District Heating and Cooling Networks in the European Union

District Heating and Cooling Networks in the European Union

Author: Antonio Colmenar-Santos

Publisher: Springer

Published: 2017-07-18

Total Pages: 149

ISBN-13: 3319579525

DOWNLOAD EBOOK

This book evaluates the potential of the combined use of district heating networks and cogeneration in the European Union (EU). It also proposes measures to remove barriers hindering their widespread implementation, formulates policies for their implementation, and evaluates their economic, energy, and environmental consequences. The book presents a preliminary assessment of the likely cost and the impact of widespread adoption of district heating networks and cogeneration carried out in three cities that represent the variety of climatic conditions in the EU. Based on this assessment, it is estimated that by undertaking the maximum economically feasible implementation across the EU, fuel savings of €95M/year would be achieved, representing energy savings of 6,400 petajoules (PJ), which is around 15% of the total final energy consumption in the EU in 2013 (46,214.5 PJ). Using simple and quick calculations and not specific software, the method used allows the evaluation of the potential benefits of retrofitting existing power plants into cogeneration plants and connecting them to nearby heating networks. In light of increasing energy costs and environmental concerns, the book is of interest to heating engineers, city planners, and policy-makers around the globe.


Book Synopsis District Heating and Cooling Networks in the European Union by : Antonio Colmenar-Santos

Download or read book District Heating and Cooling Networks in the European Union written by Antonio Colmenar-Santos and published by Springer. This book was released on 2017-07-18 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book evaluates the potential of the combined use of district heating networks and cogeneration in the European Union (EU). It also proposes measures to remove barriers hindering their widespread implementation, formulates policies for their implementation, and evaluates their economic, energy, and environmental consequences. The book presents a preliminary assessment of the likely cost and the impact of widespread adoption of district heating networks and cogeneration carried out in three cities that represent the variety of climatic conditions in the EU. Based on this assessment, it is estimated that by undertaking the maximum economically feasible implementation across the EU, fuel savings of €95M/year would be achieved, representing energy savings of 6,400 petajoules (PJ), which is around 15% of the total final energy consumption in the EU in 2013 (46,214.5 PJ). Using simple and quick calculations and not specific software, the method used allows the evaluation of the potential benefits of retrofitting existing power plants into cogeneration plants and connecting them to nearby heating networks. In light of increasing energy costs and environmental concerns, the book is of interest to heating engineers, city planners, and policy-makers around the globe.


Renewable Energy in District Heating and Cooling

Renewable Energy in District Heating and Cooling

Author: International Renewable Energy Agency (IRENA)

Publisher:

Published: 2017-03-04

Total Pages: 112

ISBN-13: 9789292600167

DOWNLOAD EBOOK

District heating and cooling (DHC) combined with renewable energy sources can help meet rising urban energy needs, improve efficiency, reduce emissions and improve local air quality. Although currently dominated by fossil fuels such as coal and gas, DHC systems can be upgraded, or new networks created, to use solid biofuel, solar and geothermal energy technologies. Depending on local conditions, renewable-based DHC brings a range of benefits, including increased energy security, improved health and reduced climate impact.To date, only a few countries have taken advantage of their renewable resource potential for DHC or created policies to promote further uptake. Sweden and Switzerland have started promoting renewable-based district heating,while Denmark - with ambitious decarbonisation policies -already uses high shares. Many cities and regions envisage a growing role for district in their energy plans; some are also looking increasingly at district cooling.As this REmap sector study from the International Renewable Energy Agency (IRENA) shows, renewables could feasibly supply more than one fifth of the energy needed for DHC worldwide. But to drive the transition, policy makers need to fully understand the costs, bene¿ts and actual potential for renewable-based DHC.


Book Synopsis Renewable Energy in District Heating and Cooling by : International Renewable Energy Agency (IRENA)

Download or read book Renewable Energy in District Heating and Cooling written by International Renewable Energy Agency (IRENA) and published by . This book was released on 2017-03-04 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: District heating and cooling (DHC) combined with renewable energy sources can help meet rising urban energy needs, improve efficiency, reduce emissions and improve local air quality. Although currently dominated by fossil fuels such as coal and gas, DHC systems can be upgraded, or new networks created, to use solid biofuel, solar and geothermal energy technologies. Depending on local conditions, renewable-based DHC brings a range of benefits, including increased energy security, improved health and reduced climate impact.To date, only a few countries have taken advantage of their renewable resource potential for DHC or created policies to promote further uptake. Sweden and Switzerland have started promoting renewable-based district heating,while Denmark - with ambitious decarbonisation policies -already uses high shares. Many cities and regions envisage a growing role for district in their energy plans; some are also looking increasingly at district cooling.As this REmap sector study from the International Renewable Energy Agency (IRENA) shows, renewables could feasibly supply more than one fifth of the energy needed for DHC worldwide. But to drive the transition, policy makers need to fully understand the costs, bene¿ts and actual potential for renewable-based DHC.


