Download Theory And Applications For Control Of Aerial Robots In Physical Interaction Through Tethers full books in PDF, epub, and Kindle. Read online Theory And Applications For Control Of Aerial Robots In Physical Interaction Through Tethers ebook anywhere anytime directly on your device. Fast Download speed and no annoying ads. We cannot guarantee that every ebooks is available!
This book studies how autonomous aerial robots physically interact with the surrounding environment. Intended to promote the advancement of aerial physical interaction, it analyzes a particular class of aerial robots: tethered aerial vehicles. By examining specific systems, while still considering the challenges of the general problem, it will help readers acquire the knowledge and expertise needed for the subsequent development of more general methods applicable to aerial physical interaction. The formal analysis covers topics ranging from control, state estimation, and motion planning, to experimental validation. Addressing both theoretical and technical aspects, the book is intended for a broad academic and industrial readership, including undergraduate students, researchers and engineers. It can be used as a teaching reference, or as the basis for product development.
Book Synopsis Theory and Applications for Control of Aerial Robots in Physical Interaction Through Tethers by : Marco Tognon
Download or read book Theory and Applications for Control of Aerial Robots in Physical Interaction Through Tethers written by Marco Tognon and published by Springer Nature. This book was released on 2020-06-26 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book studies how autonomous aerial robots physically interact with the surrounding environment. Intended to promote the advancement of aerial physical interaction, it analyzes a particular class of aerial robots: tethered aerial vehicles. By examining specific systems, while still considering the challenges of the general problem, it will help readers acquire the knowledge and expertise needed for the subsequent development of more general methods applicable to aerial physical interaction. The formal analysis covers topics ranging from control, state estimation, and motion planning, to experimental validation. Addressing both theoretical and technical aspects, the book is intended for a broad academic and industrial readership, including undergraduate students, researchers and engineers. It can be used as a teaching reference, or as the basis for product development.
This thesis focuses on the study of autonomous aerial robots interacting with the surrounding environment, and in particular on the design of new control and motion planning methods for such systems. Nowadays, autonomous aerial vehicles are extensively employed in many fields of application but mostly as autonomously moving sensors. On the other hand, in the recent field of aerial physical interaction, the goal is to go beyond sensing-only applications and fully exploit the aerial robots capabilities in order to interact with the environment. With the aim of achieving this goal, this thesis considers the analysis of a particular class of aerial robots interacting with the environment: tethered aerial vehicles. This work focuses on the thorough formal analysis of tethered aerial vehicles ranging from control and state estimation to motion planning. In particular, the differential flatness property of the system is investigated, finding two possible flat outputs that reveal new capabilities of such system for the physical interaction. The theoretical results were finally employed to solve the challenging problem of landing and takeoff on/from a sloped surface. In addition, moved by the interest on aerial physical interaction from A to Z, we addressed supplementary problems related to the design, control and motion planning for aerial manipulators.
Book Synopsis Theory and Applications for Control and Motion Planning of Aerial Robots in Physical Interaction with Particular Focus on Tethered Aerial Vehicles by : Marco Tognon
Download or read book Theory and Applications for Control and Motion Planning of Aerial Robots in Physical Interaction with Particular Focus on Tethered Aerial Vehicles written by Marco Tognon and published by . This book was released on 2018 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis focuses on the study of autonomous aerial robots interacting with the surrounding environment, and in particular on the design of new control and motion planning methods for such systems. Nowadays, autonomous aerial vehicles are extensively employed in many fields of application but mostly as autonomously moving sensors. On the other hand, in the recent field of aerial physical interaction, the goal is to go beyond sensing-only applications and fully exploit the aerial robots capabilities in order to interact with the environment. With the aim of achieving this goal, this thesis considers the analysis of a particular class of aerial robots interacting with the environment: tethered aerial vehicles. This work focuses on the thorough formal analysis of tethered aerial vehicles ranging from control and state estimation to motion planning. In particular, the differential flatness property of the system is investigated, finding two possible flat outputs that reveal new capabilities of such system for the physical interaction. The theoretical results were finally employed to solve the challenging problem of landing and takeoff on/from a sloped surface. In addition, moved by the interest on aerial physical interaction from A to Z, we addressed supplementary problems related to the design, control and motion planning for aerial manipulators.
Aerial robots, meaning robots with flying capabilities, are essentially robotic platforms, which are autonomously controlled via some sophisticated control engineering tools. Similar to aerial vehichles, they can overcome the gravitational forces thanks to their design and/or actuation type. What makes them different from the conventional aerial vehicles, is the level of their autonomy. Reducing the complexity for piloting of such robots/vehicles provide the human operator more freedom and comfort. With their increasing autonomy, they can perform many complicated tasks by their own (such as surveillance, monitoring, or inspection), leaving the human operator the most high-level decisions to be made, if necessary. In this way they can be operated in hazardous and challenging environments, which might posses high risks to the human health. Thanks to their wide range of usage, the ongoing researches on aerial robots is expected to have an increasing impact on the human life. Aerial Physical Interaction (APhI) is a case, in which the aerial robot exerts meaningful forces and torques (wrench) to its environment while preserving its stable flight. In this case, the robot does not try avoiding every obstacle in its environment, but prepare itself for embracing the effect of a physical interaction, furthermore turn this interaction into some meaningful robotic tasks. Aerial manipulation can be considered as a subset of APhI, where the flying robot is designed and controlled in purpose of manipulating its environment. A clear motivation of using aerial robots for physical interaction, is to benefit their great workspace and agility. Moreover, developing robots that can perform not only APhI but also aerial manipulation can bring the great workspace of the flying robots together with the vast dexterity of the manipulating arms. This thesis work is addressing the design, modeling and control problem of these aerial robots for the purpose of physical interaction and manipulation. Using the nonlinear mathematical models of the robots at hand, in this thesis several different control methods (IDA-PBC, Exact Linearization, Differential Flatness Based Control) for APhI and aerial manipulation tasks have been developed and proposed. Furthermore, novel design tools (e.g. new rigid/elastic manipulating arms, hardware, software) to be used together with miniature aerial robots are presented within this thesis, which contributes to the robotics society not only in terms of concrete theory but also practical implementation and experimental robotics.
Book Synopsis Design, Modeling and Control of Aerial Robots for Physical Interaction and Manipulation by : Burak Yüksel
Download or read book Design, Modeling and Control of Aerial Robots for Physical Interaction and Manipulation written by Burak Yüksel and published by Logos Verlag Berlin GmbH. This book was released on 2017-06-10 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerial robots, meaning robots with flying capabilities, are essentially robotic platforms, which are autonomously controlled via some sophisticated control engineering tools. Similar to aerial vehichles, they can overcome the gravitational forces thanks to their design and/or actuation type. What makes them different from the conventional aerial vehicles, is the level of their autonomy. Reducing the complexity for piloting of such robots/vehicles provide the human operator more freedom and comfort. With their increasing autonomy, they can perform many complicated tasks by their own (such as surveillance, monitoring, or inspection), leaving the human operator the most high-level decisions to be made, if necessary. In this way they can be operated in hazardous and challenging environments, which might posses high risks to the human health. Thanks to their wide range of usage, the ongoing researches on aerial robots is expected to have an increasing impact on the human life. Aerial Physical Interaction (APhI) is a case, in which the aerial robot exerts meaningful forces and torques (wrench) to its environment while preserving its stable flight. In this case, the robot does not try avoiding every obstacle in its environment, but prepare itself for embracing the effect of a physical interaction, furthermore turn this interaction into some meaningful robotic tasks. Aerial manipulation can be considered as a subset of APhI, where the flying robot is designed and controlled in purpose of manipulating its environment. A clear motivation of using aerial robots for physical interaction, is to benefit their great workspace and agility. Moreover, developing robots that can perform not only APhI but also aerial manipulation can bring the great workspace of the flying robots together with the vast dexterity of the manipulating arms. This thesis work is addressing the design, modeling and control problem of these aerial robots for the purpose of physical interaction and manipulation. Using the nonlinear mathematical models of the robots at hand, in this thesis several different control methods (IDA-PBC, Exact Linearization, Differential Flatness Based Control) for APhI and aerial manipulation tasks have been developed and proposed. Furthermore, novel design tools (e.g. new rigid/elastic manipulating arms, hardware, software) to be used together with miniature aerial robots are presented within this thesis, which contributes to the robotics society not only in terms of concrete theory but also practical implementation and experimental robotics.
Few years ago, the topic of aerial robots was exclusively related to the robotics community, so a great number of books about the dynamics and control of aerial robots and UAVs have been written. As the control technology for UAVs advances, the great interaction that exists between other systems and elements that are as important as control such as aerodynamics, energy efficiency, acoustics, structural integrity, and applications, among others has become evident. Aerial Robots - Aerodynamics, Control, and Applications is an attempt to bring some of these topics related to UAVs together in just one book and to look at a selection of the most relevant problems of UAVs in a broader engineering perspective.
Book Synopsis Aerial Robots by : Omar D Lopez Mejia
Download or read book Aerial Robots written by Omar D Lopez Mejia and published by BoD – Books on Demand. This book was released on 2017-09-06 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: Few years ago, the topic of aerial robots was exclusively related to the robotics community, so a great number of books about the dynamics and control of aerial robots and UAVs have been written. As the control technology for UAVs advances, the great interaction that exists between other systems and elements that are as important as control such as aerodynamics, energy efficiency, acoustics, structural integrity, and applications, among others has become evident. Aerial Robots - Aerodynamics, Control, and Applications is an attempt to bring some of these topics related to UAVs together in just one book and to look at a selection of the most relevant problems of UAVs in a broader engineering perspective.
This book addresses the topic of autonomous flying robots physically interacting with the environment under the influence of wind. It aims to make aerial robots aware of the disturbance, interaction, and faults acting on them. This requires reasoning about the external wrench (force and torque) acting on the robot and distinguishing between wind, interactions, and collisions. The book takes a model-based approach and covers a systematic approach to parameter identification for flying robots. The book aims to provide a wind speed estimate independent of the external wrench, including estimating the wind speed using motor power measurements. Aerodynamics modeling is approached in a data-driven fashion, using ground-truth measurements from a 4D wind tunnel. Finally, the book bridges the gap between trajectory tracking and interaction control, to allow physical interaction under wind influence. Theoretical results are accompanied by extensive simulation and experimental results.
Book Synopsis Model-Based Control of Flying Robots for Robust Interaction Under Wind Influence by : Teodor Tomić
Download or read book Model-Based Control of Flying Robots for Robust Interaction Under Wind Influence written by Teodor Tomić and published by Springer Nature. This book was released on 2022-10-07 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the topic of autonomous flying robots physically interacting with the environment under the influence of wind. It aims to make aerial robots aware of the disturbance, interaction, and faults acting on them. This requires reasoning about the external wrench (force and torque) acting on the robot and distinguishing between wind, interactions, and collisions. The book takes a model-based approach and covers a systematic approach to parameter identification for flying robots. The book aims to provide a wind speed estimate independent of the external wrench, including estimating the wind speed using motor power measurements. Aerodynamics modeling is approached in a data-driven fashion, using ground-truth measurements from a 4D wind tunnel. Finally, the book bridges the gap between trajectory tracking and interaction control, to allow physical interaction under wind influence. Theoretical results are accompanied by extensive simulation and experimental results.
In recent years, the subject of physical interaction for aerial robots has been a popular research area with many new mechanical designs and control approaches being proposed. The aerial robotics community is currently observing a paradigm shift from classic guidance, navigation, and control tasks towards more unusual tasks, for example requesting aerial robots to physically interact with the environment, thus extending the manipulation task from the ground into the air. This thesis contributes to the field of aerial manipulation by proposing a novel concept known has Multiple Aerial-Ground Manipulator System or MAGMaS, including what appears to be the first experimental demonstration of a MAGMaS and opening a new route of research. The motivation behind associating ground and aerial robots for cooperative manipulation is to leverage their respective particularities, ground robots bring strength while aerial robots widen the workspace of the system. The first contribution of this work introduces a meticulous system model for MAGMaS. The system model's properties and potential extensions are discussed in this work. The planning, estimation and control methods which are necessary to exploit MAGMaS in a cooperative manipulation tasks are derived. This works proposes an optimal control allocation scheme to exploit the MAGMaS redundancies and a general model-based force estimation method is presented. All of the proposed techniques reported in this thesis are integrated in a global architecture used for simulations and experimental validation. This architecture is extended by the addition of a tele-presence framework to allow remote operations of MAGMaS. The global architecture is validated by robust demonstrations of bar lifting, an application that gives an outlook of the prospective use of the proposed concept of MAGMaS. Another contribution in the development of MAGMaS consists of an exploratory study on the flexibility of manipulated loads. A vibration model is derived and exploited to showcase vibration properties in terms of control. The last contribution of this thesis consists of an exploratory study on the use of elastic joints in aerial robots, endowing these systems with mechanical compliance and energy storage capabilities. Theoretical groundings are associated with a nonlinear controller synthesis. The proposed approach is validated by experimental work which relies on the integration of a lightweight variable stiffness actuator on an aerial robot.
Book Synopsis Models, Algorithms and Architectures for Cooperative Manipulation with Aerial and Ground Robots by : Nicolas Staub
Download or read book Models, Algorithms and Architectures for Cooperative Manipulation with Aerial and Ground Robots written by Nicolas Staub and published by . This book was released on 2018 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, the subject of physical interaction for aerial robots has been a popular research area with many new mechanical designs and control approaches being proposed. The aerial robotics community is currently observing a paradigm shift from classic guidance, navigation, and control tasks towards more unusual tasks, for example requesting aerial robots to physically interact with the environment, thus extending the manipulation task from the ground into the air. This thesis contributes to the field of aerial manipulation by proposing a novel concept known has Multiple Aerial-Ground Manipulator System or MAGMaS, including what appears to be the first experimental demonstration of a MAGMaS and opening a new route of research. The motivation behind associating ground and aerial robots for cooperative manipulation is to leverage their respective particularities, ground robots bring strength while aerial robots widen the workspace of the system. The first contribution of this work introduces a meticulous system model for MAGMaS. The system model's properties and potential extensions are discussed in this work. The planning, estimation and control methods which are necessary to exploit MAGMaS in a cooperative manipulation tasks are derived. This works proposes an optimal control allocation scheme to exploit the MAGMaS redundancies and a general model-based force estimation method is presented. All of the proposed techniques reported in this thesis are integrated in a global architecture used for simulations and experimental validation. This architecture is extended by the addition of a tele-presence framework to allow remote operations of MAGMaS. The global architecture is validated by robust demonstrations of bar lifting, an application that gives an outlook of the prospective use of the proposed concept of MAGMaS. Another contribution in the development of MAGMaS consists of an exploratory study on the flexibility of manipulated loads. A vibration model is derived and exploited to showcase vibration properties in terms of control. The last contribution of this thesis consists of an exploratory study on the use of elastic joints in aerial robots, endowing these systems with mechanical compliance and energy storage capabilities. Theoretical groundings are associated with a nonlinear controller synthesis. The proposed approach is validated by experimental work which relies on the integration of a lightweight variable stiffness actuator on an aerial robot.
This book constitutes revised selected papers of the 20th International Conference on Information Technologies and Mathematical Modelling, ITMM 2021, named after A.F. Terpugov, held in Tomsk, Russia, in December 2021. Due to the COVID-19 pandemic the conference was held in a virtual mode. The 28 full papers presented in this volume were carefully reviewed and selected from 89 submissions. The conference covers various aspects of information technologies, focusing on queueing theory, stochastic processes, Markov processes, renewal theory, network performance equation and network protocols.
Book Synopsis Information Technologies and Mathematical Modelling. Queueing Theory and Applications by : Alexander Dudin
Download or read book Information Technologies and Mathematical Modelling. Queueing Theory and Applications written by Alexander Dudin and published by Springer Nature. This book was released on 2022-06-23 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes revised selected papers of the 20th International Conference on Information Technologies and Mathematical Modelling, ITMM 2021, named after A.F. Terpugov, held in Tomsk, Russia, in December 2021. Due to the COVID-19 pandemic the conference was held in a virtual mode. The 28 full papers presented in this volume were carefully reviewed and selected from 89 submissions. The conference covers various aspects of information technologies, focusing on queueing theory, stochastic processes, Markov processes, renewal theory, network performance equation and network protocols.
This book highlights the latest innovations and applications in robotics, as presented by leading international researchers and engineers at the ROMANSY 2022, the 24th CISM IFToMM Symposium on Theory and Practice of Robots and Manipulators, held in Udine, Italy, on July 4–7, 2022. The ROMANSY symposium is the first established conference that focuses on robotics theory and research, rather than industrial aspects. Bringing together researchers from a broad range of countries, the symposium is held bi-annually and plays a vital role in the development of the theory and practice of robotics, as well as the mechanical sciences. ROMANSY 2022 marks the 24th instalment in a series that began in 1973.
Book Synopsis ROMANSY 24 - Robot Design, Dynamics and Control by : Andrés Kecskeméthy
Download or read book ROMANSY 24 - Robot Design, Dynamics and Control written by Andrés Kecskeméthy and published by Springer Nature. This book was released on 2022-06-22 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the latest innovations and applications in robotics, as presented by leading international researchers and engineers at the ROMANSY 2022, the 24th CISM IFToMM Symposium on Theory and Practice of Robots and Manipulators, held in Udine, Italy, on July 4–7, 2022. The ROMANSY symposium is the first established conference that focuses on robotics theory and research, rather than industrial aspects. Bringing together researchers from a broad range of countries, the symposium is held bi-annually and plays a vital role in the development of the theory and practice of robotics, as well as the mechanical sciences. ROMANSY 2022 marks the 24th instalment in a series that began in 1973.
Book Synopsis New Trends in Mechanism and Machine Science by : Giulio Rosati
Download or read book New Trends in Mechanism and Machine Science written by Giulio Rosati and published by Springer Nature. This book was released on with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt:
This book deals with the study of tilt-rotor omnidirectional aerial robots and their application to aerial physical interaction tasks. Omnidirectional aerial robots possess decoupled translational and rotational dynamics, which are important for stable and sustained aerial interaction. The additional ability to dynamically re-orient thrust vectors opens the door to a wide array of possible morphologies and system capabilities. Through modeling, control, prototype design, and experimental evaluation, this book presents a comprehensive methodology and examples for the development of a novel tilt-rotor aerial manipulator. This work serves as a guide for envisioning and constructing innovative systems that will advance the frontier of aerial manipulation.
Book Synopsis Omnidirectional Tilt-Rotor Flying Robots for Aerial Physical Interaction by : Karen Bodie
Download or read book Omnidirectional Tilt-Rotor Flying Robots for Aerial Physical Interaction written by Karen Bodie and published by Springer Nature. This book was released on 2024-01-21 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the study of tilt-rotor omnidirectional aerial robots and their application to aerial physical interaction tasks. Omnidirectional aerial robots possess decoupled translational and rotational dynamics, which are important for stable and sustained aerial interaction. The additional ability to dynamically re-orient thrust vectors opens the door to a wide array of possible morphologies and system capabilities. Through modeling, control, prototype design, and experimental evaluation, this book presents a comprehensive methodology and examples for the development of a novel tilt-rotor aerial manipulator. This work serves as a guide for envisioning and constructing innovative systems that will advance the frontier of aerial manipulation.
