Download Proceedings Of The 6th Ieee Acm Ifip International Conference On Hardware Software Codesign And System Synthesis full books in PDF, epub, and Kindle. Read online Proceedings Of The 6th Ieee Acm Ifip International Conference On Hardware Software Codesign And System Synthesis ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
Book Synopsis Proceedings of the 6th Ieee/Acm/Ifip International Conference on Hardware/Software Codesign and System Synthesis by : Catherine Gebotys
Download or read book Proceedings of the 6th Ieee/Acm/Ifip International Conference on Hardware/Software Codesign and System Synthesis written by Catherine Gebotys and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
ESWeek '10: Sixth Embedded Systems Week Oct 28, 2010-Oct 28, 2010 Scottsdale, USA. You can view more information about this proceeding and all of ACMs other published conference proceedings from the ACM Digital Library: http://www.acm.org/dl.
Book Synopsis Proceedings of the Eighth Ieee/Acm/Ifip International Conference on Hardware/Software Codesign and System Synthesis by : Association for Computing Machinery
Download or read book Proceedings of the Eighth Ieee/Acm/Ifip International Conference on Hardware/Software Codesign and System Synthesis written by Association for Computing Machinery and published by . This book was released on 2010-10-28 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: ESWeek '10: Sixth Embedded Systems Week Oct 28, 2010-Oct 28, 2010 Scottsdale, USA. You can view more information about this proceeding and all of ACMs other published conference proceedings from the ACM Digital Library: http://www.acm.org/dl.
Book Synopsis Proceedings of the IEEE/ACM/IFIP International Conference on Hardware/software Codesign and System Synthesis by :
Download or read book Proceedings of the IEEE/ACM/IFIP International Conference on Hardware/software Codesign and System Synthesis written by and published by . This book was released on 1994 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
This book describes analytical models and estimation methods to enhance performance estimation of pipelined multiprocessor systems-on-chip (MPSoCs). A framework is introduced for both design-time and run-time optimizations. For design space exploration, several algorithms are presented to minimize the area footprint of a pipelined MPSoC under a latency or a throughput constraint. A novel adaptive pipelined MPSoC architecture is described, where idle processors are transitioned into low-power states at run-time to reduce energy consumption. Multi-mode pipelined MPSoCs are introduced, where multiple pipelined MPSoCs optimized separately are merged into a single pipelined MPSoC, enabling further reduction of the area footprint by sharing the processors and communication buffers. Readers will benefit from the authors’ combined use of analytical models, estimation methods and exploration algorithms and will be enabled to explore billions of design points in a few minutes.
Book Synopsis Pipelined Multiprocessor System-on-Chip for Multimedia by : Haris Javaid
Download or read book Pipelined Multiprocessor System-on-Chip for Multimedia written by Haris Javaid and published by Springer Science & Business Media. This book was released on 2013-11-26 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes analytical models and estimation methods to enhance performance estimation of pipelined multiprocessor systems-on-chip (MPSoCs). A framework is introduced for both design-time and run-time optimizations. For design space exploration, several algorithms are presented to minimize the area footprint of a pipelined MPSoC under a latency or a throughput constraint. A novel adaptive pipelined MPSoC architecture is described, where idle processors are transitioned into low-power states at run-time to reduce energy consumption. Multi-mode pipelined MPSoCs are introduced, where multiple pipelined MPSoCs optimized separately are merged into a single pipelined MPSoC, enabling further reduction of the area footprint by sharing the processors and communication buffers. Readers will benefit from the authors’ combined use of analytical models, estimation methods and exploration algorithms and will be enabled to explore billions of design points in a few minutes.
"This book has collected the latest research within the field of real-time systems engineering, and will serve as a vital reference compendium for practitioners and academics"--Provided by publisher.