District Energy in Cities

District Energy in Cities

Author: United Nations Publications

Publisher: UN

Published: 2017-03-29

Total Pages: 137

ISBN-13: 9789211587326

DOWNLOAD EBOOK

This report identifies modern district energy as the most effective approach for many cities to transition to sustainable heating and cooling, by improving energy efficiency and enabling higher shares of renewables. This publication is one of the first reports to provide concrete policy, finance and technology best-practice recommendations on addressing the heating and cooling sectors in cities through energy efficiency improvements and the integration of renewables, both of which are central to the energy transition. These recommendations have been developed in collaboration with 45 champion cities, all of which use district energy, with 11 of them using it to achieve 100 per cent renewables or carbon-neutral targets.


Book Synopsis District Energy in Cities by : United Nations Publications

Download or read book District Energy in Cities written by United Nations Publications and published by UN. This book was released on 2017-03-29 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report identifies modern district energy as the most effective approach for many cities to transition to sustainable heating and cooling, by improving energy efficiency and enabling higher shares of renewables. This publication is one of the first reports to provide concrete policy, finance and technology best-practice recommendations on addressing the heating and cooling sectors in cities through energy efficiency improvements and the integration of renewables, both of which are central to the energy transition. These recommendations have been developed in collaboration with 45 champion cities, all of which use district energy, with 11 of them using it to achieve 100 per cent renewables or carbon-neutral targets.


Renewable Energy for Residential Heating and Cooling

Renewable Energy for Residential Heating and Cooling

Author:

Publisher: Routledge

Published: 2011

Total Pages: 266

ISBN-13: 1849712786

DOWNLOAD EBOOK

First Published in 2011. Routledge is an imprint of Taylor & Francis, an informa company.


Book Synopsis Renewable Energy for Residential Heating and Cooling by :

Download or read book Renewable Energy for Residential Heating and Cooling written by and published by Routledge. This book was released on 2011 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: First Published in 2011. Routledge is an imprint of Taylor & Francis, an informa company.


District Heating and Cooling Networks

District Heating and Cooling Networks

Author: Antonio Colmenar Santos

Publisher: MDPI

Published: 2020-05-12

Total Pages: 270

ISBN-13: 3039288393

DOWNLOAD EBOOK

Conventional thermal power generating plants reject a large amount of energy every year. If this rejected heat were to be used through district heating networks, given prior energy valorisation, there would be a noticeable decrease in the amount of fossil fuels imported for heating. As a consequence, benefits would be experienced in the form of an increase in energy efficiency, an improvement in energy security, and a minimisation of emitted greenhouse gases. Given that heat demand is not expected to decrease significantly in the medium term, district heating networks show the greatest potential for the development of cogeneration. Due to their cost competitiveness, flexibility in terms of the ability to use renewable energy resources (such as geothermal or solar thermal) and fossil fuels (more specifically the residual heat from combustion), and the fact that, in some cases, losses to a country/region’s energy balance can be easily integrated into district heating networks (which would not be the case in a “fully electric” future), district heating (and cooling) networks and cogeneration could become a key element for a future with greater energy security, while being more sustainable, if appropriate measures were implemented. This book therefore seeks to propose an energy strategy for a number of cities/regions/countries by proposing appropriate measures supported by detailed case studies.


Book Synopsis District Heating and Cooling Networks by : Antonio Colmenar Santos

Download or read book District Heating and Cooling Networks written by Antonio Colmenar Santos and published by MDPI. This book was released on 2020-05-12 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conventional thermal power generating plants reject a large amount of energy every year. If this rejected heat were to be used through district heating networks, given prior energy valorisation, there would be a noticeable decrease in the amount of fossil fuels imported for heating. As a consequence, benefits would be experienced in the form of an increase in energy efficiency, an improvement in energy security, and a minimisation of emitted greenhouse gases. Given that heat demand is not expected to decrease significantly in the medium term, district heating networks show the greatest potential for the development of cogeneration. Due to their cost competitiveness, flexibility in terms of the ability to use renewable energy resources (such as geothermal or solar thermal) and fossil fuels (more specifically the residual heat from combustion), and the fact that, in some cases, losses to a country/region’s energy balance can be easily integrated into district heating networks (which would not be the case in a “fully electric” future), district heating (and cooling) networks and cogeneration could become a key element for a future with greater energy security, while being more sustainable, if appropriate measures were implemented. This book therefore seeks to propose an energy strategy for a number of cities/regions/countries by proposing appropriate measures supported by detailed case studies.


