Download Modeling And Simulation In Industrial Engineering full books in PDF, epub, and Kindle. Read online Modeling And Simulation In Industrial Engineering ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
This book describes the latest research developments in modeling and simulation in industrial engineering. Topics such as decision and performance analysis and industrial control systems are described. Case studies in industry and services as well as engineering economy and cost estimation are also covered.
Book Synopsis Modeling and Simulation in Industrial Engineering by : Mangey Ram
Download or read book Modeling and Simulation in Industrial Engineering written by Mangey Ram and published by Springer. This book was released on 2017-08-11 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the latest research developments in modeling and simulation in industrial engineering. Topics such as decision and performance analysis and industrial control systems are described. Case studies in industry and services as well as engineering economy and cost estimation are also covered.
This book describes the latest research developments in modeling and simulation in industrial engineering. Topics such as decision and performance analysis and industrial control systems are described. Case studies in industry and services as well as engineering economy and cost estimation are also covered.
Book Synopsis Modeling and Simulation in Industrial Engineering by : Mangey Ram
Download or read book Modeling and Simulation in Industrial Engineering written by Mangey Ram and published by Springer. This book was released on 2018-08-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the latest research developments in modeling and simulation in industrial engineering. Topics such as decision and performance analysis and industrial control systems are described. Case studies in industry and services as well as engineering economy and cost estimation are also covered.
Computer modeling and simulation (M&S) allows engineers to study and analyze complex systems. Discrete-event system (DES)-M&S is used in modern management, industrial engineering, computer science, and the military. As computer speeds and memory capacity increase, so DES-M&S tools become more powerful and more widely used in solving real-life problems. Based on over 20 years of evolution within a classroom environment, as well as on decades-long experience in developing simulation-based solutions for high-tech industries, Modeling and Simulation of Discrete-Event Systems is the only book on DES-M&S in which all the major DES modeling formalisms – activity-based, process-oriented, state-based, and event-based – are covered in a unified manner: A well-defined procedure for building a formal model in the form of event graph, ACD, or state graph Diverse types of modeling templates and examples that can be used as building blocks for a complex, real-life model A systematic, easy-to-follow procedure combined with sample C# codes for developing simulators in various modeling formalisms Simple tutorials as well as sample model files for using popular off-the-shelf simulators such as SIGMA®, ACE®, and Arena® Up-to-date research results as well as research issues and directions in DES-M&S Modeling and Simulation of Discrete-Event Systems is an ideal textbook for undergraduate and graduate students of simulation/industrial engineering and computer science, as well as for simulation practitioners and researchers.
Book Synopsis Modeling and Simulation of Discrete Event Systems by : Byoung Kyu Choi
Download or read book Modeling and Simulation of Discrete Event Systems written by Byoung Kyu Choi and published by John Wiley & Sons. This book was released on 2013-08-07 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer modeling and simulation (M&S) allows engineers to study and analyze complex systems. Discrete-event system (DES)-M&S is used in modern management, industrial engineering, computer science, and the military. As computer speeds and memory capacity increase, so DES-M&S tools become more powerful and more widely used in solving real-life problems. Based on over 20 years of evolution within a classroom environment, as well as on decades-long experience in developing simulation-based solutions for high-tech industries, Modeling and Simulation of Discrete-Event Systems is the only book on DES-M&S in which all the major DES modeling formalisms – activity-based, process-oriented, state-based, and event-based – are covered in a unified manner: A well-defined procedure for building a formal model in the form of event graph, ACD, or state graph Diverse types of modeling templates and examples that can be used as building blocks for a complex, real-life model A systematic, easy-to-follow procedure combined with sample C# codes for developing simulators in various modeling formalisms Simple tutorials as well as sample model files for using popular off-the-shelf simulators such as SIGMA®, ACE®, and Arena® Up-to-date research results as well as research issues and directions in DES-M&S Modeling and Simulation of Discrete-Event Systems is an ideal textbook for undergraduate and graduate students of simulation/industrial engineering and computer science, as well as for simulation practitioners and researchers.
A complete introduction to the field of discrete simulation; examining both the generic background material necessary to perform any simulation project and complete documentation for the new network-based simulation language SIMNET.
Book Synopsis Simulation Modeling and SIMNET by : Hamdy A. Taha
Download or read book Simulation Modeling and SIMNET written by Hamdy A. Taha and published by . This book was released on 1988 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete introduction to the field of discrete simulation; examining both the generic background material necessary to perform any simulation project and complete documentation for the new network-based simulation language SIMNET.