Book Synopsis Innovations in Embedded and Real-Time Systems Engineering for Communication by : Virtanen, Seppo
Download or read book Innovations in Embedded and Real-Time Systems Engineering for Communication written by Virtanen, Seppo and published by IGI Global. This book was released on 2012-04-30 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book has collected the latest research within the field of real-time systems engineering, and will serve as a vital reference compendium for practitioners and academics"--Provided by publisher.
Book Synopsis Proceedings of the Eighth IEEE/ACM/IFIP International Conference on Hardware/software Codesign and System Synthesis by : Ahmed Jerraya
Download or read book Proceedings of the Eighth IEEE/ACM/IFIP International Conference on Hardware/software Codesign and System Synthesis written by Ahmed Jerraya and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Quality Electronic Design (QED)’s landscape spans a vast region where territories of many participating disciplines and technologies overlap. This book explores the latest trends in several key topics related to quality electronic design, with emphasis on Hardware Security, Cybersecurity, Machine Learning, and application of Artificial Intelligence (AI). The book includes topics in nonvolatile memories (NVM), Internet of Things (IoT), FPGA, and Neural Networks.
Book Synopsis Frontiers of Quality Electronic Design (QED) by : Ali Iranmanesh
Download or read book Frontiers of Quality Electronic Design (QED) written by Ali Iranmanesh and published by Springer Nature. This book was released on 2023-01-11 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quality Electronic Design (QED)’s landscape spans a vast region where territories of many participating disciplines and technologies overlap. This book explores the latest trends in several key topics related to quality electronic design, with emphasis on Hardware Security, Cybersecurity, Machine Learning, and application of Artificial Intelligence (AI). The book includes topics in nonvolatile memories (NVM), Internet of Things (IoT), FPGA, and Neural Networks.
The five-volume set LNCS 11536, 11537, 11538, 11539 and 11540 constitutes the proceedings of the 19th International Conference on Computational Science, ICCS 2019, held in Faro, Portugal, in June 2019. The total of 65 full papers and 168 workshop papers presented in this book set were carefully reviewed and selected from 573 submissions (228 submissions to the main track and 345 submissions to the workshops). The papers were organized in topical sections named: Part I: ICCS Main Track Part II: ICCS Main Track; Track of Advances in High-Performance Computational Earth Sciences: Applications and Frameworks; Track of Agent-Based Simulations, Adaptive Algorithms and Solvers; Track of Applications of Matrix Methods in Artificial Intelligence and Machine Learning; Track of Architecture, Languages, Compilation and Hardware Support for Emerging and Heterogeneous Systems Part III: Track of Biomedical and Bioinformatics Challenges for Computer Science; Track of Classifier Learning from Difficult Data; Track of Computational Finance and Business Intelligence; Track of Computational Optimization, Modelling and Simulation; Track of Computational Science in IoT and Smart Systems Part IV: Track of Data-Driven Computational Sciences; Track of Machine Learning and Data Assimilation for Dynamical Systems; Track of Marine Computing in the Interconnected World for the Benefit of the Society; Track of Multiscale Modelling and Simulation; Track of Simulations of Flow and Transport: Modeling, Algorithms and Computation Part V: Track of Smart Systems: Computer Vision, Sensor Networks and Machine Learning; Track of Solving Problems with Uncertainties; Track of Teaching Computational Science; Poster Track ICCS 2019 Chapter “Comparing Domain-decomposition Methods for the Parallelization of Distributed Land Surface Models” is available open access under a Creative Commons Attribution 4.0 International License via link.springer.com.