District Energy in Cities

District Energy in Cities

Author: United Nations Environment Programme (UNEP)

Publisher: United Nations

Published: 2016-02-08

Total Pages: 136

ISBN-13: 921060184X

DOWNLOAD EBOOK

This publication provides best practice guidance for cities and national governments to implement sustainable heating and cooling through four chapters on technology, local policy, business models and national policies and regulations, and a fifth chapter describing a methodology for cities to develop modern district energy. The publication is based on interviews, surveys and consultations with nearly 150 respondents from 65 cities around the world in order to gather expert and local stakeholder perspectives.


Book Synopsis District Energy in Cities by : United Nations Environment Programme (UNEP)

Download or read book District Energy in Cities written by United Nations Environment Programme (UNEP) and published by United Nations. This book was released on 2016-02-08 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication provides best practice guidance for cities and national governments to implement sustainable heating and cooling through four chapters on technology, local policy, business models and national policies and regulations, and a fifth chapter describing a methodology for cities to develop modern district energy. The publication is based on interviews, surveys and consultations with nearly 150 respondents from 65 cities around the world in order to gather expert and local stakeholder perspectives.


Renewable Energy for Residential Heating and Cooling

Renewable Energy for Residential Heating and Cooling

Author: Iea-Retd

Publisher: Routledge

Published: 2012-06-25

Total Pages: 266

ISBN-13: 1136537112

DOWNLOAD EBOOK

Heating and cooling represent significant energy loads around the world, with the associated high level of carbon emissions. Many countries have commitments in place to derive an increasing proportion of the energy they use for heating and cooling from renewable sources; some are seeing greater success than others in moving towards these targets. This best practices handbook from the International Energy Agency's Renewable Energy Technology Deployment (RETD) Implementing Agreement provides energy policymakers and professionals in the renewable energy industry with a practical, easy to use guide and toolkit to the most effective policy options for deploying renewable energy for heating and cooling in the residential sector. The book opens with a comparative review of renewable energy for heating and cooling policies in a broad range of IEA member countries in Europe, Asia and North America and then goes on to present the policy approaches of the individual countries and more detailed studies of specific programmes. The second part of the book presents readers with flowcharts which allow them to navigate directly to the best practices which are most relevant to their situation. Planning, design and implementation are all covered, each with examination of the possible barriers that may be faced and the most appropriate policy response used to date. pUlished with IEA-RETD.


Book Synopsis Renewable Energy for Residential Heating and Cooling by : Iea-Retd

Download or read book Renewable Energy for Residential Heating and Cooling written by Iea-Retd and published by Routledge. This book was released on 2012-06-25 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heating and cooling represent significant energy loads around the world, with the associated high level of carbon emissions. Many countries have commitments in place to derive an increasing proportion of the energy they use for heating and cooling from renewable sources; some are seeing greater success than others in moving towards these targets. This best practices handbook from the International Energy Agency's Renewable Energy Technology Deployment (RETD) Implementing Agreement provides energy policymakers and professionals in the renewable energy industry with a practical, easy to use guide and toolkit to the most effective policy options for deploying renewable energy for heating and cooling in the residential sector. The book opens with a comparative review of renewable energy for heating and cooling policies in a broad range of IEA member countries in Europe, Asia and North America and then goes on to present the policy approaches of the individual countries and more detailed studies of specific programmes. The second part of the book presents readers with flowcharts which allow them to navigate directly to the best practices which are most relevant to their situation. Planning, design and implementation are all covered, each with examination of the possible barriers that may be faced and the most appropriate policy response used to date. pUlished with IEA-RETD.