Modeling, in the past 60 years, has been constantly evolving and has revolutionized the industrial sector. Its continuous development will still have profound impact in the upcoming future. For big or small companies, modeling is a tool which brings technical improvement and profitability. What is modeling? What are the benefits and limits? What are the best practices, technical and non-technical, to apply? The objective of this book is to bring answers to these questions in a synthetic and transversal manner, so that engineers, managers and directors can see future challenges not as a threat, but as an opportunity. Features: Transversal and synthetic view on modeling, written in a clear and pragmatic way Technical best practices to build/ develop a model Non-technical best practices to efficiently deploy modeling in companies All best practices discussed in the book have been truly already implemented in past situations Theory is illustrated in a case study from the beginning to the end of the book
Book Synopsis Modeling and Simulation by : Guillaume Dubois
Download or read book Modeling and Simulation written by Guillaume Dubois and published by CRC Press. This book was released on 2018-03-22 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling, in the past 60 years, has been constantly evolving and has revolutionized the industrial sector. Its continuous development will still have profound impact in the upcoming future. For big or small companies, modeling is a tool which brings technical improvement and profitability. What is modeling? What are the benefits and limits? What are the best practices, technical and non-technical, to apply? The objective of this book is to bring answers to these questions in a synthetic and transversal manner, so that engineers, managers and directors can see future challenges not as a threat, but as an opportunity. Features: Transversal and synthetic view on modeling, written in a clear and pragmatic way Technical best practices to build/ develop a model Non-technical best practices to efficiently deploy modeling in companies All best practices discussed in the book have been truly already implemented in past situations Theory is illustrated in a case study from the beginning to the end of the book
Since the publication of the first edition in 1982, the goal of Simulation Modeling and Analysis has always been to provide a comprehensive, state-of-the-art, and technically correct treatment of all important aspects of a simulation study. The book strives to make this material understandable by the use of intuition and numerous figures, examples, and problems. It is equally well suited for use in university courses, simulation practice, and self study. The book is widely regarded as the “bible” of simulation and now has more than 100,000 copies in print. The book can serve as the primary text for a variety of courses; for example: • A first course in simulation at the junior, senior, or beginning-graduate-student level in engineering, manufacturing, business, or computer science (Chaps. 1 through 4, and parts of Chaps. 5 through 9). At the end of such a course, the students will be prepared to carry out complete and effective simulation studies, and to take advanced simulation courses. • A second course in simulation for graduate students in any of the above disciplines (most of Chaps. 5 through 12). After completing this course, the student should be familiar with the more advanced methodological issues involved in a simulation study, and should be prepared to understand and conduct simulation research. • An introduction to simulation as part of a general course in operations research or management science (part of Chaps. 1, 3, 5, 6, and 9).
Book Synopsis Simulation Modeling and Analysis with Expertfit Software by : Averill Law
Download or read book Simulation Modeling and Analysis with Expertfit Software written by Averill Law and published by McGraw-Hill Science/Engineering/Math. This book was released on 2006-07-21 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of the first edition in 1982, the goal of Simulation Modeling and Analysis has always been to provide a comprehensive, state-of-the-art, and technically correct treatment of all important aspects of a simulation study. The book strives to make this material understandable by the use of intuition and numerous figures, examples, and problems. It is equally well suited for use in university courses, simulation practice, and self study. The book is widely regarded as the “bible” of simulation and now has more than 100,000 copies in print. The book can serve as the primary text for a variety of courses; for example: • A first course in simulation at the junior, senior, or beginning-graduate-student level in engineering, manufacturing, business, or computer science (Chaps. 1 through 4, and parts of Chaps. 5 through 9). At the end of such a course, the students will be prepared to carry out complete and effective simulation studies, and to take advanced simulation courses. • A second course in simulation for graduate students in any of the above disciplines (most of Chaps. 5 through 12). After completing this course, the student should be familiar with the more advanced methodological issues involved in a simulation study, and should be prepared to understand and conduct simulation research. • An introduction to simulation as part of a general course in operations research or management science (part of Chaps. 1, 3, 5, 6, and 9).
