of new ideas and techniques in energy conversion and conservation in order to exchange best practices in "energetic efficiency". Applications are included that apply to the green transportation and sustainable mobility sectors, especially regarding the development of sustainable technologies for thermal comforts and green transportation vehicles. Furthermore, contributions on renewable and sustainable energy sources, strategies for energy production, and the carbon-free society constitute an important part of this book. Exergy for Better Environment and Sustainablity, Volume 2 will appeal to researchers, students, and professionals within engineering and the renewable energy fields.
Book Synopsis Exergy for A Better Environment and Improved Sustainability 2 by : Fethi Aloui
Download or read book Exergy for A Better Environment and Improved Sustainability 2 written by Fethi Aloui and published by Springer. This book was released on 2018-08-22 with total page 1203 pages. Available in PDF, EPUB and Kindle. Book excerpt: This multi-disciplinary book presents the most recent advances in exergy, energy, and environmental issues. Volume 2 focuses on applications and covers current problems, future needs, and prospects in the area of energy and environment from researchers worldwide. Based on selected lectures from the Seventh International Exergy, Energy and Environmental Symposium (IEEES7-2015) and complemented by further invited contributions, this comprehensive set of contributions promote the exchange of new ideas and techniques in energy conversion and conservation in order to exchange best practices in "energetic efficiency". Applications are included that apply to the green transportation and sustainable mobility sectors, especially regarding the development of sustainable technologies for thermal comforts and green transportation vehicles. Furthermore, contributions on renewable and sustainable energy sources, strategies for energy production, and the carbon-free society constitute an important part of this book. Exergy for Better Environment and Sustainablity, Volume 2 will appeal to researchers, students, and professionals within engineering and the renewable energy fields.
Innovation is key to achieving a sustainable electricity system. New technologies and organizational changes can bring about more sustainable, climate-friendly electricity structures. Yet the dynamics of innovation are complex, and difficult to shape. This book, written by experts in the field, sets out to explore the dynamics, the drivers and the setting of innovation processes. Case studies on micro cogeneration, carbon capture and storage, consumer feedback, network regulation and emissions trading provide insights into innovation dynamics in the electricity system and are analyzed to derive strategic implications for innovation policies. A special focus is placed on drivers and barriers of change, and their consequences for shaping the innovation process. This book is an indispensable source of information for researchers and decision makers in energy and climate change as well as for lecturers and students interested in the principles and ramifications of electricity innovation dynamics.
Book Synopsis Innovation for Sustainable Electricity Systems by : Barbara Praetorius
Download or read book Innovation for Sustainable Electricity Systems written by Barbara Praetorius and published by Springer Science & Business Media. This book was released on 2008-10-01 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovation is key to achieving a sustainable electricity system. New technologies and organizational changes can bring about more sustainable, climate-friendly electricity structures. Yet the dynamics of innovation are complex, and difficult to shape. This book, written by experts in the field, sets out to explore the dynamics, the drivers and the setting of innovation processes. Case studies on micro cogeneration, carbon capture and storage, consumer feedback, network regulation and emissions trading provide insights into innovation dynamics in the electricity system and are analyzed to derive strategic implications for innovation policies. A special focus is placed on drivers and barriers of change, and their consequences for shaping the innovation process. This book is an indispensable source of information for researchers and decision makers in energy and climate change as well as for lecturers and students interested in the principles and ramifications of electricity innovation dynamics.