Advances in Solar Heating and Cooling

Advances in Solar Heating and Cooling

Author: Ruzhu Wang

Publisher: Woodhead Publishing

Published: 2016-05-25

Total Pages: 596

ISBN-13: 0081003021

DOWNLOAD EBOOK

Advances in Solar Heating and Cooling presents new information on the growing concerns about climate change, the security of energy supplies, and the ongoing interest in replacing fossil fuels with renewable energy sources. The amount of energy used for heating and cooling is very significant, estimated, for example, as half of final energy consumption in Europe. Solar thermal installations have the potential to meet a large proportion of the heating and cooling needs of both buildings and industry and the number of solar thermal installations is increasing rapidly. This book provides an authoritative review of the latest research in solar heating and cooling technologies and applications. Provides researchers in academia and industry with an authoritative overview of heating and cooling for buildings and industry in one convenient volume Part III, ‘Solar cooling technologies’ is contributed by authors from Shanghai Jiao Tong University, which is a world-leader in this area Covers advanced applications from zero-energy buildings, through industrial process heat to district heating and cooling


Book Synopsis Advances in Solar Heating and Cooling by : Ruzhu Wang

Download or read book Advances in Solar Heating and Cooling written by Ruzhu Wang and published by Woodhead Publishing. This book was released on 2016-05-25 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Solar Heating and Cooling presents new information on the growing concerns about climate change, the security of energy supplies, and the ongoing interest in replacing fossil fuels with renewable energy sources. The amount of energy used for heating and cooling is very significant, estimated, for example, as half of final energy consumption in Europe. Solar thermal installations have the potential to meet a large proportion of the heating and cooling needs of both buildings and industry and the number of solar thermal installations is increasing rapidly. This book provides an authoritative review of the latest research in solar heating and cooling technologies and applications. Provides researchers in academia and industry with an authoritative overview of heating and cooling for buildings and industry in one convenient volume Part III, ‘Solar cooling technologies’ is contributed by authors from Shanghai Jiao Tong University, which is a world-leader in this area Covers advanced applications from zero-energy buildings, through industrial process heat to district heating and cooling


Renewable Heating and Cooling

Renewable Heating and Cooling

Author: Gerhard Stryi-Hipp

Publisher: Elsevier

Published: 2015-11-20

Total Pages: 290

ISBN-13: 1782422188

DOWNLOAD EBOOK

Renewable Heating and Cooling: Technologies and Applications presents the latest information on the generation of heat for industry and domestic purposes, an area where a significant proportion of total energy is consumed. In Europe, this figure is estimated to be almost 50%, with the majority of heat generated by the consumption of fossil fuels. As there is a pressing need to increase the uptake of renewable heating and cooling (RHC) to reduce greenhouse gas emissions, this book provides a comprehensive and authoritative overview on the topic. Part One introduces key RHC technologies and discusses RHC in the context of global heating and cooling demand, featuring chapters on solar thermal process heat generation, deep geothermal energy, and solar cooling technologies. Part Two explores enabling technologies, special applications, and case studies with detailed coverage of thermal energy storage, hybrid systems, and renewable heating for RHC, along with case studies in China and Sweden. Users will find this book to be an essential resource for lead engineers and engineering consultants working on renewable heating and cooling in engineering companies, as well as academics and R&D professionals in private research institutes who have a particular interest in the subject matter. Includes coverage on biomass, solar thermal, and geothermal renewable heating and cooling technologies Features chapters on solar thermal process heat generation, deep geothermal energy, solar cooling technologies, and special applications Presents case studies with detailed coverage of thermal energy storage, hybrid systems, and renewable heating for RHC Explores enabling technologies and special applications


Book Synopsis Renewable Heating and Cooling by : Gerhard Stryi-Hipp

Download or read book Renewable Heating and Cooling written by Gerhard Stryi-Hipp and published by Elsevier. This book was released on 2015-11-20 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Renewable Heating and Cooling: Technologies and Applications presents the latest information on the generation of heat for industry and domestic purposes, an area where a significant proportion of total energy is consumed. In Europe, this figure is estimated to be almost 50%, with the majority of heat generated by the consumption of fossil fuels. As there is a pressing need to increase the uptake of renewable heating and cooling (RHC) to reduce greenhouse gas emissions, this book provides a comprehensive and authoritative overview on the topic. Part One introduces key RHC technologies and discusses RHC in the context of global heating and cooling demand, featuring chapters on solar thermal process heat generation, deep geothermal energy, and solar cooling technologies. Part Two explores enabling technologies, special applications, and case studies with detailed coverage of thermal energy storage, hybrid systems, and renewable heating for RHC, along with case studies in China and Sweden. Users will find this book to be an essential resource for lead engineers and engineering consultants working on renewable heating and cooling in engineering companies, as well as academics and R&D professionals in private research institutes who have a particular interest in the subject matter. Includes coverage on biomass, solar thermal, and geothermal renewable heating and cooling technologies Features chapters on solar thermal process heat generation, deep geothermal energy, solar cooling technologies, and special applications Presents case studies with detailed coverage of thermal energy storage, hybrid systems, and renewable heating for RHC Explores enabling technologies and special applications