The capability modeling and simulation (M&S) supplies for managing systems complexity and investigating systems behaviors has made it a central activity in the development of new and existing systems. However, a handbook that provides established M&S practices has not been available. Until now. Modeling and Simulation-Based Systems Engineering Handbook details the M&S practices for supporting systems engineering in diverse domains. It discusses how you can identify systems engineering needs and adapt these practices to suit specific application domains, thus avoiding redefining practices from scratch. Although M&S practices are used and embedded within individual disciplines, they are often developed in isolation. However, they address recurring problems common to all disciplines. The editors of this book tackled the challenge by recruiting key representatives from several communities, harmonizing the different perspectives derived from individual backgrounds, and lining them up with the book’s vision. The result is a collection of M&S systems engineering examples that offer an initial means for cross-domain capitalization of the knowledge, methodologies, and technologies developed in several communities. These examples provide the pros and cons of the methods and techniques available, lessons learned, and pitfalls to avoid. As our society moves further in the information era, knowledge and M&S capabilities become key enablers for the engineering of complex systems and systems of systems. Therefore, knowledge and M&S methodologies and technologies become valuable output in an engineering activity, and their cross-domain capitalization is key to further advance the future practices in systems engineering. This book collates information across disciplines to provide you with the tools to more efficiently design and manage complex systems that achieve their goals.
Book Synopsis Modeling and Simulation-Based Systems Engineering Handbook by : Daniele Gianni
Download or read book Modeling and Simulation-Based Systems Engineering Handbook written by Daniele Gianni and published by CRC Press. This book was released on 2014-12-02 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: The capability modeling and simulation (M&S) supplies for managing systems complexity and investigating systems behaviors has made it a central activity in the development of new and existing systems. However, a handbook that provides established M&S practices has not been available. Until now. Modeling and Simulation-Based Systems Engineering Handbook details the M&S practices for supporting systems engineering in diverse domains. It discusses how you can identify systems engineering needs and adapt these practices to suit specific application domains, thus avoiding redefining practices from scratch. Although M&S practices are used and embedded within individual disciplines, they are often developed in isolation. However, they address recurring problems common to all disciplines. The editors of this book tackled the challenge by recruiting key representatives from several communities, harmonizing the different perspectives derived from individual backgrounds, and lining them up with the book’s vision. The result is a collection of M&S systems engineering examples that offer an initial means for cross-domain capitalization of the knowledge, methodologies, and technologies developed in several communities. These examples provide the pros and cons of the methods and techniques available, lessons learned, and pitfalls to avoid. As our society moves further in the information era, knowledge and M&S capabilities become key enablers for the engineering of complex systems and systems of systems. Therefore, knowledge and M&S methodologies and technologies become valuable output in an engineering activity, and their cross-domain capitalization is key to further advance the future practices in systems engineering. This book collates information across disciplines to provide you with the tools to more efficiently design and manage complex systems that achieve their goals.
Emphasizes a hands-on approach to learning statistical analysis and model building through the use of comprehensive examples, problems sets, and software applications With a unique blend of theory and applications, Simulation Modeling and Arena®, Second Edition integrates coverage of statistical analysis and model building to emphasize the importance of both topics in simulation. Featuring introductory coverage on how simulation works and why it matters, the Second Edition expands coverage on static simulation and the applications of spreadsheets to perform simulation. The new edition also introduces the use of the open source statistical package, R, for both performing statistical testing and fitting distributions. In addition, the models are presented in a clear and precise pseudo-code form, which aids in understanding and model communication. Simulation Modeling and Arena, Second Edition also features: Updated coverage of necessary statistical modeling concepts such as confidence interval construction, hypothesis testing, and parameter estimation Additional examples of the simulation clock within discrete event simulation modeling involving the mechanics of time advancement by hand simulation A guide to the Arena Run Controller, which features a debugging scenario New homework problems that cover a wider range of engineering applications in transportation, logistics, healthcare, and computer science A related website with an Instructor’s Solutions Manual, PowerPoint® slides, test bank questions, and data sets for each chapter Simulation Modeling and Arena, Second Edition is an ideal textbook for upper-undergraduate and graduate courses in modeling and simulation within statistics, mathematics, industrial and civil engineering, construction management, business, computer science, and other departments where simulation is practiced. The book is also an excellent reference for professionals interested in mathematical modeling, simulation, and Arena.
