Mixing in the Process Industries

Mixing in the Process Industries

Author: A W NIENOW

Publisher: Butterworth-Heinemann

Published: 1997-09-11

Total Pages: 429

ISBN-13: 0080536581

DOWNLOAD EBOOK

This volume is a valuable reference work for the student and the practising engineer in the chemical, pharmaceutical, minerals, food, plastics, paper and metallurgical industries. The second edition of this successful text has been thoroughly rewritten and updated. Based on the long running post-experience course produced by the University of Bradford, in association with the Institution of Chemical Engineers, it covers all aspects of mixing, from fundamentals through to design procedures in single and multi-phase systems. Experts from both industry and academia have contributed to this work giving both a theoretical practical approach. It covers dry and wet powders, single and two-phase liquids, solid/liquid and gas/liquid systems. The range of mixers available for such diverse duties is dealt with, including tumbler mixers for powders, mechanically agitated vessels, in-line continuous mixers and jet mixers. Coverage is given of the range of mixing objectives, varying from achieving product uniformity to obtaining optimum conditions for mass transfer and chemical reactions. This volume is a valuable reference work for the student and the practising engineer in the chemical, pharmaceutical, minerals, food, plastics, paper and metallurgical industries. The second edition of this successful text has been thoroughly rewritten and updated. Based on the long running post-experience course produced by the University of Bradford, in association with the Institution of Chemical Engineers, it covers all aspects of mixing, from fundamentals through to design procedures in single and multi-phase systems. Experts from both industry and academia have contributed to this work giving both a theoretical practical approach. It covers dry and wet powders, single and two-phase liquids, solid/liquid and gas/liquid systems. The range of mixers available for such diverse duties is dealt with, including tumbler mixers for powders, mechanically agitated vessels, in-line continuous mixers and jet mixers. Coverage is given of the range of mixing objectives, varying from achieving product uniformity to obtaining optimum conditions for mass transfer and chemical reactions.


Book Synopsis Mixing in the Process Industries by : A W NIENOW

Download or read book Mixing in the Process Industries written by A W NIENOW and published by Butterworth-Heinemann. This book was released on 1997-09-11 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is a valuable reference work for the student and the practising engineer in the chemical, pharmaceutical, minerals, food, plastics, paper and metallurgical industries. The second edition of this successful text has been thoroughly rewritten and updated. Based on the long running post-experience course produced by the University of Bradford, in association with the Institution of Chemical Engineers, it covers all aspects of mixing, from fundamentals through to design procedures in single and multi-phase systems. Experts from both industry and academia have contributed to this work giving both a theoretical practical approach. It covers dry and wet powders, single and two-phase liquids, solid/liquid and gas/liquid systems. The range of mixers available for such diverse duties is dealt with, including tumbler mixers for powders, mechanically agitated vessels, in-line continuous mixers and jet mixers. Coverage is given of the range of mixing objectives, varying from achieving product uniformity to obtaining optimum conditions for mass transfer and chemical reactions. This volume is a valuable reference work for the student and the practising engineer in the chemical, pharmaceutical, minerals, food, plastics, paper and metallurgical industries. The second edition of this successful text has been thoroughly rewritten and updated. Based on the long running post-experience course produced by the University of Bradford, in association with the Institution of Chemical Engineers, it covers all aspects of mixing, from fundamentals through to design procedures in single and multi-phase systems. Experts from both industry and academia have contributed to this work giving both a theoretical practical approach. It covers dry and wet powders, single and two-phase liquids, solid/liquid and gas/liquid systems. The range of mixers available for such diverse duties is dealt with, including tumbler mixers for powders, mechanically agitated vessels, in-line continuous mixers and jet mixers. Coverage is given of the range of mixing objectives, varying from achieving product uniformity to obtaining optimum conditions for mass transfer and chemical reactions.

Mixing in Process Industries

Mixing in Process Industries

Author: Harnby

Publisher:

Published: 1992-11-01

Total Pages:

ISBN-13: 9780075862857

DOWNLOAD EBOOK


Book Synopsis Mixing in Process Industries by : Harnby

Download or read book Mixing in Process Industries written by Harnby and published by . This book was released on 1992-11-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Mixing for the Process Industries