Advanced Concepts for Renewable Energy Supply of Data Centres

Advanced Concepts for Renewable Energy Supply of Data Centres

Author: Jaume Salom

Publisher: CRC Press

Published: 2022-09-01

Total Pages: 337

ISBN-13: 1000799352

DOWNLOAD EBOOK

The rapid increase of cloud computing, high performance computing (HPC) and the vast growth in Internet and Social Media use have aroused the interest in energy consumption and the carbon footprint of Data Centres. Data Centres primarily contain electronic equipment used for data processing (servers), data storage (storage equipment), and communications (network equipment). Collectively, this equipment processes, stores, and transmits digital information and is known as information technology (IT) equipment. Advanced Concepts for Renewable Energy Supply of Data Centres introduces a number of technical solutions for the supply of power and cooling energy into Data Centres with enhanced utilisation of renewable energy sources in order to achieve low energy Data Centres. Because of the high energy density nature of these unique infrastructures, it is essential to implement energy efficiency measures and reduce consumption before introducing any renewable energy source. A holistic approach is used with the objective of integrating many technical solutions such as management of the IT (Information Technology) load, efficient electrical supply to the IT systems, Low-Ex air-conditioning systems, interaction with district heating and cooling networks, re-use of heat, free cooling (air, seawater, groundwater), optimal use of heat and cold storage, electrical storage and integration in smart grids. This book is therefore a catalogue of advanced technical concepts that could be integrated into Data Centres portfolio in order to increase the overall efficiency and the share of renewable energies in power and cooling supply. Based on dynamic energy models implemented in TRNSYS some concepts are deeply evaluated through yearly simulations. The results of the simulation are illustrated with Sankey charts, where the energy flows per year within the subsystems of each concept for a selected scenario are shown, and graphs showing the results of parametric analysis. A set of environmental metrics (as the non-renewable primary energy) and financial metrics (CAPEX and OPEX) as well of energy efficiency metrics like the well-known PUE, are described and used to evaluate the different technical concepts.


Book Synopsis Advanced Concepts for Renewable Energy Supply of Data Centres by : Jaume Salom

Download or read book Advanced Concepts for Renewable Energy Supply of Data Centres written by Jaume Salom and published by CRC Press. This book was released on 2022-09-01 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapid increase of cloud computing, high performance computing (HPC) and the vast growth in Internet and Social Media use have aroused the interest in energy consumption and the carbon footprint of Data Centres. Data Centres primarily contain electronic equipment used for data processing (servers), data storage (storage equipment), and communications (network equipment). Collectively, this equipment processes, stores, and transmits digital information and is known as information technology (IT) equipment. Advanced Concepts for Renewable Energy Supply of Data Centres introduces a number of technical solutions for the supply of power and cooling energy into Data Centres with enhanced utilisation of renewable energy sources in order to achieve low energy Data Centres. Because of the high energy density nature of these unique infrastructures, it is essential to implement energy efficiency measures and reduce consumption before introducing any renewable energy source. A holistic approach is used with the objective of integrating many technical solutions such as management of the IT (Information Technology) load, efficient electrical supply to the IT systems, Low-Ex air-conditioning systems, interaction with district heating and cooling networks, re-use of heat, free cooling (air, seawater, groundwater), optimal use of heat and cold storage, electrical storage and integration in smart grids. This book is therefore a catalogue of advanced technical concepts that could be integrated into Data Centres portfolio in order to increase the overall efficiency and the share of renewable energies in power and cooling supply. Based on dynamic energy models implemented in TRNSYS some concepts are deeply evaluated through yearly simulations. The results of the simulation are illustrated with Sankey charts, where the energy flows per year within the subsystems of each concept for a selected scenario are shown, and graphs showing the results of parametric analysis. A set of environmental metrics (as the non-renewable primary energy) and financial metrics (CAPEX and OPEX) as well of energy efficiency metrics like the well-known PUE, are described and used to evaluate the different technical concepts.