Software Engineering For Manufacturing Systems eBook Download PDF

Download Software Engineering For Manufacturing Systems full books in PDF, epub, and Kindle. Read online Software Engineering For Manufacturing Systems ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!

Software Engineering for Manufacturing Systems

Author: A. Storr

Publisher: Springer

Published: 2013-03-09

Total Pages: 204

ISBN-13: 0387350608

DOWNLOAD EBOOK

Software has become a decisive cost and time factor in regard to developing and establishing manufacturing systems and setting them into operation. In addition, software determines the availability, reliability as well as functionality of manufacturing units. Software Engineering for Manufacturing Systems considers the methods and procedures required to deal with problems in the software engineering of control technology for manufacturing systems. Significantly, the following topics are addressed: * definitions and requirements of software for control technology * system design, describing forms of control software * CASE tools for the generation of a code * configuration, adaption of standard software variants, and re-usability of software * and man-machine interface. It contains the selected proceedings of the International Conference on Software Engineering and Case Tools for Control Technology of Manufacturing Systems, sponsored by the IFIP and held in Germany, in March 1996.

Book Synopsis Software Engineering for Manufacturing Systems by : A. Storr

Download or read book Software Engineering for Manufacturing Systems written by A. Storr and published by Springer. This book was released on 2013-03-09 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software has become a decisive cost and time factor in regard to developing and establishing manufacturing systems and setting them into operation. In addition, software determines the availability, reliability as well as functionality of manufacturing units. Software Engineering for Manufacturing Systems considers the methods and procedures required to deal with problems in the software engineering of control technology for manufacturing systems. Significantly, the following topics are addressed: * definitions and requirements of software for control technology * system design, describing forms of control software * CASE tools for the generation of a code * configuration, adaption of standard software variants, and re-usability of software * and man-machine interface. It contains the selected proceedings of the International Conference on Software Engineering and Case Tools for Control Technology of Manufacturing Systems, sponsored by the IFIP and held in Germany, in March 1996.

Software Engineering for Manufacturing Systems

Author: A. Storr

Publisher:

Published: 2014-01-15

Total Pages: 208

ISBN-13: 9781475765397

DOWNLOAD EBOOK

Book Synopsis Software Engineering for Manufacturing Systems by : A. Storr

Download or read book Software Engineering for Manufacturing Systems written by A. Storr and published by . This book was released on 2014-01-15 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Production Software That Works

Author: Ann Courtright

Publisher: Elsevier

Published: 2014-06-28

Total Pages: 225

ISBN-13: 1483296733

DOWNLOAD EBOOK

This useful reference addresses the key tasks that are integral to realtime software development in manufacturing plants: managing the design of the system, setting up and coordinating a development organization, and implementing tools for successful completion and management. Both new and experienced project managers will discover how to use concurrent methodologies to create realtime systems in half the time it usually takes.

Book Synopsis Production Software That Works by : Ann Courtright

Download or read book Production Software That Works written by Ann Courtright and published by Elsevier. This book was released on 2014-06-28 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: This useful reference addresses the key tasks that are integral to realtime software development in manufacturing plants: managing the design of the system, setting up and coordinating a development organization, and implementing tools for successful completion and management. Both new and experienced project managers will discover how to use concurrent methodologies to create realtime systems in half the time it usually takes.

Requirements Engineering for Software and Systems, Second Edition

Author: Phillip A. Laplante

Publisher: CRC Press

Published: 2013-10-17

Total Pages: 326

ISBN-13: 1466560819

DOWNLOAD EBOOK

As requirements engineering continues to be recognized as the key to on-time and on-budget delivery of software and systems projects, many engineering programs have made requirements engineering mandatory in their curriculum. In addition, the wealth of new software tools that have recently emerged is empowering practicing engineers to improve their requirements engineering habits. However, these tools are not easy to use without appropriate training. Filling this need, Requirements Engineering for Software and Systems, Second Edition has been vastly updated and expanded to include about 30 percent new material. In addition to new exercises and updated references in every chapter, this edition updates all chapters with the latest applied research and industry practices. It also presents new material derived from the experiences of professors who have used the text in their classrooms. Improvements to this edition include: An expanded introductory chapter with extensive discussions on requirements analysis, agreement, and consolidation An expanded chapter on requirements engineering for Agile methodologies An expanded chapter on formal methods with new examples An expanded section on requirements traceability An updated and expanded section on requirements engineering tools New exercises including ones suitable for research projects Following in the footsteps of its bestselling predecessor, the text illustrates key ideas associated with requirements engineering using extensive case studies and three common example systems: an airline baggage handling system, a point-of-sale system for a large pet store chain, and a system for a smart home. This edition also includes an example of a wet well pumping system for a wastewater treatment station. With a focus on software-intensive systems, but highly applicable to non-software systems, this text provides a probing and comprehensive review of recent developments in requirements engineering in high integrity systems.

Book Synopsis Requirements Engineering for Software and Systems, Second Edition by : Phillip A. Laplante

Download or read book Requirements Engineering for Software and Systems, Second Edition written by Phillip A. Laplante and published by CRC Press. This book was released on 2013-10-17 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: As requirements engineering continues to be recognized as the key to on-time and on-budget delivery of software and systems projects, many engineering programs have made requirements engineering mandatory in their curriculum. In addition, the wealth of new software tools that have recently emerged is empowering practicing engineers to improve their requirements engineering habits. However, these tools are not easy to use without appropriate training. Filling this need, Requirements Engineering for Software and Systems, Second Edition has been vastly updated and expanded to include about 30 percent new material. In addition to new exercises and updated references in every chapter, this edition updates all chapters with the latest applied research and industry practices. It also presents new material derived from the experiences of professors who have used the text in their classrooms. Improvements to this edition include: An expanded introductory chapter with extensive discussions on requirements analysis, agreement, and consolidation An expanded chapter on requirements engineering for Agile methodologies An expanded chapter on formal methods with new examples An expanded section on requirements traceability An updated and expanded section on requirements engineering tools New exercises including ones suitable for research projects Following in the footsteps of its bestselling predecessor, the text illustrates key ideas associated with requirements engineering using extensive case studies and three common example systems: an airline baggage handling system, a point-of-sale system for a large pet store chain, and a system for a smart home. This edition also includes an example of a wet well pumping system for a wastewater treatment station. With a focus on software-intensive systems, but highly applicable to non-software systems, this text provides a probing and comprehensive review of recent developments in requirements engineering in high integrity systems.

Requirements Engineering for Software and Systems

Author: Phillip A. Laplante

Publisher: CRC Press

Published: 2011-03-23

Total Pages: 266

ISBN-13: 1420064681

DOWNLOAD EBOOK

Solid requirements engineering has become increasingly essential to on-time and on-budget delivery of software and systems projects. As more engineering programs make it a mandatory part of their curricula, students and working engineers require significant training to master the field, especially the complicated emerging ancillary software tools vital to the requirements engineering process. With a focus on software-intensive systems, Requirements Engineering for Software and Systems provides a probing and comprehensive review of recent developments in intelligent systems, soft computing techniques, and their diverse applications in manufacturing. Topics covered can be applied to the requirements engineering practices for: Advanced production machines and systems Collaborative and responsive manufacturing systems Digital manufacturing E-manufacturing E-business and virtual enterprises Fit manufacturing Human machine interfaces Innovative design technologies Intelligent and competitive manufacturing Intelligent planning and scheduling systems Mechatronics and MEMS Micro and nano manufacturing Production automation and control Reconfigurable manufacturing systems Sustainable manufacturing systems Robotics To illustrate key ideas associated with requirements engineering, the text presents three common example systems: an airline baggage handling system, a point-of-sale system for one location of a large pet store chain, and a system for a smart home in which one or more PCs control various aspects of the home’s functions. The selected systems encompass a wide range of applications—from embedded to organic, for both industrial and consumer uses.

Book Synopsis Requirements Engineering for Software and Systems by : Phillip A. Laplante

Download or read book Requirements Engineering for Software and Systems written by Phillip A. Laplante and published by CRC Press. This book was released on 2011-03-23 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid requirements engineering has become increasingly essential to on-time and on-budget delivery of software and systems projects. As more engineering programs make it a mandatory part of their curricula, students and working engineers require significant training to master the field, especially the complicated emerging ancillary software tools vital to the requirements engineering process. With a focus on software-intensive systems, Requirements Engineering for Software and Systems provides a probing and comprehensive review of recent developments in intelligent systems, soft computing techniques, and their diverse applications in manufacturing. Topics covered can be applied to the requirements engineering practices for: Advanced production machines and systems Collaborative and responsive manufacturing systems Digital manufacturing E-manufacturing E-business and virtual enterprises Fit manufacturing Human machine interfaces Innovative design technologies Intelligent and competitive manufacturing Intelligent planning and scheduling systems Mechatronics and MEMS Micro and nano manufacturing Production automation and control Reconfigurable manufacturing systems Sustainable manufacturing systems Robotics To illustrate key ideas associated with requirements engineering, the text presents three common example systems: an airline baggage handling system, a point-of-sale system for one location of a large pet store chain, and a system for a smart home in which one or more PCs control various aspects of the home’s functions. The selected systems encompass a wide range of applications—from embedded to organic, for both industrial and consumer uses.

Re-Engineering the Manufacturing System

Author: Robert E. Stein

Publisher: CRC Press

Published: 2003-06-03

Total Pages: 350

ISBN-13: 0824755820

DOWNLOAD EBOOK

An information systems trailblazer in the domains of decision support and factory and supply chain synchronization, the second edition of Re-Engineering the Manufacturing System stays true to its title, once again bestowing uniquely straightforward instructions for designing, installing, and operating manufacturing information systems. This updated and expanded source takes care to clarify the often blurred concepts of synchronization and optimization and offers implementation advice from four discrete angles to yield better bottom-line results. It shows how to exploit an information system, rolling ERP system implementation into the TOC framework to promote profit materialization.

Book Synopsis Re-Engineering the Manufacturing System by : Robert E. Stein

Download or read book Re-Engineering the Manufacturing System written by Robert E. Stein and published by CRC Press. This book was released on 2003-06-03 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: An information systems trailblazer in the domains of decision support and factory and supply chain synchronization, the second edition of Re-Engineering the Manufacturing System stays true to its title, once again bestowing uniquely straightforward instructions for designing, installing, and operating manufacturing information systems. This updated and expanded source takes care to clarify the often blurred concepts of synchronization and optimization and offers implementation advice from four discrete angles to yield better bottom-line results. It shows how to exploit an information system, rolling ERP system implementation into the TOC framework to promote profit materialization.

Object-oriented Software for Manufacturing Systems

Author: S. Adiga

Publisher: Springer Science & Business Media

Published: 2012-12-06

Total Pages: 280

ISBN-13: 9401148449

DOWNLOAD EBOOK

I must confess that I stumbled upon the object-oriented (00) world view during my explorations into the world of artificial intelligence (AI) in search of a new solution to the problem of building computer-integrated manufacturing systems (CIM). In 00 computing, I found the constructs to model the manufacturing enterprise in terms of information, a resource that is common to all activities in an organization. It offered a level of modularity, and the coupling/binding neces sary for fostering integration without placing undue restrictions on what the individual applications can do. The implications of 00 computing are more extensive than just being a vehicle for manufacturing applications. Leaders in the field such as Brad Cox see it introducing a paradigm shift that will change our world gradually, but as radically as the Industrial Revolution changed manufacturing. However, it must be borne in mind that simply using an object-oriented language or environment does not, in itself, ensure success in one's applications. It requires a different way of thinking, design discipline, techniques, and tools to exploit what the technology has to offer. In other words, it calls for a paradigm shift (as defined by Kuhn in The Structure of Scientific Revolution, a classic text in the history of science).

Book Synopsis Object-oriented Software for Manufacturing Systems by : S. Adiga

Download or read book Object-oriented Software for Manufacturing Systems written by S. Adiga and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: I must confess that I stumbled upon the object-oriented (00) world view during my explorations into the world of artificial intelligence (AI) in search of a new solution to the problem of building computer-integrated manufacturing systems (CIM). In 00 computing, I found the constructs to model the manufacturing enterprise in terms of information, a resource that is common to all activities in an organization. It offered a level of modularity, and the coupling/binding neces sary for fostering integration without placing undue restrictions on what the individual applications can do. The implications of 00 computing are more extensive than just being a vehicle for manufacturing applications. Leaders in the field such as Brad Cox see it introducing a paradigm shift that will change our world gradually, but as radically as the Industrial Revolution changed manufacturing. However, it must be borne in mind that simply using an object-oriented language or environment does not, in itself, ensure success in one's applications. It requires a different way of thinking, design discipline, techniques, and tools to exploit what the technology has to offer. In other words, it calls for a paradigm shift (as defined by Kuhn in The Structure of Scientific Revolution, a classic text in the history of science).

Computer-Aided Design, Engineering, and Manufacturing

Author: Cornelius T. Leondes

Publisher: CRC Press

Published: 2000-12-12

Total Pages: 296

ISBN-13: 9781420050097

DOWNLOAD EBOOK

In the competitive business arena companies must continually strive to create new and better products faster, more efficiently, and more cost effectively than their competitors to gain and keep the competitive advantage. Computer-aided design (CAD), computer-aided engineering (CAE), and computer-aided manufacturing (CAM) are now the industry standard. These seven volumes give the reader a comprehensive treatment of the techniques and applications of CAD, CAE, and CAM.

Book Synopsis Computer-Aided Design, Engineering, and Manufacturing by : Cornelius T. Leondes

Download or read book Computer-Aided Design, Engineering, and Manufacturing written by Cornelius T. Leondes and published by CRC Press. This book was released on 2000-12-12 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the competitive business arena companies must continually strive to create new and better products faster, more efficiently, and more cost effectively than their competitors to gain and keep the competitive advantage. Computer-aided design (CAD), computer-aided engineering (CAE), and computer-aided manufacturing (CAM) are now the industry standard. These seven volumes give the reader a comprehensive treatment of the techniques and applications of CAD, CAE, and CAM.

Computer control of flexible manufacturing systems

Author: S. Joshi

Publisher: Springer Science & Business Media

Published: 2012-12-06

Total Pages: 490

ISBN-13: 9401112304

DOWNLOAD EBOOK

With the approach of the 21st century, and the current trends in manufacturing, the role of computer-controlled flexible manufacturing an integral part in the success of manufacturing enterprises. will take Manufacturing environments are changing to small batch (with batch sizes diminishing to a quantity of one), larger product variety, produc tion on demand with low lead times, with the ability to be 'agile.' This is in stark contrast to conventional manufacturing which has relied on economies of scale, and where change is viewed as a disruption and is therefore detrimental to production. Computer integrated manufac turing (CIM) and flexible manufacturing practices are a key component in the transition from conventional manufacturing to the 'new' manu facturing environment. While the use of computers in manufacturing, from controlling indi vidual machines (NC, Robots, AGVs etc.) to controlling flexible manu facturing systems (FMS) has advanced the flexibility of manufacturing environments, it is still far from reaching its full potential in the environment of the future. Great strides have been made in individual technologies and control of FMS has been the subject of considerable research, but computerized shop floor control is not nearly as flexible or integrated as hyped in industrial and academic literature. In fact, the integrated systems have lagged far behind what could be achieved with existing technology.

Book Synopsis Computer control of flexible manufacturing systems by : S. Joshi

Download or read book Computer control of flexible manufacturing systems written by S. Joshi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the approach of the 21st century, and the current trends in manufacturing, the role of computer-controlled flexible manufacturing an integral part in the success of manufacturing enterprises. will take Manufacturing environments are changing to small batch (with batch sizes diminishing to a quantity of one), larger product variety, produc tion on demand with low lead times, with the ability to be 'agile.' This is in stark contrast to conventional manufacturing which has relied on economies of scale, and where change is viewed as a disruption and is therefore detrimental to production. Computer integrated manufac turing (CIM) and flexible manufacturing practices are a key component in the transition from conventional manufacturing to the 'new' manu facturing environment. While the use of computers in manufacturing, from controlling indi vidual machines (NC, Robots, AGVs etc.) to controlling flexible manu facturing systems (FMS) has advanced the flexibility of manufacturing environments, it is still far from reaching its full potential in the environment of the future. Great strides have been made in individual technologies and control of FMS has been the subject of considerable research, but computerized shop floor control is not nearly as flexible or integrated as hyped in industrial and academic literature. In fact, the integrated systems have lagged far behind what could be achieved with existing technology.

Computer-Aided Design, Engineering, and Manufacturing

Author: Cornelius T. Leondes

Publisher: CRC Press

Published: 2019-08-21

Total Pages: 336

ISBN-13: 9781420049947

DOWNLOAD EBOOK

Book Synopsis Computer-Aided Design, Engineering, and Manufacturing by : Cornelius T. Leondes

Download or read book Computer-Aided Design, Engineering, and Manufacturing written by Cornelius T. Leondes and published by CRC Press. This book was released on 2019-08-21 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the competitive business arena companies must continually strive to create new and better products faster, more efficiently, and more cost effectively than their competitors to gain and keep the competitive advantage. Computer-aided design (CAD), computer-aided engineering (CAE), and computer-aided manufacturing (CAM) are now the industry standa