Mixing for the Process Industries

Author: R. McDonough

Publisher: Springer

Published: 2014-01-14

Total Pages: 0

ISBN-13: 9789401165389

DOWNLOAD EBOOK

This book is written primarily for an audience of engineers who design, specify, procure, update, and maintain mixers in the processing industries. It is an ap plication-oriented handbook to support the design and operation of mixers for liquids, liquids and solids, liquids and gases, and any combination thereof. This book does not address solids mixing. Mixing applications are identified as either flow controlling or shear rate controlling, and are addressed as such. Specific mixing applications and design parameters are presented for blending, solid suspension, heat transfer, mass transfer, dispersions, extractions, etc. Fundamentals of mixer design and operation, agitation applications spec trum, types and geometries of mixing impellers, etc. are presented in Chapter I, providing the basis for practical information presented in subsequent chap ters. Flow controlled mixing applications are discussed in Chapter 2. These in clude blending, solid suspension, heat transfer, dissolving of solids, and crys tallization. Optimization of mixer design is emphasized, with an eye to saving power and capital cost. Also discussed is the use of draft tube circulator mixers to optimize mixer performance and cost. Shear controlled mixing applications are addressed in Chapter 3. These in clude gas-liquid dispersions, mass transfer, fermentation, emulsions, extrac tions, and dispersions of solids in liquids. Chapter 4 focuses on geometric and nongeometric scaleup of mixers to ac complish equal or better mixing results in various scales of volume. Scaleup relevant to applications of blending, solids suspension, and mass and heat trans fer is explained.


Book Synopsis Mixing for the Process Industries by : R. McDonough

Download or read book Mixing for the Process Industries written by R. McDonough and published by Springer. This book was released on 2014-01-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is written primarily for an audience of engineers who design, specify, procure, update, and maintain mixers in the processing industries. It is an ap plication-oriented handbook to support the design and operation of mixers for liquids, liquids and solids, liquids and gases, and any combination thereof. This book does not address solids mixing. Mixing applications are identified as either flow controlling or shear rate controlling, and are addressed as such. Specific mixing applications and design parameters are presented for blending, solid suspension, heat transfer, mass transfer, dispersions, extractions, etc. Fundamentals of mixer design and operation, agitation applications spec trum, types and geometries of mixing impellers, etc. are presented in Chapter I, providing the basis for practical information presented in subsequent chap ters. Flow controlled mixing applications are discussed in Chapter 2. These in clude blending, solid suspension, heat transfer, dissolving of solids, and crys tallization. Optimization of mixer design is emphasized, with an eye to saving power and capital cost. Also discussed is the use of draft tube circulator mixers to optimize mixer performance and cost. Shear controlled mixing applications are addressed in Chapter 3. These in clude gas-liquid dispersions, mass transfer, fermentation, emulsions, extrac tions, and dispersions of solids in liquids. Chapter 4 focuses on geometric and nongeometric scaleup of mixers to ac complish equal or better mixing results in various scales of volume. Scaleup relevant to applications of blending, solids suspension, and mass and heat trans fer is explained.

Handbook of Industrial Mixing

Handbook of Industrial Mixing

Author: Edward L. Paul

Publisher: John Wiley & Sons

Published: 2004-02-17

Total Pages: 1450

ISBN-13: 0471451444

DOWNLOAD EBOOK

Handbook of Industrial Mixing will explain the difference and uses of a variety of mixers including gear mixers, top entry mixers, side entry mixers, bottom entry mixers, on-line mixers, and submerged mixers The Handbook discusses the trade-offs among various mixers, concentrating on which might be considered for a particular process. Handbook of Industrial Mixing explains industrial mixers in a clear concise manner, and also: * Contains a CD-ROM with video clips showing different type of mixers in action and a overview of their uses. * Gives practical insights by the top professional in the field. * Details applications in key industries. * Provides the professional with information he did receive in school


Book Synopsis Handbook of Industrial Mixing by : Edward L. Paul

Download or read book Handbook of Industrial Mixing written by Edward L. Paul and published by John Wiley & Sons. This book was released on 2004-02-17 with total page 1450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Industrial Mixing will explain the difference and uses of a variety of mixers including gear mixers, top entry mixers, side entry mixers, bottom entry mixers, on-line mixers, and submerged mixers The Handbook discusses the trade-offs among various mixers, concentrating on which might be considered for a particular process. Handbook of Industrial Mixing explains industrial mixers in a clear concise manner, and also: * Contains a CD-ROM with video clips showing different type of mixers in action and a overview of their uses. * Gives practical insights by the top professional in the field. * Details applications in key industries. * Provides the professional with information he did receive in school

Mixing for the Process Industries

Mixing for the Process Industries

Author: R. McDonough

Publisher: Springer

Published: 1992

Total Pages: 264

ISBN-13:

DOWNLOAD EBOOK

This book is written primarily for an audience of engineers who design, specify, procure, update, and maintain mixers in the processing industries. It is an ap plication-oriented handbook to support the design and operation of mixers for liquids, liquids and solids, liquids and gases, and any combination thereof. This book does not address solids mixing. Mixing applications are identified as either flow controlling or shear rate controlling, and are addressed as such. Specific mixing applications and design parameters are presented for blending, solid suspension, heat transfer, mass transfer, dispersions, extractions, etc. Fundamentals of mixer design and operation, agitation applications spec trum, types and geometries of mixing impellers, etc. are presented in Chapter I, providing the basis for practical information presented in subsequent chap ters. Flow controlled mixing applications are discussed in Chapter 2. These in clude blending, solid suspension, heat transfer, dissolving of solids, and crys tallization. Optimization of mixer design is emphasized, with an eye to saving power and capital cost. Also discussed is the use of draft tube circulator mixers to optimize mixer performance and cost. Shear controlled mixing applications are addressed in Chapter 3. These in clude gas-liquid dispersions, mass transfer, fermentation, emulsions, extrac tions, and dispersions of solids in liquids. Chapter 4 focuses on geometric and nongeometric scaleup of mixers to ac complish equal or better mixing results in various scales of volume. Scaleup relevant to applications of blending, solids suspension, and mass and heat trans fer is explained.


Book Synopsis Mixing for the Process Industries by : R. McDonough

Download or read book Mixing for the Process Industries written by R. McDonough and published by Springer. This book was released on 1992 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is written primarily for an audience of engineers who design, specify, procure, update, and maintain mixers in the processing industries. It is an ap plication-oriented handbook to support the design and operation of mixers for liquids, liquids and solids, liquids and gases, and any combination thereof. This book does not address solids mixing. Mixing applications are identified as either flow controlling or shear rate controlling, and are addressed as such. Specific mixing applications and design parameters are presented for blending, solid suspension, heat transfer, mass transfer, dispersions, extractions, etc. Fundamentals of mixer design and operation, agitation applications spec trum, types and geometries of mixing impellers, etc. are presented in Chapter I, providing the basis for practical information presented in subsequent chap ters. Flow controlled mixing applications are discussed in Chapter 2. These in clude blending, solid suspension, heat transfer, dissolving of solids, and crys tallization. Optimization of mixer design is emphasized, with an eye to saving power and capital cost. Also discussed is the use of draft tube circulator mixers to optimize mixer performance and cost. Shear controlled mixing applications are addressed in Chapter 3. These in clude gas-liquid dispersions, mass transfer, fermentation, emulsions, extrac tions, and dispersions of solids in liquids. Chapter 4 focuses on geometric and nongeometric scaleup of mixers to ac complish equal or better mixing results in various scales of volume. Scaleup relevant to applications of blending, solids suspension, and mass and heat trans fer is explained.

Scaleup and Design of Industrial Mixing Processes

Scaleup and Design of Industrial Mixing Processes

Author: Gary B. Tatterson

Publisher:

Published: 2003

Total Pages: 392

ISBN-13: 9780972663519

DOWNLOAD EBOOK

Mistakes in process scaleup can be costly. This text is a comprehensive and highly practical source to all types of mixing and scaleup issues.


Book Synopsis Scaleup and Design of Industrial Mixing Processes by : Gary B. Tatterson

Download or read book Scaleup and Design of Industrial Mixing Processes written by Gary B. Tatterson and published by . This book was released on 2003 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mistakes in process scaleup can be costly. This text is a comprehensive and highly practical source to all types of mixing and scaleup issues.

Advances in Industrial Mixing

Advances in Industrial Mixing

Author: Suzanne M. Kresta

Publisher: John Wiley & Sons

Published: 2016-03-11

Total Pages: 1035

ISBN-13: 1118944291

DOWNLOAD EBOOK

Advances in Industrial Mixing is a companion volume and update to the Handbook of Industrial Mixing. The second volume fills in gaps for a number of industries that were not covered in the first edition. Significant changes in five of the fundamental areas are covered in entirely updated or new chapters. The original text is provided as a searchable pdf file on the accompanying USB. This book explains industrial mixers and mixing problems clearly and concisely. Gives practical insights by the top professionals in the field, combining industrial design standards with fundamental insight. Details applications in 14 key industries. Six of these are new since the first edition. Provides the professional with information he/she did not receive in school. Five completely rewritten chapters on mixing fundamentals where significant advances have happened since the first edition and seven concise update chapters which summarize critical technical information.


Book Synopsis Advances in Industrial Mixing by : Suzanne M. Kresta

Download or read book Advances in Industrial Mixing written by Suzanne M. Kresta and published by John Wiley & Sons. This book was released on 2016-03-11 with total page 1035 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Industrial Mixing is a companion volume and update to the Handbook of Industrial Mixing. The second volume fills in gaps for a number of industries that were not covered in the first edition. Significant changes in five of the fundamental areas are covered in entirely updated or new chapters. The original text is provided as a searchable pdf file on the accompanying USB. This book explains industrial mixers and mixing problems clearly and concisely. Gives practical insights by the top professionals in the field, combining industrial design standards with fundamental insight. Details applications in 14 key industries. Six of these are new since the first edition. Provides the professional with information he/she did not receive in school. Five completely rewritten chapters on mixing fundamentals where significant advances have happened since the first edition and seven concise update chapters which summarize critical technical information.