Book Synopsis Computational Science – ICCS 2019 by : João M. F. Rodrigues
Download or read book Computational Science – ICCS 2019 written by João M. F. Rodrigues and published by Springer. This book was released on 2019-06-07 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: The five-volume set LNCS 11536, 11537, 11538, 11539 and 11540 constitutes the proceedings of the 19th International Conference on Computational Science, ICCS 2019, held in Faro, Portugal, in June 2019. The total of 65 full papers and 168 workshop papers presented in this book set were carefully reviewed and selected from 573 submissions (228 submissions to the main track and 345 submissions to the workshops). The papers were organized in topical sections named: Part I: ICCS Main Track Part II: ICCS Main Track; Track of Advances in High-Performance Computational Earth Sciences: Applications and Frameworks; Track of Agent-Based Simulations, Adaptive Algorithms and Solvers; Track of Applications of Matrix Methods in Artificial Intelligence and Machine Learning; Track of Architecture, Languages, Compilation and Hardware Support for Emerging and Heterogeneous Systems Part III: Track of Biomedical and Bioinformatics Challenges for Computer Science; Track of Classifier Learning from Difficult Data; Track of Computational Finance and Business Intelligence; Track of Computational Optimization, Modelling and Simulation; Track of Computational Science in IoT and Smart Systems Part IV: Track of Data-Driven Computational Sciences; Track of Machine Learning and Data Assimilation for Dynamical Systems; Track of Marine Computing in the Interconnected World for the Benefit of the Society; Track of Multiscale Modelling and Simulation; Track of Simulations of Flow and Transport: Modeling, Algorithms and Computation Part V: Track of Smart Systems: Computer Vision, Sensor Networks and Machine Learning; Track of Solving Problems with Uncertainties; Track of Teaching Computational Science; Poster Track ICCS 2019 Chapter “Comparing Domain-decomposition Methods for the Parallelization of Distributed Land Surface Models” is available open access under a Creative Commons Attribution 4.0 International License via link.springer.com.
The demands of increasingly complex embedded systems and associated performance computations have resulted in the development of heterogeneous computing architectures that often integrate several types of processors, analog and digital electronic components, and mechanical and optical components—all on a single chip. As a result, now the most prominent challenge for the design automation community is to efficiently plan for such heterogeneity and to fully exploit its capabilities. A compilation of work from internationally renowned authors, Model-Based Design for Embedded Systems elaborates on related practices and addresses the main facets of heterogeneous model-based design for embedded systems, including the current state of the art, important challenges, and the latest trends. Focusing on computational models as the core design artifact, this book presents the cutting-edge results that have helped establish model-based design and continue to expand its parameters. The book is organized into three sections: Real-Time and Performance Analysis in Heterogeneous Embedded Systems, Design Tools and Methodology for Multiprocessor System-on-Chip, and Design Tools and Methodology for Multidomain Embedded Systems. The respective contributors share their considerable expertise on the automation of design refinement and how to relate properties throughout this refinement while enabling analytic and synthetic qualities. They focus on multi-core methodological issues, real-time analysis, and modeling and validation, taking into account how optical, electronic, and mechanical components often interface. Model-based design is emerging as a solution to bridge the gap between the availability of computational capabilities and our inability to make full use of them yet. This approach enables teams to start the design process using a high-level model that is gradually refined through abstraction levels to ultimately yield a prototype. When executed well, model-based design encourages enhanced performance and quicker time to market for a product. Illustrating a broad and diverse spectrum of applications such as in the automotive aerospace, health care, consumer electronics, this volume provides designers with practical, readily adaptable modeling solutions for their own practice.
Book Synopsis Model-Based Design for Embedded Systems by : Gabriela Nicolescu
Download or read book Model-Based Design for Embedded Systems written by Gabriela Nicolescu and published by CRC Press. This book was released on 2018-09-03 with total page 764 pages. Available in PDF, EPUB and Kindle. Book excerpt: The demands of increasingly complex embedded systems and associated performance computations have resulted in the development of heterogeneous computing architectures that often integrate several types of processors, analog and digital electronic components, and mechanical and optical components—all on a single chip. As a result, now the most prominent challenge for the design automation community is to efficiently plan for such heterogeneity and to fully exploit its capabilities. A compilation of work from internationally renowned authors, Model-Based Design for Embedded Systems elaborates on related practices and addresses the main facets of heterogeneous model-based design for embedded systems, including the current state of the art, important challenges, and the latest trends. Focusing on computational models as the core design artifact, this book presents the cutting-edge results that have helped establish model-based design and continue to expand its parameters. The book is organized into three sections: Real-Time and Performance Analysis in Heterogeneous Embedded Systems, Design Tools and Methodology for Multiprocessor System-on-Chip, and Design Tools and Methodology for Multidomain Embedded Systems. The respective contributors share their considerable expertise on the automation of design refinement and how to relate properties throughout this refinement while enabling analytic and synthetic qualities. They focus on multi-core methodological issues, real-time analysis, and modeling and validation, taking into account how optical, electronic, and mechanical components often interface. Model-based design is emerging as a solution to bridge the gap between the availability of computational capabilities and our inability to make full use of them yet. This approach enables teams to start the design process using a high-level model that is gradually refined through abstraction levels to ultimately yield a prototype. When executed well, model-based design encourages enhanced performance and quicker time to market for a product. Illustrating a broad and diverse spectrum of applications such as in the automotive aerospace, health care, consumer electronics, this volume provides designers with practical, readily adaptable modeling solutions for their own practice.
This volume contains the 37 papers presented at the 9th International Con- rence on Real-Time and Embedded Computing Systems and Applications (RT- CSA 2003). RTCSA is an international conference organized for scientists and researchers from both academia and industry to hold intensive discussions on advancing technologies topics on real-time systems, embedded systems, ubiq- tous/pervasive computing, and related topics. RTCSA 2003 was held at the Department of Electrical Engineering of National Cheng Kung University in Taiwan. Paper submissions were well distributed over the various aspects of real-time computing and embedded system technologies. There were more than 100 participants from all over the world. The papers, including 28 regular papers and 9 short papers are grouped into thecategoriesofscheduling,networkingandcommunication,embeddedsystems, pervasive/ubiquitous computing, systems and architectures, resource mana- ment, ?le systems and databases, performance analysis, and tools and de- lopment. The grouping is basically in accordance with the conference program. Earlier versions of these papers were published in the conference proceedings. However, some papers in this volume have been modi?ed or improved by the authors, in various aspects, based on comments and feedback received at the conference. It is our sincere hope that researchers and developers will bene?t from these papers. We would like to thank all the authors of the papers for their contribution. We thank the members of the program committee and the reviewers for their excellent work in evaluating the submissions. We are also very grateful to all the members of the organizing committees for their help, guidance and support.
Book Synopsis Real-Time and Embedded Computing Systems and Applications by : Jing Chen
Download or read book Real-Time and Embedded Computing Systems and Applications written by Jing Chen and published by Springer. This book was released on 2004-04-08 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the 37 papers presented at the 9th International Con- rence on Real-Time and Embedded Computing Systems and Applications (RT- CSA 2003). RTCSA is an international conference organized for scientists and researchers from both academia and industry to hold intensive discussions on advancing technologies topics on real-time systems, embedded systems, ubiq- tous/pervasive computing, and related topics. RTCSA 2003 was held at the Department of Electrical Engineering of National Cheng Kung University in Taiwan. Paper submissions were well distributed over the various aspects of real-time computing and embedded system technologies. There were more than 100 participants from all over the world. The papers, including 28 regular papers and 9 short papers are grouped into thecategoriesofscheduling,networkingandcommunication,embeddedsystems, pervasive/ubiquitous computing, systems and architectures, resource mana- ment, ?le systems and databases, performance analysis, and tools and de- lopment. The grouping is basically in accordance with the conference program. Earlier versions of these papers were published in the conference proceedings. However, some papers in this volume have been modi?ed or improved by the authors, in various aspects, based on comments and feedback received at the conference. It is our sincere hope that researchers and developers will bene?t from these papers. We would like to thank all the authors of the papers for their contribution. We thank the members of the program committee and the reviewers for their excellent work in evaluating the submissions. We are also very grateful to all the members of the organizing committees for their help, guidance and support.