Book Synopsis Simulation Modeling and Arena by : Manuel D. Rossetti
Download or read book Simulation Modeling and Arena written by Manuel D. Rossetti and published by John Wiley & Sons. This book was released on 2015-05-26 with total page 746 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasizes a hands-on approach to learning statistical analysis and model building through the use of comprehensive examples, problems sets, and software applications With a unique blend of theory and applications, Simulation Modeling and Arena®, Second Edition integrates coverage of statistical analysis and model building to emphasize the importance of both topics in simulation. Featuring introductory coverage on how simulation works and why it matters, the Second Edition expands coverage on static simulation and the applications of spreadsheets to perform simulation. The new edition also introduces the use of the open source statistical package, R, for both performing statistical testing and fitting distributions. In addition, the models are presented in a clear and precise pseudo-code form, which aids in understanding and model communication. Simulation Modeling and Arena, Second Edition also features: Updated coverage of necessary statistical modeling concepts such as confidence interval construction, hypothesis testing, and parameter estimation Additional examples of the simulation clock within discrete event simulation modeling involving the mechanics of time advancement by hand simulation A guide to the Arena Run Controller, which features a debugging scenario New homework problems that cover a wider range of engineering applications in transportation, logistics, healthcare, and computer science A related website with an Instructor’s Solutions Manual, PowerPoint® slides, test bank questions, and data sets for each chapter Simulation Modeling and Arena, Second Edition is an ideal textbook for upper-undergraduate and graduate courses in modeling and simulation within statistics, mathematics, industrial and civil engineering, construction management, business, computer science, and other departments where simulation is practiced. The book is also an excellent reference for professionals interested in mathematical modeling, simulation, and Arena.
This practical book presents fundamental concepts and issues in computer modeling and simulation (M&S) in a simple and practical way for engineers, scientists, and managers who wish to apply simulation successfully to their real-world problems. It offers a concise approach to the coverage of generic (tool-independent) M&S concepts and enables engineering practitioners to easily learn, evaluate, and apply various available simulation concepts. Worked out examples are included to illustrate the concepts and an example modeling application is continued throughout the chapters to demonstrate the techniques. The book discusses modeling purposes, scoping a model, levels of modeling abstraction, the benefits and cost of including randomness, types of simulation, and statistical techniques. It also includes a chapter on modeling and simulation projects and how to conduct them for customer and engineer benefit and covers the stages of a modeling and simulation study, including process and system investigation, data collection, modeling scoping and production, model verification and validation, experimentation, and analysis of results.
Book Synopsis What Every Engineer Should Know About Modeling and Simulation by : Raymond J. Madachy
Download or read book What Every Engineer Should Know About Modeling and Simulation written by Raymond J. Madachy and published by CRC Press. This book was released on 2017-09-01 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical book presents fundamental concepts and issues in computer modeling and simulation (M&S) in a simple and practical way for engineers, scientists, and managers who wish to apply simulation successfully to their real-world problems. It offers a concise approach to the coverage of generic (tool-independent) M&S concepts and enables engineering practitioners to easily learn, evaluate, and apply various available simulation concepts. Worked out examples are included to illustrate the concepts and an example modeling application is continued throughout the chapters to demonstrate the techniques. The book discusses modeling purposes, scoping a model, levels of modeling abstraction, the benefits and cost of including randomness, types of simulation, and statistical techniques. It also includes a chapter on modeling and simulation projects and how to conduct them for customer and engineer benefit and covers the stages of a modeling and simulation study, including process and system investigation, data collection, modeling scoping and production, model verification and validation, experimentation, and analysis of results.
Recent developments in reliability engineering has become the most challenging and demanding area of research. Modeling and Simulation, along with System Reliability Engineering has become a greater issue because of high-tech industrial processes, using more complex systems today. This book gives the latest research advances in the field of modeling and simulation, based on analysis in engineering sciences. Features Focuses on the latest research in modeling and simulation based analysis in reliability engineering. Covers performance evaluation of complex engineering systems Identifies and fills the gaps of knowledge pertaining to engineering applications Provides insights on an international and transnational scale Modeling and Simulation Based Analysis in Reliability Engineering aims at providing a reference for applications of mathematics in engineering, offering a theoretical sound background with adequate case studies, and will be of interest to researchers, practitioners, and academics.
Book Synopsis Modeling and Simulation Based Analysis in Reliability Engineering by : Mangey Ram
Download or read book Modeling and Simulation Based Analysis in Reliability Engineering written by Mangey Ram and published by CRC Press. This book was released on 2018-07-18 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent developments in reliability engineering has become the most challenging and demanding area of research. Modeling and Simulation, along with System Reliability Engineering has become a greater issue because of high-tech industrial processes, using more complex systems today. This book gives the latest research advances in the field of modeling and simulation, based on analysis in engineering sciences. Features Focuses on the latest research in modeling and simulation based analysis in reliability engineering. Covers performance evaluation of complex engineering systems Identifies and fills the gaps of knowledge pertaining to engineering applications Provides insights on an international and transnational scale Modeling and Simulation Based Analysis in Reliability Engineering aims at providing a reference for applications of mathematics in engineering, offering a theoretical sound background with adequate case studies, and will be of interest to researchers, practitioners, and academics.