Non-Newtonian Flow

Non-Newtonian Flow

Author: R. P. Chhabra

Publisher: Elsevier

Published: 1999-08-19

Total Pages: 453

ISBN-13: 0080512836

DOWNLOAD EBOOK

Non-Newtonian materials are encountered in virtually all of the chemical and process industries and a full understanding of their nature and flow characteristics is an essential requirement for engineers and scientists involved in their formulation and handling. This book will bridge the gap between much of the highly theoretical and mathematically complex work of the rheologist and the practical needs of those who have to design and operate plants in which these materials are handled and processed. At the same time, numerous references are included for the benefit of those who need to delve more deeply into the subject.The starting point for any work on non-newtonian fluids is their characterisation over the range of conditions to which they are likely to be subjected during manufacture or utilisation, and this topic is treated early on in the book in a chapter commissioned from an expert in the field of rheological measurements. Coverage of topics is extensive and this book offers a unique and rich selection of material including the flow of single phase and multiphase mixtures in pipes, in packed and fluidised bed systems, heat and mass transfer in boundary layers and in simple duct flows, and mixing etc.An important and novel feature of the book is the inclusion of a wide selection of worked examples to illustrate the methods of calculation. It also incorporates a large selection of problems for the reader to tackle himself.


Book Synopsis Non-Newtonian Flow by : R. P. Chhabra

Download or read book Non-Newtonian Flow written by R. P. Chhabra and published by Elsevier. This book was released on 1999-08-19 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-Newtonian materials are encountered in virtually all of the chemical and process industries and a full understanding of their nature and flow characteristics is an essential requirement for engineers and scientists involved in their formulation and handling. This book will bridge the gap between much of the highly theoretical and mathematically complex work of the rheologist and the practical needs of those who have to design and operate plants in which these materials are handled and processed. At the same time, numerous references are included for the benefit of those who need to delve more deeply into the subject.The starting point for any work on non-newtonian fluids is their characterisation over the range of conditions to which they are likely to be subjected during manufacture or utilisation, and this topic is treated early on in the book in a chapter commissioned from an expert in the field of rheological measurements. Coverage of topics is extensive and this book offers a unique and rich selection of material including the flow of single phase and multiphase mixtures in pipes, in packed and fluidised bed systems, heat and mass transfer in boundary layers and in simple duct flows, and mixing etc.An important and novel feature of the book is the inclusion of a wide selection of worked examples to illustrate the methods of calculation. It also incorporates a large selection of problems for the reader to tackle himself.

Energy Management and Efficiency for the Process Industries

Energy Management and Efficiency for the Process Industries

Author: Alan P. Rossiter

Publisher: John Wiley & Sons

Published: 2015-03-25

Total Pages: 400

ISBN-13: 111903339X

DOWNLOAD EBOOK

Provides a unique overview of energy management for the process industries Provides an overall approach to energy management and places the technical issues that drive energy efficiency in context Combines the perspectives of freewheeling consultants and corporate insiders In two sections, the book provides the organizational framework (Section 1) within which the technical aspects of energy management, described in Section 2, can be most effectively executed Includes success stories from three very different companies that have achieved excellence in their energy management efforts Covers energy management, including the role of the energy manager, designing and implementing energy management programs, energy benchmarking, reporting, and energy management systems Technical topics cover efficiency improvement opportunities in a wide range of utility systems and process equipment types, as well as techniques to improve process design and operation


Book Synopsis Energy Management and Efficiency for the Process Industries by : Alan P. Rossiter

Download or read book Energy Management and Efficiency for the Process Industries written by Alan P. Rossiter and published by John Wiley & Sons. This book was released on 2015-03-25 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a unique overview of energy management for the process industries Provides an overall approach to energy management and places the technical issues that drive energy efficiency in context Combines the perspectives of freewheeling consultants and corporate insiders In two sections, the book provides the organizational framework (Section 1) within which the technical aspects of energy management, described in Section 2, can be most effectively executed Includes success stories from three very different companies that have achieved excellence in their energy management efforts Covers energy management, including the role of the energy manager, designing and implementing energy management programs, energy benchmarking, reporting, and energy management systems Technical topics cover efficiency improvement opportunities in a wide range of utility systems and process equipment types, as well as techniques to improve process design and operation

Multiphase Mixing in the Process Industries

Multiphase Mixing in the Process Industries

Author: Amna Jamshed

Publisher:

Published: 2019

Total Pages:

ISBN-13:

DOWNLOAD EBOOK


Book Synopsis Multiphase Mixing in the Process Industries by : Amna Jamshed

Download or read book Multiphase Mixing in the Process Industries written by Amna Jamshed and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: